union the red and yellow objects? after that in mine I have intersection line between them! why?and the other question is; when I try Interfere command to remove the interference object it doesn't work!
View 6 RepliesWhenever I try to union two solid objects, there is a line between the two objects even after they are in union. How can I avoid the line?
View 6 Replies View RelatedI have created an object and unioned it with another object of what i assumed was the same length.
These nasty lines appeared and as i zoomed in an unwanted face appeared.
I have tried solid edit and delete face but it says gap cannot be filled. There is another unwanted face i am assuming on the other side but the gap is so small my computer always freezes and slows down before i can get in that close to examine it.
the perspective viewport suddenly turns to a red ground with yellow objects. when I zoom in/out, the graphics return to normal, but only momentarily. this is not occurring in the other viewports. is this a video card issue or should I redownload and reinstall the software? my video card is ATI Mobility Radeon HD 4670.
View 6 Replies View RelatedI'm working in Adobe CC Illustrator on a MacBook Pro.When I click on an obect or text it is bounded by yellow. The background of my page is white. Yellow on white is irritating and hard to differentiate. I tried modifying my preferences, but nothing changes.
Change that highlight color to blue, red, purple.... anything but yellow? I need to delete preferences?
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedI have a base(blue) with an array(orange) positioned on a face.
When I select all & UNION the whole geometry becomes orange & I would like it to become blue.Selecting the base first then the array doesn't seem to work.
I was wondering if you have to solid objects and then use UNION command to make them as ONE object BUT then I don´t after a while you realise that this was a mistake is there a command that you can use to split them as they were before (beside from command undo or slice).
View 5 Replies View RelatedRecently have had AutoCAD re installed and and am having trouble unioning and subtracting the two solids in the attached file. Other objects will occasionally subtract and union with these objects, but only occasionally.
View 4 Replies View RelatedAny source of 3D files for SMS hygienic fittings (Swedish Standard Union)? URL....
View 2 Replies View RelatedI am trying to create a company logo and would like the text of the first word to be rendered as a union flag and the second word as the Sierra Leone flag, ie a bold font with just the fill showing the flag.
I have tried putting a flag behind text and trimming so it only shows through the text but not only does trim not work, I cant seem to get a transparent fill for the text anyway. Ive seen an example of transparent text but no instructions as to how to do it.
I want to make a UNION of a 3D object and 3D Text, but Union Command doesn't work!
PS- Attachment includes dwg file
I'm trying to do a union overlay with 2 topologies and am getting an error message that says, "intersections detected, can't create topology".
View 5 Replies View RelatedI would like to do an array polar for 4 items and union with the command "union" all of them automatically.. how can i do that in a lisp ?
View 9 Replies View RelatedI've tried using the union tool in AutoCAD 2013 as well as the Boolean join function in Inventor Fusion 2013. In AutoCAD it doesn't let me select more than one object (says that the array is the only object and that individual unit blocks are duplicates). In Inventor Fusion I can't seem to get the hand of selecting the target & tool bodies.
View 1 Replies View RelatedFAIL-UNION-3D-Polyline based wedge.dwg...An unusual bug here, and a workaround of sorts. This one is fairly serious and results from attempting a union of a solid with another solid, when one of the solids is created entirely from 3D polylines and is not on a CCS planar axis.
I'll attach the same file twice - once with a bug ( 3D polyline solid ) and once without the bug ( Solid has been modified to include one "normal" polyline face.
In the middle, a wedge connects the two. Basically, I needed to increase the angle between them by 15 degrees, so slice, polyline around faces and LOFT. Pretty simple and straight forward. The result was that any attempt of a union with the wedge in the middle results in a failure due to inconsistent faces, and the deletion of the non-polyline solid.
This results in damage to the file, and the operation must be backed out or reloaded.If the middle solid includes ONE normal polyline face, with a repositioned CCS on the face, then no problem. This is a workaround, but only sometimes, however if fixes the problem for both the polyline face and the 3D polyline face.
I've encountered this problem a few times, but it was this project that made it possible to capture it cleanly and understand what was happening. It's a critical bug, but only affects parts made from 3D polylines and LOFT operation, so it's more likely to affect complicated designs.
To see problem, take 3D polyline file and use SOLID UNION on the three ( or middle and one side ) pieces and you'll get an error and part deletion. Try again with the "workaround" file, and you'll see that it works both sides now.
The file with this post is the "broken" one - the middle wedge is a single 3D solid created with LOFT and 3D Polylines.
When I am trying to make any shapes on my computer...even just a closed triangle with the LINE TOOL...when I come back tot he starting point to close the triangle, the dot neer turns green. Not even if I am directly on top of it. Is there some setting that got changed accidentally, that is causing this?
It works on my computer at work, just not my laptop. Others I know have the same laptop and recieved the same install...and it works for them.
We just upgraded Inventor from 2013 to 2014.
I opened a model generated in previous releases and noticed that there were parts with a strange yellow highlight.
Turns out the parts aren't explicitly highlighted, it's just that their edges are yellow. See the screenshot below.
I usually work in the 'Shaded with Edges' view style. I found that if the view style is changed to 'Shaded' or 'Realistic', the yellow disappears with the edges.
The only parts the yellow edges seem to affect are ones generated as surfaces. I would like to know how to turn the yellow off is possible. So far I've tried changing the part appearance in the toolbar and changing the surface body properties in the model tree; neither method worked.
Now I don't model in surfaces, but there have been purchased parts imported into Inventor that have in the past ended up as surfaces, and it's these parts that have the highlight. I haven't noticed anything like this in previous releases.
How to turn off the yellow flags. See the attachment photo. I click on them and the whole assembly is lit.
View 4 Replies View RelatedI have no clue what I messed with but when I draw a line or any object, no matter what layer I have it set on, it will display as yellow instead of "by layer".
View 2 Replies View RelatedI'm trying to change all the texts to my table to yellow.Match Cell command didn't work.
How Can I do that?
How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View RelatedImmediately after closing AutoCAD Architecture 2012 or AutoCAD MEP 2012 a yellow warning triangle with a black exclamation point displays. This happens every time AutoCAD is closed. However it is isolated to a few systems all of which were installed using the same deployment as the other systems that do not display this warning. AutoCAD performs as expected but displays this warning when closed.
View 9 Replies View RelatedWhy cells appear in yellow in my part list ? (see attach file)
View 4 Replies View RelatedI am working on drawings in which some of the text is in yellow which is great on a black background. After printing the yellow becomes very hard to see on white paper. I know I know I could change the color of the layer before plotting but I was hoping for a seamless way of doing it. Is there a way to display colors in yellow and plot in blue similar to white/black?
View 2 Replies View Related~ I want to purge the color yellow from autocad. ~
Is it possible to override all the colors of an existing *.DWG to a Monochrome Format? I want to be able to open any autocad file and veiw everything in black and white IN MODEL SPACE.
I am not interested in 'changing layer colors' or 'manually changing blocks to the right color.' Right now, I explode the entire drawing (several times depending on how deep something is grouped) and change the color to by layer, but sometimes blocks become contaminated and lose all their data. (In addition, I am not interested in plotting in Monochrome.)
If this task is impossible, is it possible to change the definition of the color "yellow." What I mean by the previous statement is to trick autocad into thinking it is using 'yellow' when it is actually using a different color. Sort of like an induced color blindness.
SUMMARY: I don't want to change a color FROM yellow, I just don't want yellow TO EXIST.
It appears when I create a pipe network by layout...
View 7 Replies View RelatedI just started a new job a couple weeks ago where they use AutoCAD (I have been using Microstation v8 for the last few years). I completed a drawing and printed it in black & white. Everything looks great except the yellow lines. I want them to print black instead of light gray.
View 8 Replies View RelatedHow do I hatch alternate colours between black and yellow? Like a barracade
View 4 Replies View RelatedAfter "copyclip" command -no matter you use ctrl+c or type into the command line- color of all lines inside "Layer 0" with By Layer color property change to White. Other layers and color remains the same. If I change color property of "Layer 0" form "By Layer" to a specific color such as red, yellow they are also remain the same.
I am using Autocad 2009 64 bit.
When I perform a feature on inventor, some yellow lines appear. How can I delete them, or change the view in order to hide them?
View 9 Replies View Related