would like to have Gimp open a specific folder (in my camera's SD card) and display thumbnails of the JPGs in that folder, so that I can click on the one I want to work on and have it open full size.
View 6 RepliesJust changed from Windows XP to Win 8. In XP I could see picture thumbnails in Explorer where as in Win 8 I can only see the Application Icon.
PS: in XP I was using Photoshop CS3 Now I'm using Lightroom 5.2
Corel Connect not showing thumbnails.I have the paid download version of CorelDraw GS X5 installed on a PC running Windows Vista Ultimate 32-bit. I found that the Corel Graphics - Windows Shell Extension only shows in the CorelDraw installer when "Custom" is selected versus "Typical," even though the shell extension shows in Control Panel. The latest twist is that Corel Connect will show photo thumbnails on the hard drive, but will not show thumbnails for photos on a CD or DVD. Other than a different file structure, a DVD or CD is read only. If I copy a photo from a DVD to the C: drive, Corel Connect will show the thumbnail on C:. Windows Explorer shows the thumbnails on the hard drive, CD, or DVD. Corel Connect will not show thumbnails of the Corel .CDR files on the hard drive, CD, or DVD in Vista but it will show them in Win XP.
Why doesn't Corel Connect display .jpg thumbnails on a DVD or CD? I think there is a bug in the Corel Graphics - Windows Shell Extension in Windows Vista.
My BOM displays huge parts views (thumbnails). How do I change it?
View 4 Replies View Relatediin organizer, can't open thumbnails, only look like egg timers, unless I only zoom high and open one at a time?
View 4 Replies View RelatedIs it possible to display captions under the thumbnails in PSE 11 Organizer? If so, how?
View 1 Replies View RelatedSome of the thumbnails do not display a picture in Organizer but only in Editor which makes it very difficult to organize and choose which to work with.
View 3 Replies View RelatedI have just installed Photoshop Elements 11 and the new photos which I have taken are displaying as hourglasses in the organizer. When I click on the photos they display as a photo. How can I get then to display as thumbnails in the organizer. I have windows 7
View 5 Replies View Relatedwhy I can't view jpeg thumbnails in elements 10 organiser???
View 1 Replies View RelatedI was able to drag/drop 1 photo into the canvas but unable to drag anymore into same canvas. I have several layers with 1 photo, border effects, and type. but, cannot drag any additional jpg photos into project.
View 2 Replies View RelatedI have two jpg images in two separate windows. I want to put one of the jpgs onto the other...like layering it over a particular part of the other image. When I attempt to do this the image doesn't show up in the receiving window and disappears from the originating window. I also tried to do a regular copy and paste between open windows and that doesn't work either.
View 5 Replies View RelatedWhen I open bridge CS5 i see my jpegs thumnails for a second, then they all convert to the jpeg icon and I get this message.
"Could not complete your request because a SOFn, DQT, or DHT JPEG marker is missing before a JPEG SOS marker".
I try rebuildign the cache then they all conver to the icon. I have thousands of jpegs. How do I corect this?
They do open in the mac preview, but that is useless for lage folder previews.
I've been trying to get W7-64 to display X5 thumbnails. I've been trying for months. My efforts have brought me to:
Have you tried this?
Have you tried that?
Have you tried Mystic Thumbs?
It's Microsoft's fault
The best I can do is a kluge I don't want to live with. I've been a Corel user for 20 years. Much as I am attached to the program, this makes it virtually unusable. I work with a ton of files. I need to be able to see what they are before opening them.
I'm disappointed to see this problem has been going on for a number of years. It gives me the feeling the good people who built Corel are all gone now, and pride in the product went with them.
I'd love to learn the real honest-to-goodness Corel fix is jist around the corner, but I can't even find an official Corel position on this issue. Is there one? other than
The problem does not exist
The problem is the user's fault
The problem is Microsoft's fault
I have been using PSE 11 for about 6 months with no problems, however, yesterday the prog froze and I had to switch off and re-boot. Now all new uploads are displayed in the organiser as egg timer icons. These will open, but only one at a time when double clicked on. I am on Windows 7. I have uninstalled PSE 11 and re-installed but the problem persists. I have uploaded a very small jpeg and got the same resuilts, which seems to rule out a RAW problem.
View 2 Replies View RelatedLR4 seems to have a bug when importing images from a camera where it randomly does not display a thumbnail of the image before invoking the import process. Usually it is whole blocks of images following a few that are properly shown. Perhaps it is dropping the communication link to the camera early?
Furthermore, once the images are imported, different images are not displayed in the thumbnail panel with filters off.
I have been doing identical import procedures on all previous versions of LR without any similar behavior.
Macbook Pro 10.6.8
LR 4.1
Canon EOS 40D
iPhone 4s
I've been using the FastPictureViewer Codec pack so that DNG and camera RAW files show as thumbnails in Explorer for quite some time. Upon upgrading to LR4, DNG files no longer display as thumbnails, but as the generic Windows icon for an image.
Upon researching the issue, and upgrading the Codecs from the supplier (which still did not fix the issue), the supplier tells me the following:
What we solved [in the update] was a crash with the new files. Adobe did not document their changes, so there is not much we can do except ignore the files. This is what happens when owners of proprietary formats decide to change stuff without notice.
If you turn off the "fast load" and "lossy" options the DNG will still be created following the published 1.3 specification and will work with 3rd party software including ours.
The "new DNGs" are for Adobe private use only at the moment. We don't know (beyond vague promises on employees personal blogs) if they will ever document what they did and publish an updated specification, they are certainly under no obligation to do so. The decision they took not to release updated DNG specs even before LR4 came out was a deliberate one.
While I resolved the problem by turning "fast load" off, I find it highly disturbing that Adobe has made undocumented changes to the DNG format that break 3rd party software. I thought the whole idea of DNG was that it was an OPEN FORMAT and was to prevent situations such as this. At least this is how they sold it to the public and their argument against "proprietary camera manufactuer RAW formats" that could "change at any time".
I just bought a website template and there are certain files that won't open in gimp like psd's and even some png's and jpg's (though the ones I need most do). My girlfriend was able to open the psd's in photoshop. Anyway to get all these files to open in gimp?
I've attached the psd, the png and jpgs wont attach (maybe because they are tiny 70 byte files that dont matter). (Im using Windows 7 64 bit)
When I export a Web JPG from GIMP and it offers me a sliding Quality barthat goes 0 - 100. I want to know if that's an equivalent to the similar JPG quality setting in Photoshop? The reason I'm asking is that my research on Photoshop indicated that JPG output quality settings above 75 were"theoretical." In other words, there might be measurable improvements inJPG quality past 75, but they will be imperceptible by the human eye. If the Quality settings are basically the same in both pieces of software?
View 4 Replies View RelatedI have used Photoshop Elements 3, 5, 7 and 8. In each one I could see the thumbnails of multiple files in the "Folder Location" display in Organiser. Now in PE10 I can only see the thumbnails for one file at a time. Why and how I can display the thumbnails of all files in "folder locations?
View 2 Replies View RelatedI have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
What i say in the title is what i'm doing manually right now for 30 levels!
I'm building different color tshirt previews, every level represents a color and there's a level on top with the draw to be printed.
If I can do it automatically I'll have lot of time saved!
So, I have used Gimp to downsize large architectural drawing images from Tiff's to jpgs. Well, I always thought I was downsizing them. In the past, the process always seemed to make the files more usable in the application where I need to use the architectural drawings without a significant loss in quality.
I will open a tiff in Gimp, save as jpg, export if prompted, then select quality of 40 or 50 percent, and the result is a usable file that is significantly smaller than the source tiff file.Today, the source tiff which is 900 mb in size is being converted to jpg which is 6 or 7 mb in size, totally unusable.
Additionally, if I simply open the source in Gimp, save it to another directory from Gimp without making any changes, the file also grows to 6 or 7 mb. What am I doing wrong this morning that I have not been doing wrong for the last 6 months?
Using version 2.6.11 in Ubuntu 10.10 if that matters.I have a version of 2.7 on my Windows XP OS, and it will lock up trying to open these drawings.
It's curious, because, at 900 MB, I typically can use the drawings without even altering or downsizing them.What I really cannot understand is why Gimp is causing unaltered files to grow in size when saving them.
I have a Fedora 17 distro installed on a couple of different machines. I am unable to open pictures and scans, I have, which are in 'jpeg/jpg' format. I understand the saving/exporting thing, but I am unable to even open them.
I am using Kernel 3.6.6-1.fc17.x86_64 and Gnome 3.4.2. The version of Gimp I am using is 2.8.2-6.fc17.
Why there is no option to see all image thumbnails when open photo like all other software ( hugin, luminance hdr etc) searching photos in gimp is slow and no i dont want use other software searching them it's should be normal like every one computer software
View 1 Replies View RelatedWhy would psd thumbnails all of a sudden start not showing up as thumbnails, just as psd icons?
View 11 Replies View RelatedSo, I new to this site, I I dont know how to display my signature, When i post, I have to attach. Someone tried explaining about a image hosting site, but I didn't quite fully understand?
View 1 Replies View RelatedI am very, very new to Gimp. I watched several Youtube Gimp tutorials, and I noticed that most of of them displayed a Layers, Channels, Paths dialog box on the right side of the screen when dealing with layers, but I have not been able to bring up this dialog box in either Gimp 2.6 or 2.8. How I can display this dialog box?
View 2 Replies View RelatedI cannot bring up Layers, Channels, or Paths. Running Gimp 2.6.10 on a Windows 7 machine. Selecting Windows...Dockable Dialogs...Layers or Channels or Paths does not bring up a new dialog window. Also there is nothing in Windows...Recently Closed Docs
This occurs regardless of image file opened. Not sure how long this has been the situation as I have not been using gimp on the computer where this problem is occurring for a couple months. Am not an advanced user though have used it occasionally for years. All other Selecting Windows...Dockable Dialogs... actions bring up window boxes normally. Tab does toggle display for the Toolbox etc. Just Layers, Channels, or Paths have an issue and I suspect it may have occurred because they were sharing the same window box. I did reset Preferences.
I am able to readily create layers on top of a base image but without the dialog box, only have access to the last one created. Also can merge down the last new layer or flatten the image. My suspicion is gimp may be displaying the dialog box at XY coordinates beyond my monitor screen displayable coordinates. There is a configuration file that saves the last used settings that I can simply delete?
display an image for limited milliseconds?
View 3 Replies View RelatedWhere the output of (display ...) in a script goes when running in batch mode?
View 1 Replies View RelatedHow do I get the dashboards/icons to display at the bottom--they are on the left now? (2012)
View 1 Replies View Related