AutoCad :: Viewports Line Are Not Shown?
Jan 18, 2012
I have a question regarding viewports. We received drawings from our sub-contractor and we noticed that there is something wrong with their drawing, so I decided to make the modification, but when i opened the file and switched it to layout tab, I was not able to see the line for their respective viewports. But if you are going to double click that drawing, the viewport will be visible.
One more thing is, when i found the viewport and re-scale the things that i want to show inside that viewport, I was confused because in the model tab there are only two drawings which is the plan layout of our project, (the section view and the top view). what they want to show in layout tab is only the topview, so, when i tried to check they used only the top view, yes, but how? because in model tab as what i have said before "THERE'S ONLY 2 DRAWINGS" I am wondering if the make some tricks with this.
View 6 Replies
ADVERTISEMENT
Oct 22, 2013
If I start autocad and draw a line then change its linetype from continuous to Fenceline2 it shows up like it's supposed to, a line with small squares in it. I can also change it's linetype to Fenceline1 and the linetype shows up just fine with the line and small circles in it.
But when I call up some existing autocad drawings that have lines with the Fenceline1 or Fenceline2 linetypes assigned to them, the small boxes or circles are missing from the linetypes. When you type linetype at the command prompt the linetypes are listed in the dialog box, but for some reason they are not showing up right in the existing drawing. When I type linetype, and hit the load button, and browse to my acad.lin file and select it, I get an error message of Bad Definition for linetype Fenceline1 and another for Fenceline2 and another for Batting etc.
So why are these Complex linetypes not working in the Existing drawing but work fine in the just call up autocad empty drawing, and how do I fix them to work in the existing drawing?
View 3 Replies
View Related
Sep 19, 2013
Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
View 2 Replies
View Related
Dec 24, 2011
Everything is on one layout/sheet.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
View 9 Replies
View Related
Apr 10, 2012
I am producing some floor plans which I am having to split into several sheets. I am reusing the overall plan in small scale as a key/location plan (in a seperate viewport).
As the viewport is at small scale I want to make the pens thinner so walls don't come out too thick so I go into the layer manager and change the viewport pen colours and freeze off unwanted layers. Trouble is although I can copy the viewport between sheets and drawings it won't remember the layer settings is there a way that I can either: Set a variable to remember the layer settings within the viewport when copying Write a script to change the layer colours within the viewport and vp freeze the unwanted layers so all the keyplan match between all of my sheets.
The script wouldn't be too much problem for me as I mostly use key commands but when I tried changing the layer colours using -la -> c -> red all the viewports changed not just the current one. Is there a different command to change the viewport colours or is it just not possible from the command line.
View 2 Replies
View Related
Sep 4, 2012
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies
View Related
Aug 23, 2011
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
View 3 Replies
View Related
Oct 21, 2011
The code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...
View 1 Replies
View Related
Jun 28, 2012
In our company we use several datums which come in multiple variants, e.g. Pulkovo, MInna and other West African ones. We frequently need to set up alternative datum shifts to comply with client requirements for exact positioning (Oil & Gas Industry). These are usually Molodensky or Bursa-Wolfe shifts.
I have done a fair amount of experimenting with the datum creation wizards, and within AutoCAD the shifts seem to work correctly, but I am puzzled that when one views the details of the Datum Transformation from the library, the transformation parameters are not shown as part of the WKT string. Also, presumeably consequently, when data from a drawing with a coordinate system based on this shift is exported to ESRI shapefile format, the transforamtion parametere are not shown in the .prj file.
I do not know whether I have missed a stage in the creation process, or if this this is a bug. It also seems odd that when viewing the details of a user-defined datum, there is no obvious clue as to what the transformation parameters are for that datum, other than finding a transformation with the same code name.
View 3 Replies
View Related
Oct 30, 2013
I am trying to cut sections using Inventor I will begin by saying I am a fairly new user. On numerous occasions I am running into an issue where the section cuts are not shown correctly? I have attached an image showing an example of what I am talking about, you can clearly see that there are bolts and plates that should be displayed in the section cut which is shown above.
View 6 Replies
View Related
Oct 21, 2013
I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
View 2 Replies
View Related
Oct 24, 2011
how to create the dimension shown in an idw?
View 9 Replies
View Related
Dec 21, 2013
I created a miscellaneous alignment and everything came out exactly how I wanted it to show. But I do not see this alignment in my prospector tab. I see the other centerline alignments, but when I click on Miscellaneous Alignments I do not see my alignment. It does not even have a plus box to expand. I have saved my drawing a couple times and still nothing.
I even changed it from miscellaneous to offset just to see if that had any relation to the issue, but it still does not come up in the prospector tab.
View 3 Replies
View Related
Feb 8, 2012
Simply, I have Xrefs showing up in my Drawing correctly, but they are not listed in my Xref Manager. ?
If it makes a difference, I did move the Host Job Folder into an Archive. So normally my XRef links are broken but still they show up in my Xref Manager and not in the Drawing until I re-path to the new location. This is because I didn't use Relative Paths, which I am starting to use now.
View 9 Replies
View Related
Dec 14, 2013
I have a drawing done by a colleague. The problem is the blocks not shown in multi view.... I checked the layers and isolation but i cant find the solution.
View 4 Replies
View Related
Dec 2, 2011
When I quick dimension my objects it is shown in inches, I want it shown in feet according to scale, 1/8"=1',1/4"=1' etc.
View 9 Replies
View Related
May 1, 2009
dashed lines are showing as continuous in both model and paperspace the property tab shows the linetype as by layer when i click on the line and under the layers proper manager the linetype for the layer says dashed
View 9 Replies
View Related
Oct 25, 2013
This problem has just started to occur and frankly, I'm totally stuck. When I created 3d objects to represents conduits runs in a building, they worked fine. However, when I saved and reopened my file, the objects are shown in different locations, yet their snap points (endpoints, midpoints, arcs, etc) are shown in the correct location. I have attached an image showing what I mean to clarify. I am using Autocad 2014 and Civil 3D 2014.
View 1 Replies
View Related
Feb 27, 2013
I am having trouble exporting to a PDF to use in an InDesign document. If exports fine, but it looks AWFUL and doesn't show my annotations or notes clearly at all. it's all blurred.
View 2 Replies
View Related
Apr 16, 2013
I'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies
View Related
Oct 24, 2012
I use a single IDW template for all my drawings. In it, I've got multiple dim styles.... One is Inch, one is mm, and one shows alternate units as Inch (mm).
In my titleblock, I've got a box that says "Units: " and I've currently got this setup as a prompted entry so that I'll have to think about it when I start the drawing and manually enter "Inches" or "mm" or "Inch (mm)".
Is there a way to automate this so I don't have to manually enter it, or remember to change it if the units change down the line?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 3 Replies
View Related
Aug 4, 2012
I use INV 2013. MOVE THE END OF THE PART DOWN TO SEE WHATS HAPPENING. (MOVED TO REDUCE THE FILE SIZE). I am trying to split the solid using the surface as shown.
But, I am unable to do so. Also, I need to create a new surface with 0.50mm offset to create female form die.How to do it.
View 3 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Oct 13, 2011
how to change the precision display in my properties window; I usually keep it open and docked, and am in the habit of changing many of the properties of a selected item there.
When I pick a drawing feature, the properties window's precision is only set to single digits (ie: highlight text, the text size in the window is displayed as "0" instead of "0.8").
View 1 Replies
View Related
Jan 10, 2014
I am currently using the visual style "Wireframe" and cannot seem to figure out why my lines won't plot out as dashed lines even though they are dashed in my layout. I have been playing around with my LTSCALE,PSLTSCALE but nothing seems to be working.
Current Visual Style Setting (WireFrame):
Edge Settings: Facet Edges
Occluded Edges: Yes
Linetypeashed
Intersection:Yes
Silhouette Edges:Yes
View 9 Replies
View Related
Jun 12, 2011
I have another question: My lineweights are shown in model space but not in layout. When I print/plot the line weights are missing.
How do I show the line weights in layout so it prints right?
I am using AutoCAD 2011 for Mac.
View 1 Replies
View Related
Aug 19, 2013
I'm using AutoCAD 2013 for Mac, and it works perfectly fine and normal. However, everything I draw, weather its a line, a shape or different objects crossing each other, will have some kind of tag next to it, telling what kind of corner or intersection it is. It's very informative, but they are simply too larger on my display, I hardly get to see what I'm drawing. So frankly I'd love to know how to remove them.
View 3 Replies
View Related
Sep 28, 2011
I have a problem in plotting. In layout, the whole drawing and text were shown, but in my output (printed drawing) the texts are incomplete.
09272011(001).jpg
View 9 Replies
View Related
Jan 25, 2012
The pulldown menus listed in the CUI are File, Edit, View, Insert, Format, Window, and Help. The menu bar has one pulldown menu: Express. How do I make the pulldown menus listed in the CUI appear on the menu bar? Sure wish it was as easy and obvious as "drag them there".
View 5 Replies
View Related
Jan 11, 2013
How do I make the dimension shown black instead of pink? I had to suppress the fillet from the drawing in order to grab the edge to get the true dimension then when i unsuppressed the fillet the dimensions turned pink. I also used a section view but that did not fix my problem either.
View 9 Replies
View Related
May 6, 2013
Had an electrical storm and there was a power surge the moment I was saving my completed drawing. Yes, it was perfect timing and yes, I have a power backup. Now titleblock is shown in model space and completed drawings are only shown when scrolling over layout tabs. When I click on the layout tabs only the titleblock shows up. Is there anyway of retrieving the drawings to send back to model space or get them to appear in the layout tabs when shown on the full screen? Are those layout tabs just showing what the drawings used to look like and there is no way of getting to them back?
View 3 Replies
View Related
