I'm trying to export all my layouts in a drawings to PDF. I'm using EXPORTPDF from the Output tab.
If I'm exporting the current layout, or if I'm creating a multi-sheet PDF, the plot stamp shows up. I get the 'Save as PDF' dialog box where I can tick "Include plot stamp".
However, if I export all layouts as single-sheet, this dialog doesn't appear and the plot stamp is not on the PDF produced.
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Having a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.
Is it possible to plot using a few different .ctb files? For example can I assign one .ctb file to the landscape xref drawing and another .ctb file to the architectural xref drawing and a third .ctb file to the civil xref drawings? It has been very time consuming to coordinate all the separate drawings to use one .ctb file.
View 2 Replies View RelatedI can not plot in color! Using Civil3d 2012 64 bit. Plotting to a HP DesignJet 5500 which I think is set to use the new driver for 64 bit. I have tried everything I know. Been doing this many years and I have never ran into this one. Used CTB ACAD, None and tweaked a few of my own. The funny thing is if I have an image that will plot in color and the other funny thing is I can send the same plot to a HP Color LaserJet 5550 PS (standard office size) and the dwg plots just fine in color so I'm thinking it has something to do with the 64 bit side of things.
OS=WIN7
I just moved from ACAD 2008 to 2010. I for the life of me cannot figure out how to plot my drawings to a monochrome (black and white) drawing/PDF. Every plot comes out as by layer colored plots.
I have tried using Page Setup Manager and created a (or what I thought was a) monochrome .stb file. However, even with the mono.stb file selected the plots still plot in color.Is it possible to configure a .stb file to plot in only black?
I am trying to plot over 100 drawings to PDF. They are mechanical drawings and the details need to be clear. I tried a batch plot, but when printed in 11x17, everything is a bit fuzzy on the PDF. I tried a PDF convertor, and it was very clear, but it put a large, "Free Trail" logo in the center, ha.
View 7 Replies View RelatedI have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
I'm tring to plot 26 or so sheets into a single pdf or multiple pdfs and I get this error every time with no file being created.
Job: - Canceled
Job ID: 1
Sheet set name:
Date and time started: 5/3/2011 11:48:29 AM
Date and time completed: 5/3/2011 11:48:33 AM
UserID: RGDC99
Profile ID: AutoCAD MEP (US Imperial)
Total sheets: 2
Sheets plotted: 1
Number of errors: 1
Number of warnings: 0
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ALERT.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Plotted with Error(s)
File: Z:\_xxxxx\_xxxxx2011 ProjectsxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
ERROR: Internal Error: Null Pointer
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ERROR.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Error(s) Did Not Plot
File: Z:\_xxxxx\_xxxx2011 ProjectsxxxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
I know that there are websites online that allow you to download free brushes and stamps.
However, whenever I try downloading them, I can't figure out how to get them onto Photoshop to use.
Does anyone know how to get these free downloadable brushes and stamps into Photoshop to be used?
could some one post a quick tutorial on how to make stamps. (like the ones that say approved and things like that) i found one a while ago but i cant find it anymore. anyone help would be amazine as its for splash.
View 1 Replies View RelatedI have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedIs there a limit to how many drawing files one can send when using the publish command? Using ACAD 2010.
View 1 Replies View RelatedI have been trying to plot as a PDF an isometric view from CAD. I am using CAP Studio for these 3D symbols and for some reason even though I have monchrome.ctb selected under Plot Style Table my PDF is printing in color, not all black.
View 9 Replies View RelatedAm configuring many page setups and when printing/plotting there is a checkbox to scale lineweights. Was wondering what the consensus is on this. Should the check scale line weights box be checked, or not?
View 5 Replies View Relatedmy DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies View Relatedi want to know how to enable those options for shaded plot.
View 1 Replies View RelatedEvery time I try to print or preview the following error appears and no error code or log comes after.
I already instaled SP1, changed acad.ctb e use other templates.
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
Last week we started having an issue with one of the AutoCAD 2010 installs, When she would go to plot (to any plotter or PDF) the plot process would just hang up and continue to show (in the lower right corner) that it was working, sometimes it would actually print the page but it wouldn't format it right, This morning a second install started doing it too. I chacked and ran though the proceedure for ACAD.VLX virus and it still is doing this. After autocad sits there for a minute showing the plot process the addons reload. I have tried plotting with no addons loaded and I am still getting the same problem.
Machine software config:
Windows 7 64 bit
Autocad 2010 32bit loaded
Microvellum 6.7 addon
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View RelatedWhen plotting and doing a 'plot preview' Acad crashes. This happens with ALL dwgs no matter which of our 2 printers is chosen. This is only happening to one computer in the office. All computers are running Windows 7 Professional with AutoCAD Civil 3d 2011. If the plot is sent without a preview everything if fine with no crash.
View 4 Replies View RelatedWhen I try to open or create drawings in autocad (which i downloaded recently from the edu community) it gives me a warning which says "the drawing file being opened was not created by a product from an autodesk education suite. if you save this drawing it will always be plotted with the follow plot stamp: produced by an autodesk education program.it is recommended that you save this drawing with a different file name." but I have saved and resaved drawings, tried different extensions and still it won't plot or print without this plot stamp. What is most likely causing it and what can I do to remove it.
View 7 Replies View RelatedAutoCAD MEP 2010
I've used batch plot to make pdf copies of my drawings in version 2004 and did not have this issue:
In 2010 when I use batch plot to pdf (say for 5 drawings), it produces one single pdf file with 5 sheets. I want an individual pdf file for each drawing (5 pdfs).
I don't want to have to open each drawing and plot. That's what batch plot is for!
I am having a problem getting PDFs to plot when I have plot transparency on.
I use the dwg to pdf plot function and with plot transparency on... my hatches work perfectly but my PDFs appears very much screened. (As a 50% or more screen would look) If I turn off the plot transparency, the pdf works perfectly but of course my hatch shades obliterate any line work beneath them.
I was able to convert the PDF to a .tiff, with a graphics program... increase the resolution to 600dpi and use imageattach to bring that in. But it is an extra step for each insert and increased dpi = increased file size.
Other than increasing the resolution on the PDF, any way around this "screening" issue on PDFs when plotting with transparency on?
For no reason that I can fathom, everytime I try to plot a drawing, whether to PDF file or to printer, the command self terminates after I hit enter. This only just started happening during the last couple of days. Now it happens every time I try to plot a drawing.
View 4 Replies View RelatedI am doing a site for a travel company and a lot of their print work includes passport stamps on scenic pictures. They want to mimic that look for their website. However, to make my job easier and to make more accurate stamps, is there any fonts, brush, or stamp sets that have some passport stamps?
View 1 Replies View RelatedI've been using Mudbox mostly for texturing, but now I need to use it at work for sculpting.
1) How do I set the mid value of custom stamps. I want the stamp to effect on the surface in the negative and positive, so my neutral areas are 50% grey, black is sculpting down, and white is sculpting up. In Zbrush I would just set the mid value to 50, but in Mudbox it seems I can ony sculpt one at a time, either up, or the inverse down. Is there a way for me to do it like in zbrush?
2) I want to affect certain areas of my mesh without affecting others, like lips or eyelids. I know I can mask off or freeze certain areas so I can adjust, but it's just one more step I don't have time for. Zbrush has a topology setting for the brushes so that you can grab or move the upper lip without affecting the lower lip, and etc... Is there a setting in Mudbox to do something similar or do I have to resort to masking and freezing?