X5 remaining in memory after being closed by pressing the x in the top right-hand corner of the application window?
Opening and closing Draw was giving me several instances running in memory. I had to kill them all using Task manger. It doesn't always happen so I haven't been able to pin down a reason. I'm using version 15.02.661.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.Â
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
I have expanded some artistic text say by 30%. Now I want to expend remaining all artistic text by 30%. How to do it.
View 3 Replies View RelatedMy XP machine is maxed out with 2 gig of chip memory (AMD dual core). Please, no laughing. It does run Photoshop CS 4 at an acceptable speed with 500 meg. PSD pictures. Apparently, there is a way to set up the system drive to dual boot to Windows 7 or XP with a "virtual hard drive" set up. How much less memory does Windows 7 use as compared with XP Home? With the early order half price for 7 Professional, it might be a way to give Photoshop some more memory (5%, 10%, 15%,?%) without having to get a new mother board and new memory chips at a far lower price. I am using Photoshop in a non-work environment. My full time job, hasn't given me a pay raise, in the last 8 years, that matched the increase in health insurance cost, I am willing to accept less than optimal performance boost at an affordable price. And, as I'm paying off a month old Epson 3800, every little bit of savings helps. I am aware that I might/will have to reinstall Photoshop under this set-up.
View 10 Replies View Relatedif you have a large image open (15MB jpg from a digital camera) every time your do something to the image the memory usage for PS jumps by a couple of 100MB. Before long PS it using its max allocated memory (in this case 1GB) and from then on everything you do in photoshop crawls. Worse still, if you close the image (but leave PS open) the memory usage stays where it was and PS still crawls. The only "fix" is to restart PS.I've tried testing this on multiple machines and multiple images but the same thing keeps happening. Is there anyway to get PS to release the memory it's no longer using other than restarting it? Even if I clear the undo history it doesn't release it. This happens even if I just rotate the image a few times.
View 2 Replies View RelatedI keep getting this message come upÂ
"AutoCAD LT is running out of system memory. Continuing the current operation may result in program failure or loss of data. Do you want to cancel the current operation."
After this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies View RelatedI just tarted using Photoshop CCÂ - even without any files open - it was still using 4.5GB of memory! isnt this a "bit" excessive?
Â
i am using Windows 7 Ultimate, with 8GB of RAM.
I use Windows Ultimate 64-bit with 16 gb. My system shows that I have 9 gb of free memory. In Photoshop CC only 3255mb free. Why?
View 1 Replies View RelatedHow does X5 really handle memory? I have 2 GB RAM and with a clean boot I have 1.5 GB physical memory free. But, when I open X5 and a 330 MB CDR file, the remaining physical memory shows 1 GB while it additionally uses 750 MB of VM on the hard disk.
It doesn't sound very clever to me because I wait and watch my hard drive led blinking at 225 BPM : What should I do to force X5 use the available RAM prior to hard disk? (XP x64sp2)
The memory the program is using balloons over time because it does not release memory after you close files. In the course of a day, the memory the program uses gets into the 8-10 GB range (we have very large files such as vehicle wraps and large full color signage). The program will start and occupy under 100mb of memory and then when you open a file it will allocate the memory for that file (say 1 GB). Then when you close that file, the memory isn't released or even re-addressed (it just seems to be in limbo at that point). So after 2 dozen or so files the memory the app is taking up gets into the multi-gigabyte range....even without a single file open (the app is running with no open documents).
Now the system I am running has 12GB of ram, so I am not running out of memory yet, but it is still quite alarming to look and see only 2 GB of ram free on a 12GB system with no open files...
I cannot imagine why the programmers wouldn't have the app release the memory it's using. That seems like really sloppy coding to me. (programming 101: when your app is done with memory, release it.).
The system configuration is as follows:
Core i7 980X 3.33Ghz (6 physical cores with hyperthreading), 12 GB RAM, 4-way RAID-0 SSD HDD array, Windows 7 64-bit, Corel Suite x6 (updated to 6.3).
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
I get the "Out of Memory" error when I'm trying to collect for output, tired re installing but the same erorr continues
View 5 Replies View RelatedI have a large file (17000KB) and it keeps crashing saying it is out of memory. Is there a good way to deal with this file? I can open it and try to delete parts of it but then when I try to save or save it as a different doc, it will crash.
View 14 Replies View Relatedmem-swap.jpg
I noticed these two options in the status bar . what are they... how they work. i dragged into my toolbar and showing that memory allocated and swap space.
From time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
we are using a Dell T5500, WIN7, 64bit with 24 GB main memory. Corel X5 seems to use only a small part of it, although we have large files and jobs (e.g. to export to Adobe Illustrator). This takes a long time (> 10 min), where sometimes Corel even writes nothing to the AI file.
CPU usage is medium, memory usually around 2GB, but not larger.
How can we bring Corel to use more memory to be faster and/or in order to avoid swapping else writing nothing into Adobe Illustrator?
I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
 The instruction at "0x016ae2df" referenced memory at "0x00000006".  The memory could not be "read".
 Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
When I create a new action, apply it and close it, at a latter date I cannot find that action in the Action Panel.
View 1 Replies View Relatedi would like to convert a photo to gray scale but at the same time to remain a color in a specific part of it, let's say a flower.
View 4 Replies View RelatedI just started working with LR, importing photographs from my Nikon D800 folders and storing them on an External USB 3.0 WD 3TB drive (I drive).
Â
I'm using LR4.3 Dell Optiplex 990 Intel Core i7-2600 CPU W 3.4GHz 16.0GB RAM Windows 7 Ultimate SP1, Storage 2TB Hitachi (E drive), 468GB available...
Â
I've told LR to use drive I and I confirm in both LR and in Windows Explorer that that is what it is doing.
Â
When importing, why does LR4.3 continuously tell me I have to delete files on my 'E' drive to "make room" the drive before LR can continue? The importing is being done to the I drive.
What to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
IÂ notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
I'm exporting a Book to PDF in spreads:
Â
[Document A]
[Document B]
Â
Document A ends with an even (left) page. Document B starts with an odd (right) page. I want those two pages to merge into a spread when I export to PDF, which simply doesn't happen. I'm left with two single pages instead. I have tried every option under Book Page Numbering Options. All my pages and spreads are allowed to shuffle. I'm working in InDesign CS6. I've wasted two whole days trying to figure out if this is even doable.
I have been inserting footnotes throughout the story but when I reach a certain point and insert a footnote, it sends the rest of the text into overset.
View 2 Replies View RelatedIs there a way for a label (detail number/sheet number) to rotate with a section tag rather than remaining horizontal?
Is there a way for the same label to flip along the main horizontal reference plane of a section tag?
We do not use the traditional circle head and when the head needs to rotate or flip the 'pointer' lands on top of the label.
I think I have exhausted all combinations of checked/unchecked boxes for 'Keep readable' and such.
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;Â
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
Â
It is taking up large amounts of time and disk space.
I'm using 2007 LT. I Would like to explode a block with the attribute text remaining as text.
View 9 Replies View Relatedwhen I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedI am running x6 on windows 7 64 bit. Recently Corel has started displaying (font not found) next to some of my fonts. When I open Bitsream Navigator it shows that the fonts are installed and in use. I have also checked and made sure that the fronts are installed on the computer itself.
View 5 Replies View Related