could some one post a quick tutorial on how to make stamps. (like the ones that say approved and things like that) i found one a while ago but i cant find it anymore. anyone help would be amazine as its for splash.
View 1 RepliesI have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
I know that there are websites online that allow you to download free brushes and stamps.
However, whenever I try downloading them, I can't figure out how to get them onto Photoshop to use.
Does anyone know how to get these free downloadable brushes and stamps into Photoshop to be used?
I am doing a site for a travel company and a lot of their print work includes passport stamps on scenic pictures. They want to mimic that look for their website. However, to make my job easier and to make more accurate stamps, is there any fonts, brush, or stamp sets that have some passport stamps?
View 1 Replies View RelatedI've been using Mudbox mostly for texturing, but now I need to use it at work for sculpting.
1) How do I set the mid value of custom stamps. I want the stamp to effect on the surface in the negative and positive, so my neutral areas are 50% grey, black is sculpting down, and white is sculpting up. In Zbrush I would just set the mid value to 50, but in Mudbox it seems I can ony sculpt one at a time, either up, or the inverse down. Is there a way for me to do it like in zbrush?
2) I want to affect certain areas of my mesh without affecting others, like lips or eyelids. I know I can mask off or freeze certain areas so I can adjust, but it's just one more step I don't have time for. Zbrush has a topology setting for the brushes so that you can grab or move the upper lip without affecting the lower lip, and etc... Is there a setting in Mudbox to do something similar or do I have to resort to masking and freezing?
Today I need to reinstall the Mudbox 2012 64 bits in D:/Autodesk/Mudbox 2012/ isntead de default installation directory in C:,due at Hard disk space problems.
The programs stars well,an remembers my works in progress at the start,but shows the warning that you can see in the image attached.
I just tried to modify the Paths in the preferences menu,but at restart,the same Warning message appears.Simply,the program ignores the path that I enter in the Paths dialog.
I tried deleting the path file in the C:/Users/Sergio/Documents/Mudbox/2012-x64, but, at restart,the same message appears...What I should do for Mudbox recognize the Stamps and Stencil Path in D:?
As usual, i scaled my base model 10 times before importing in Mudbox for sculpting.But, when i reached about 10 mil polys (level 6) and started adding high freq details, i noticed that stamps have no effect on the model.It's like i never activated them.This happens with all the default and custom stamps i have.I get only the effect of the brush without the stamp.
Only knife brush seem to work and also its stamp works with other brushes as well.On the other hand, stencils work fine and as expected.
I'm trying to export all my layouts in a drawings to PDF. I'm using EXPORTPDF from the Output tab.
If I'm exporting the current layout, or if I'm creating a multi-sheet PDF, the plot stamp shows up. I get the 'Save as PDF' dialog box where I can tick "Include plot stamp".
However, if I export all layouts as single-sheet, this dialog doesn't appear and the plot stamp is not on the PDF produced.
I don't have photoshop and all the instructions say to save the transparency directly to pdf in photoshop. Saving to gif, tiff, png and opening as a stamp in acrobat or copy and pasting the transparency from paint.net into acrobat always removes the alpha channel.
View 2 Replies View RelatedIt would be great if gimp could somehow ease the following steps.
1) "select" (stamp from image)
2) "ctrl+c"
3) "ctrl+shift+v" (paste as new image)
4) "ctrl+shift+e" (export)
5) "[filename].jpeg" (alter extension png->jpeg) +"enter" (dialog)
6) +"enter"(export options)
7) + "ctrl+w" (close)
8) +"click on close wo saving"
I wonder if it's not possible to do this in 3 steps:
1) select
2) shortcut export
3) enter filename using predefined (possibly hardcoded) jpeg export options
I saw there's an Export Selection[1] Plugin, but I couldn't get it working with Gimp 2.8 Windows.
[URL] ......
I'm trying to create a custom stamp in Photoshop. Done it with a 16 bits colorspace, saved as TIFF with the required options from the official documentation.
Why do i get a 'grainy' result, even painting with a 100% strength white color ? It happens only on a bump layer. On a diffuse layer, its ok.
Do the bump layer use a 8bits color space ???
when using brushes as "stamps" how do you use normal colors rather than textures?
View 2 Replies View RelatedThis letter can do with paths?How to do it with photoshop cs6?
Photoshop cs6+ windows 7
I need to fix spaicing and I can not locate the menu...
View 12 Replies View RelatedI want to create jpeg file for my website background. It should look like 200 px X 200 px and there will be a letter inside (arial bold, 120 pt). Background of the box will be black (for ex.) and the letter with gradient fill in it should look chrome a like.
View 3 Replies View RelatedI want to make the letter G with 3 arrows. Later give it 3d effect
I somehow can't get it done with the pen tool. I know many of you would make this in a few seconds. How would you go about doing it ??.
I have tried making 3 arrows but they all look weird.
How do I outline a letter or a number? For example, I have a black, arial font, 200 pt number 5. I would like to put a thin outline of another color, say red, around it. I have tried making a larger number 5 on a different layer and placing it under the smaller number but that gives me more of a drop shadow effect which is not what I am looking for.
Here is an example: .....
long time ago i saw this image with a glowing effect on the letters, and i want to make the same effect, but cant figure it how.
its the regular glowing effect that photoshop uses but with two additcional arcs that glows.
This arc as you may see surrounds the letter "O" and then its after the letter "e" on the word "Online" of the following example ....
how can I make something like this image. The letters here are made using a newspaper background. In my case I wanted to use images of my family members to spell the letters.
View 3 Replies View RelatedI was typing some text onto a picture and needed to use a letter from the 'Character Map'. Normally I just 'Drag and Drop', but it would not work on PE. I also tried to get it using the code for the letter and it did not work either, but I am not familiar with using the codes, so maybe I was doing it wrong.
View 3 Replies View RelatedI want to permanently change the center of the letter "P". I have an angle gradient overlay and want to change the location of where the center is. IS this possible and if so how do I do that?
View 2 Replies View RelatedI'm just getting a horizontal line when I try to type a letter in Photoshop CS6. No Brush Presets it seems. I was previously Painting in PS CS6. I use Apple OS X Ver 10.8.
View 2 Replies View Relatedwas a .pdf file. so i opened it in photoshop, and EVER SINCE THEN everything i type in photoshop has been monospaced! there is an unneccessary space between each letter i type!
View 3 Replies View RelatedI have been using Photoshop Elements for quite some time without any problems. Suddenly it appears the feature to change letter types is not responding. The last type I used seems to be stuck and I can not change to any other type. The window with the different letter types flashes up momentarely, but doe not open to be used. Uninstall / install die not solve the problem.
View 6 Replies View RelatedIf you type some text on a curved path is there a way to find out each letters rotation in degrees? Maybe in Illustrator? Any known scripts? Besides individually adding letters then rotation them to the background curved text layer.
View 2 Replies View RelatedHow will I split the image into multiple pages of letter size paper easily. Then I will put it on either PDF or MS Word for print.Then I merge it once it is printed.
View 1 Replies View RelatedThe file naming scheme to add a letter or number to a file name does not work correctly.
Using the Save Image function in CR if I select a File Naming scheme of Document Name = Serrial Letter, I get a file that has a letter 'a' added to the end.
Subsequent saves maintain this 'a' and then add an underscore and an incrementing number. If I select a serial letter then the letter should be the only thing added and it should increment with subsequent saves.
What happens now:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102a_1.jpg
Third Save: IMG8102a_2.jpg
What should happen:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102b.jpg
Third Save: IMG8102c.jpg
Why would I get a number when I asked for a letter?
i am unable to change letterstyles. It appears the style I used last got somehow stuck.
View 2 Replies View RelatedI am using the type tool in Photoshop CS6 (windows XP pro) and I am running into this weird issue. I have never seen anything like it before. It isn't my keyboard or computer, it only happens in Photoshop. When I am typing and I mess up and use backspace to delete a character, the next character I type in gets doubled. Random letters will pop up as well - such as when I type "S", the letter "U" shows up... when I press the spacebar, it adds an extra letter instead of a space (the following letter or previous letter used). The cursor gets placed before that second character too. I can delete it using backspace or delete but then if I press spacebar to continue, it shows up again and again. I can't get rid of the extra characters!
I've tried activating and de-activating various key locks on my keyboard to no avail. Is there some button I pushed or weird formatting I somehow accidently implemented?
adobe photoshop: how do i create cutting lines in adobe photoshop if my document is landscape 8.5 by 11 inches and the image are two side by side 5 by 7 in (so appearing 10 inches wides, 7 inch height)... so basically this leaves a 0.5 border top/bottom/left right...
i need corner crop marks and a little line in the middle top and bottom (in the crop area) to designate where to cut the 10 inches into 2, creating my two 5 by 7 inches for each image... my guidlines are perfectly aligned, i just need to know how to make cut lines out of my guidelines except in the middle
I have a Christmas photo. I wish to have several letters falling from the sky and some forming "Happy Christmas"at the bottom.
I know how to insert letters on to a photo. I wish to change the way the letters fall so they fall at different angles.
I have elements 7.