For no reason that I can fathom, everytime I try to plot a drawing, whether to PDF file or to printer, the command self terminates after I hit enter. This only just started happening during the last couple of days. Now it happens every time I try to plot a drawing.
View 4 RepliesI want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
For some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I'm using a position field as an attribute for a block. This is what I use:
%<AcObjProp.16.2 Object(%<\_ObjId 2118086344>%).InsertionPoint f "%lu2%pt2%pr4%ps[+, M]%ct8[0.001]">%
What I would like to do is an arithmetic operation of addition, something similar to how 'CAL works. In this particular case I would like to add the value of 100,000 before the conversion factor, or 100 after the conversion factor.
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedI have AutoCAD LT 2011 and a 3D Connexion space navigator. My problem is that whenever I move the mouse, the command that I'm currently on gets canceled. For example, if I am moving something and it's asking me for the target location and I move the 3d mouse to navigate there, I get canceled out of the move command. This essentially means I can't use my 3d mouse for commands (a big problem!).
View 5 Replies View Relatedin ACAD 2013 if I use object tracking to space an object or dimension (or anything, really), as soon as type on any key the tracking goes away. What can I do to change this? I do not have this problem in 2012.
View 4 Replies View RelatedI imported data from a SHP file to a base drawing I plan to use to attach, and I wanted to replace data points with data symbol definition blocks. However, when I create a symbol style and try to edit it by double-clicking, I get a *Cancel* on the command line and nothing happends. When I pressing the "Style" button on the Display Manager tab in the Task Pane, same thing.I suspect that I missed a step - or several - along the way of importing the SHP file.
View 2 Replies View RelatedI am trying to "save as" a dxf several shapes in a drawing. Except that when I use my mouse wheel to zoom in, I get this odd message:
"xxx.dwg" has a command in progress. Hit enter to cancel or [Retry]: *Cancel*
Never had this happen until this morning.
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Having a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.
Is it possible to plot using a few different .ctb files? For example can I assign one .ctb file to the landscape xref drawing and another .ctb file to the architectural xref drawing and a third .ctb file to the civil xref drawings? It has been very time consuming to coordinate all the separate drawings to use one .ctb file.
View 2 Replies View RelatedI can not plot in color! Using Civil3d 2012 64 bit. Plotting to a HP DesignJet 5500 which I think is set to use the new driver for 64 bit. I have tried everything I know. Been doing this many years and I have never ran into this one. Used CTB ACAD, None and tweaked a few of my own. The funny thing is if I have an image that will plot in color and the other funny thing is I can send the same plot to a HP Color LaserJet 5550 PS (standard office size) and the dwg plots just fine in color so I'm thinking it has something to do with the 64 bit side of things.
OS=WIN7
I just moved from ACAD 2008 to 2010. I for the life of me cannot figure out how to plot my drawings to a monochrome (black and white) drawing/PDF. Every plot comes out as by layer colored plots.
I have tried using Page Setup Manager and created a (or what I thought was a) monochrome .stb file. However, even with the mono.stb file selected the plots still plot in color.Is it possible to configure a .stb file to plot in only black?
I am trying to plot over 100 drawings to PDF. They are mechanical drawings and the details need to be clear. I tried a batch plot, but when printed in 11x17, everything is a bit fuzzy on the PDF. I tried a PDF convertor, and it was very clear, but it put a large, "Free Trail" logo in the center, ha.
View 7 Replies View RelatedI have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
I'm tring to plot 26 or so sheets into a single pdf or multiple pdfs and I get this error every time with no file being created.
Job: - Canceled
Job ID: 1
Sheet set name:
Date and time started: 5/3/2011 11:48:29 AM
Date and time completed: 5/3/2011 11:48:33 AM
UserID: RGDC99
Profile ID: AutoCAD MEP (US Imperial)
Total sheets: 2
Sheets plotted: 1
Number of errors: 1
Number of warnings: 0
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ALERT.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Plotted with Error(s)
File: Z:\_xxxxx\_xxxxx2011 ProjectsxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
ERROR: Internal Error: Null Pointer
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ERROR.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Error(s) Did Not Plot
File: Z:\_xxxxx\_xxxx2011 ProjectsxxxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedIs there a limit to how many drawing files one can send when using the publish command? Using ACAD 2010.
View 1 Replies View RelatedI have been trying to plot as a PDF an isometric view from CAD. I am using CAP Studio for these 3D symbols and for some reason even though I have monchrome.ctb selected under Plot Style Table my PDF is printing in color, not all black.
View 9 Replies View RelatedAm configuring many page setups and when printing/plotting there is a checkbox to scale lineweights. Was wondering what the consensus is on this. Should the check scale line weights box be checked, or not?
View 5 Replies View Relatedmy DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies View Relatedi want to know how to enable those options for shaded plot.
View 1 Replies View RelatedEvery time I try to print or preview the following error appears and no error code or log comes after.
I already instaled SP1, changed acad.ctb e use other templates.
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
Last week we started having an issue with one of the AutoCAD 2010 installs, When she would go to plot (to any plotter or PDF) the plot process would just hang up and continue to show (in the lower right corner) that it was working, sometimes it would actually print the page but it wouldn't format it right, This morning a second install started doing it too. I chacked and ran though the proceedure for ACAD.VLX virus and it still is doing this. After autocad sits there for a minute showing the plot process the addons reload. I have tried plotting with no addons loaded and I am still getting the same problem.
Machine software config:
Windows 7 64 bit
Autocad 2010 32bit loaded
Microvellum 6.7 addon
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View RelatedI'm trying to export all my layouts in a drawings to PDF. I'm using EXPORTPDF from the Output tab.
If I'm exporting the current layout, or if I'm creating a multi-sheet PDF, the plot stamp shows up. I get the 'Save as PDF' dialog box where I can tick "Include plot stamp".
However, if I export all layouts as single-sheet, this dialog doesn't appear and the plot stamp is not on the PDF produced.
When plotting and doing a 'plot preview' Acad crashes. This happens with ALL dwgs no matter which of our 2 printers is chosen. This is only happening to one computer in the office. All computers are running Windows 7 Professional with AutoCAD Civil 3d 2011. If the plot is sent without a preview everything if fine with no crash.
View 4 Replies View RelatedWhen I try to open or create drawings in autocad (which i downloaded recently from the edu community) it gives me a warning which says "the drawing file being opened was not created by a product from an autodesk education suite. if you save this drawing it will always be plotted with the follow plot stamp: produced by an autodesk education program.it is recommended that you save this drawing with a different file name." but I have saved and resaved drawings, tried different extensions and still it won't plot or print without this plot stamp. What is most likely causing it and what can I do to remove it.
View 7 Replies View Related