GIMP :: How To Display Signature
Jun 19, 2011So, I new to this site, I I dont know how to display my signature, When i post, I have to attach. Someone tried explaining about a image hosting site, but I didn't quite fully understand?
View 1 Replies
ADVERTISEMENT
GIMP :: Add Signature Picture
Sep 25, 2012Any way to add signature to the bottom of my posts? I had a look in preferences but can't find way to do it.
I'm also trying to make an animated section to it that has a kinda electrical charge effect, or the flare that runs along a line of lit gunpowder, to the outer edge of the centre section - the bars that hold the name section and the name itself. I've tried a few basic animation techniques but not been able to close to effect I want.
GIMP :: How To Set A Frame On Each Picture With A Signature
Jun 6, 2011I tried searching for this "signature+frame+batch" but did not come up with anything. maybe i using the wrong 'words'
I want to create a frame on each of my pictures and then at the bottom right hand corner have my name.
GIMP :: Moving A Signature On A Print
Mar 26, 2013I have watched another person move a signature from one location to another and then clone the area where he took it from. This was so that I could crop a painting for print to fit a certain size and needed to. It will happen quite a bit for me, as artists sign fairly close to the bottom edge generally.
View 5 Replies View RelatedGIMP :: How To Duplicate Avatar / Signature
Oct 10, 2012How to duplicate their avatar/signature and now I can't find it. It looked like black water with red and yellow flames rising up out of the water. I think the technique used to create the avatar is talked about ofter.
View 3 Replies View RelatedGIMP :: Make Render Pop-out Of Signature Area?
Sep 8, 2006how to make your render "pop-out" of the signature area. It gives a really cool effect and is really simple to do. When we are done, it will look a little like this.
OK, to begin, you need to prepare your render. I am going to use this one.
Feel free to use it if you want to.
Open up a new image with the dimensions of 400 x 125. Now you will need to make a background. I'm not going to give any real steps on how to do this, but if you look around on this site, there are many tutorials showing you how to make them. Try using this one, as it is the way I am going to make mine. Don't add the render to your background though. We will do that later.
Following those steps you will get something like this. If you want to add a border, now is the time to do it. The link to the tutorial I told you about above will also show you how to do this.
You now have both a background and a render. Press Ctrl + A to select everything. Now go to:
Image ---> Canvas Size A window like the screenshot below will appear. If you made the size of your image 400 x 125 like I told you, simply set the settings to the same as shown. If you have used a different size, double the width and height of your image and type what the numbers come to into the boxes names "Width" and "Height". Set the offset X and Y values the same as in the screenshot.
Press "Resize".
Your canvas will now look something a little like this.
This is just how you want it.
Now for your render. Open it up and it will appear in a new window. If its to big, resize it. Now go back to your signature window and make a new layer. Copy your render and paste it on to your new layer. A handy tip to know is when you press F11, it will bring The GIMP into full screen mode allowing you to see what you are doing clearly. You should get something like this. Yours will have little dotted squares all behind it though like the image above. Its OK, its how it should be.
Now add some text or whatever you want on your signature. A cool way to make text look good is to type what you want out on to your signature in white, move it to where you want it to be, set that layer's mode to "Overlay" and then duplicate it untill it looks nice. Heres what I got. Again, squares should still be present.
Now merge all the visible layers by pressing Ctrl + M. Select the first option. Now right click on the layer in the layers window and select "Alpha to Selection". This will select all your signature. Copy it by pressing Ctrl + C. Then go to:
Edit ---> Paste as New
This will open up a new window with your signature in it. Go to:
File ---> Save as . . .
Save it as "Popout Signature.png" it must be in a .png for it to work.
Thats it your all done! This is what I got.
GIMP :: Rotate Image Of A Signature By 20 Degrees?
Apr 22, 2013I'm trying to rotate a imaged of a signature by 20 degrees. After I rotate the image I can't view the whole signature. I have tried to resize the canvas, add transparency.
View 3 Replies View RelatedGIMP :: Orange To Make A Signature Background
Jun 15, 2011Whenever i try to use Gimp the sparks aren't orange they are grey i really need the orange to make a Signature-Background thing for myself i will post a picture
View 1 Replies View RelatedGIMP :: How To Resize Large Image Down To Signature Size
May 2, 2012I've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
GIMP :: How To Display Dialog Box
Jul 21, 2013I am very, very new to Gimp. I watched several Youtube Gimp tutorials, and I noticed that most of of them displayed a Layers, Channels, Paths dialog box on the right side of the screen when dealing with layers, but I have not been able to bring up this dialog box in either Gimp 2.6 or 2.8. How I can display this dialog box?
View 2 Replies View RelatedGIMP :: Display Thumbnails Of The JPGs?
May 10, 2013would like to have Gimp open a specific folder (in my camera's SD card) and display thumbnails of the JPGs in that folder, so that I can click on the one I want to work on and have it open full size.
View 6 Replies View RelatedGIMP :: Layers / Channels / Paths Will Not Display
May 14, 2012I cannot bring up Layers, Channels, or Paths. Running Gimp 2.6.10 on a Windows 7 machine. Selecting Windows...Dockable Dialogs...Layers or Channels or Paths does not bring up a new dialog window. Also there is nothing in Windows...Recently Closed Docs
This occurs regardless of image file opened. Not sure how long this has been the situation as I have not been using gimp on the computer where this problem is occurring for a couple months. Am not an advanced user though have used it occasionally for years. All other Selecting Windows...Dockable Dialogs... actions bring up window boxes normally. Tab does toggle display for the Toolbox etc. Just Layers, Channels, or Paths have an issue and I suspect it may have occurred because they were sharing the same window box. I did reset Preferences.
I am able to readily create layers on top of a base image but without the dialog box, only have access to the last one created. Also can merge down the last new layer or flatten the image. My suspicion is gimp may be displaying the dialog box at XY coordinates beyond my monitor screen displayable coordinates. There is a configuration file that saves the last used settings that I can simply delete?
GIMP :: Display Image For Limited Milliseconds?
Sep 21, 2013display an image for limited milliseconds?
View 3 Replies View RelatedGIMP :: Display Output In Batch Mode
Sep 22, 2012Where the output of (display ...) in a script goes when running in batch mode?
View 1 Replies View RelatedGIMP :: Get Dashboards / Icons To Display At Bottom?
Jul 13, 2012How do I get the dashboards/icons to display at the bottom--they are on the left now? (2012)
View 1 Replies View RelatedGIMP :: Display Color Channels In Grayscale?
Nov 11, 2012Is there a preference in GIMP to display color channels in grayscale? Rather I should ask, has this issue been resolved because I know at one time it was a big difference between PS and the GIMP. And yes, I know that I can decompose and recompose...
View 5 Replies View RelatedGIMP :: Maximize Display Window To Fit The Image - 2.6.11 (2011)
Jul 7, 2011I used to be able to maximize a display window and then make the image fit the window and finally shrink the window to fit the image. This seems to have changed recently. What are the equivalent keystrokes to accomplish fitting the image to the window and then shrinking the window to the image?
View 1 Replies View RelatedGIMP :: Make Page Background Show Display Behind The Image?
Nov 15, 2011While I still try, unsuccessfully, to get Gimp to run on my Mac...
I'm not a graphic artist, but I do have a task I would like to accomplish, so a couple of quick questions?
It's been over 10 years since I experimented with graphics software of any kind other than resize and/or convert from one format to another.
Scenario to illustrate my question:
I create a new graphic, of X by Y proportions. Create a black circle in the center of the graphic. Save graphic.
When I import the graphic into a document, web page, email composition window, etc., I would like only the black circle to display when the background is a color other than white. IOW, I want the unused/blank part of the graphic to be transparent.
I've found the online manual to be confusing to follow, since I can't easily "thumb" through the pages to see a picture of the effect I want to accomplish, and I'm not sure of the correct terminology.
I found a PDF manual for 2.4, are there instructions that cover this? I'm not really interested in printing it, or having it printed. If the manual were for 2.6, I would consider having it printed.
Photoshop :: How To Add Signature
Feb 11, 2009i want to add a layer including my signature or type etc... to hundreds photographes.
i am just dragging layer to next file and and and...
there is a script(export layers to file) in CS3's file menu but i couldnt run it...
Photoshop :: Signature
Feb 25, 2003I was wondering if you had any tips on making a nice signature to sign work with. If you have any recommendations for some beautiful cursive text to use for the signature, that would be great too. I don't have a scanner to scan my own signature to make it into a brush but I would like to make one into a brush. I'd like a nice glowing effect, not too much, just a bit of a shimmer to it.
View 2 Replies View RelatedPhotoshop :: Signature Frame
Jul 13, 2004I came past a signature from someone on another forum and was astounded by it. Especially the framework is done really nice in my opinion.
Now since i'm a forumholic and want to make one of those of my own i was wondering if any of you could give me some tips or a tutoriual where everything is explained step by step.
The sig i'm talking about is this: ....
Photoshop :: ID Badge Signature
Jun 26, 2007how to make a web signature that looks like a simple ID badge. I am trying to create a standard signature for use on the forums that support a faction within an online role playing game i am a member of. The basic image I have in my head is this. A white or maybe grayscale/silverish back ground layer, with the standard techy inlays. a spot in the top left corner for each individual members avatar. Then pushed off to the center-right side, their information, I.E Rank, name, email, member identification number. With a barcode font on the bottom. Finally with the faction logo well cropped and placed to be an underlying layer below the whole thing set at a very low opacity.
View 1 Replies View RelatedPhotoshop :: Animation In A Signature?
Aug 25, 2005i am wanting to make a moving sig. How do i do this? Like for example having lighting flash over the picture.
View 2 Replies View RelatedPhotoshop :: Signature Banner Pic
Mar 2, 2004banner for a sig.
Just "Canis Lupus" with a like wolf eyes in the background, greyish or dark colored?
Just a banner.
Photoshop :: Making A Signature
Feb 7, 2006I want a background that’s black with blue lighting. I also want to be able to make raised looking lettering, and put in 3 objects side by side, and have a 4th one to be transparent behind them.
View 3 Replies View RelatedPhotoshop :: Signature Over A Photo?
Apr 1, 20091. How do i get ny signature on my pc?
2.How do i put my signature over the top of a photo?
Im trying to make an ID, once i place my photo on the layout how do i put my signature across the photo?
I assum i sign my name on a white piece of paper and can it?
If this is correct how do i just get the signature and not the paper where i sign it?
Photoshop :: How To Use A Picture As Signature
Aug 1, 2004want to use a picture that I have made as a signature.
View 2 Replies View RelatedPhotoshop :: Professional Signature Via CS2
Feb 21, 2008I've created my signature (for Lotus use) in Photoshop, in order to get the same pantone as my company's logo. My pblm is now I don't know how could I import my logo in CS2?
View 1 Replies View RelatedPaint.NET :: How To Make Particular Signature
Mar 4, 2011I came across this awesome song with an even better background image. I want to know how to make that particular signature. I know it might have something to do with pyrochild's various distort plugins [i have the pack now] but i'm not quite sure how it's done.
Video in question------->>Background [and song].
Photoshop :: How To Eliminate Signature Block
Nov 19, 2012My signature block with personal info appears when I post a question. How can I eliminate this? This question was sent via email where I erased signature block as a separate step.
View 2 Replies View RelatedPhotoshop :: Signature To Look Like Original One After Printing
Feb 14, 2013I have a signature on a piece of paper which has been done with blue pen. It has been scanned at resolution of 600x600 dpi. I want my signature to look like original one after printing. Is it possible? There is a plenty of tutorials how to do that with normal black pen or how to do transparency etc. I need signature which looks like originals blue pen.
View 8 Replies View Related
