in ACAD 2013 if I use object tracking to space an object or dimension (or anything, really), as soon as type on any key the tracking goes away. What can I do to change this? I do not have this problem in 2012.
View 4 Repliesusing autocad 2013.
is there 3D object snap tracking?
I really like the object snap tracking feature to snap between 2 points intersecting but I find it overly sensitive and hard to get it right the first time.
Is there a way to turn down the sensitivity? I use this feature frequently.
I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies View RelatedHaving trouble with object snap tracking. At times i am given distances from other objects to work with- which is what i am after.
However in some instances only the model space coordinates are displayed- not distances. Is there any way to ensure that only distances appear?
I am having trouble locking onto a temporary tracking point in autocad 2011. I can't seem to find the start tracking icon and it doesn't recognize the 'TT' command. I have a tracking line, I just can't seem to do it in two dimensions.
View 2 Replies View RelatedI used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
There ought to be a way to do this, but I don't see how: I record forums, and the presenter frequently wanders back and forth across the stage. I can use the motion tracker to track his wanderings (since the camera is set to a fairly wide angle). What I want to do with the motion tracking information is have the presenter's clip pan back and forth as he walks forth and back - with the net result that he stays in the center of the screen. (I'd use a zoomed portion of the image so that there would be enough to fill the frame.
Is there a way to do this? It would make forum recording so much easier.
When the wind space warp is used, what series of mathematical equations or algorithms is 3ds Max invoking to generate motion based on an input force, turbulence value, etc.?
Are traditional fluid dynamics equations embedded into the calculation process? Is there any way to specifically see how the wind force (strength) and turbulence are interpreted to cause the modeled motion?
Is there any way to switch between wind force (strength) and wind velocity?
Lastly, if one were to have an object billowing in a breeze, is there any way to track the coordinates of a vertex at each point in time? The closest I've come is manually extracting the object's box dimensions at each interval - I would prefer to track how a fixed point on the object moves over time.
I have AutoCAD LT 2011 and a 3D Connexion space navigator. My problem is that whenever I move the mouse, the command that I'm currently on gets canceled. For example, if I am moving something and it's asking me for the target location and I move the 3d mouse to navigate there, I get canceled out of the move command. This essentially means I can't use my 3d mouse for commands (a big problem!).
View 5 Replies View RelatedFor no reason that I can fathom, everytime I try to plot a drawing, whether to PDF file or to printer, the command self terminates after I hit enter. This only just started happening during the last couple of days. Now it happens every time I try to plot a drawing.
View 4 Replies View RelatedI imported data from a SHP file to a base drawing I plan to use to attach, and I wanted to replace data points with data symbol definition blocks. However, when I create a symbol style and try to edit it by double-clicking, I get a *Cancel* on the command line and nothing happends. When I pressing the "Style" button on the Display Manager tab in the Task Pane, same thing.I suspect that I missed a step - or several - along the way of importing the SHP file.
View 2 Replies View RelatedI am trying to "save as" a dxf several shapes in a drawing. Except that when I use my mouse wheel to zoom in, I get this odd message:
"xxx.dwg" has a command in progress. Hit enter to cancel or [Retry]: *Cancel*
Never had this happen until this morning.
For some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I am testing the LT 2012 version in Windows. I want to use the pan command which used to be a easily visible button, one click. In 2012 I have to go to View>Pan to acess the button, 2 clicks, If I type P I get a popup menu with every command starting with a P, with Pan at the top, click on Pan, 2 clicks again.
So, can I move the Pan button to the Home tab to make it simpler? Can I edit something so when I type P it knows I mean Pan and don't have to make another choice?
This is really slowing down my process and work flow, it's like stutter! Used to be a seamless flow of click, click, click. Now it is click, pause, search, click, pause, search, click.
Out of the blue today, my OSNAP shortcuts disappeared. Whenever I'd bring up the menu, I could not hit the E key on the keyboard for Endpoint or any other shortcut keystroke. Upon more research, this applied to all menus. Turns out this is not an Autodesk issue but a Windows setting. Here's how to restore if you encounter this as well.
1. Hit the Windows + U keys to bring up the Ease of Accees Center
2. Click on "Make the keyboard easier to use
3. Check Underline keyboard shortcuts and access keys
im using the tool palette, i want to assaign a keystroke to the tools i place there. how to do it?
View 9 Replies View Relatedruning autocad 2010, i want to create a keystroke to hide /show a specific layer, how can i do it?
View 5 Replies View RelatedProduct: AutoCAD 2014
OS: Windows 7 64bit
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
What is the keystroke for moving up and down in snapshots?
Appearantly arrows are not good enough.
I'm not that good at typing and when I make a mistake in Photoshop CS6, suddenly find myself in a strange place from which I often don't know how to return from. I use about twenty keystroke commands, but there are so many others I don't use and which cause me problems.
Is there someplace on CS6 to turn off those commands I never use?
In previous versions, when in the file requester, with the File Type field focused, I could type the first letter of the format I wanted (ex. J for Jpeg), and it would select it. That was a nice little feature that sped up the saving process (...didn't have to open up the File Type pulldown, and scroll through the selections until I found the one I wanted).
Is that now gone in CS3 (extended), or is there some setting I can change to get that back?
In shortcuts or preferences, is there a keystroke which would activate the "close without saving" button??
View 2 Replies View RelatedAccording to the menu, this keystroke is shift command E (Mac). Does not work at all.
View 12 Replies View RelatedCommand 'R' to render out a clip? Each time I do it Premiere Pro whips me back to the start of the timeline. I've started up a new project.
I'm wondering if Premiere Pro will have a plist file, mmm, maybe I will go look ..
using the FCP7 keystrokes in PP CS6.
Is there a keystroke to get to layers blend mode.
View 1 Replies View RelatedI'm trying to use CTRL+A;Delete;CTRL+D key combination in order to clear the content of the active layer. When I'm doing it manually via the keyboard, the results are as expected.
But when I feed this and a sequence of keystrokes to one of my Wacom tablet keys: If the pointer is off canvas nothing happens, and if it's over the canvas, the canvas gets surrounded by a blue border, same as if I were holding down the CTRL key alone for selecting the whole layer.
Which key combination should yield the expected result via a table keystroke?
when drawing lines or moving something, what looks like a tracking point will pop up but then won't go away, it's not selectable, and regen won't get rid of it. a save and reopen is the only way it goes away.
it only does this in 2 of the user log in names, and it's worse in the other one. it puts the x everywhere you click. here's a screen capture of what's going on. the brown x over in the upper right is the trouble. it used to be on one of the lines, but on a regen moved to there. this was just random lines and moving the mouse around to acquire snap and tracking points.
autocad 2008, windows xp pro
I´m working with AutoCAD Map 3D 2013 on Windows 7 and when I use Coordinate Tracking I used to get fatal errors.The error occurs when trying to select a category from the list in the panel on the left. Strange enough, the error doesn´t occur when I first right-click in the list.
View 2 Replies View RelatedI'm working in Autocad 2009 full, I've "polar tracking" ON, "Object snap", as well as "Object snap tracking" but still my polar tracking doesn't work. How to resolve this problem?
View 9 Replies View RelatedAll my polar tracking options are turned to Zero.
strangly enough its does give me one tracking option (read line) wile drawing at 5°
and when i draw a square it seems like my plane is off a bit (prolly 5°, looks like a perspective)
Tried fiddling around with the DSETTINGS command but nothing goes.
so i s my plane off, UCS off, also i get sometimes 1 out of 10 times an innorect SNAP ( snap to a point and its off by a 0,x margin. i