AutoCad 3D :: UNION Text And Object In 2012?
Jun 14, 2012I want to make a UNION of a 3D object and 3D Text, but Union Command doesn't work!
PS- Attachment includes dwg file
ADVERTISEMENT
AutoCad :: Text Rendering As Union Flag
Mar 4, 2013I am trying to create a company logo and would like the text of the first word to be rendered as a union flag and the second word as the Sierra Leone flag, ie a bold font with just the fill showing the flag.
I have tried putting a flag behind text and trimming so it only shows through the text but not only does trim not work, I cant seem to get a transparent fill for the text anyway. Ive seen an example of transparent text but no instructions as to how to do it.
AutoCAD 2013 :: 3D Union Array
Jul 22, 2013I have a base(blue) with an array(orange) positioned on a face.
When I select all & UNION the whole geometry becomes orange & I would like it to become blue.Selecting the base first then the array doesn't seem to work.
AutoCad :: Union Red And Yellow Objects?
Nov 15, 2007union the red and yellow objects? after that in mine I have intersection line between them! why?and the other question is; when I try Interfere command to remove the interference object it doesn't work!
View 6 Replies View RelatedAutoCad 3D :: Opposite To Union Command?
Jan 21, 2012I was wondering if you have to solid objects and then use UNION command to make them as ONE object BUT then I don´t after a while you realise that this was a mistake is there a command that you can use to split them as they were before (beside from command undo or slice).
View 5 Replies View RelatedAutoCad 3D :: Union Or Subtract Two Solids?
Aug 22, 2011Recently have had AutoCAD re installed and and am having trouble unioning and subtracting the two solids in the attached file. Other objects will occasionally subtract and union with these objects, but only occasionally.
View 4 Replies View RelatedAutoCAD Inventor :: SMS Swedish Standard Union
Jul 5, 2013Any source of 3D files for SMS hygienic fittings (Swedish Standard Union)? URL....
View 2 Replies View RelatedAutoCad 3D :: Line Between Two Solid Objects After Union
Dec 5, 2012Whenever I try to union two solid objects, there is a line between the two objects even after they are in union. How can I avoid the line?
View 6 Replies View RelatedAutoCad :: Selecting Object In The 2012?
May 14, 2013I created two lines.
Before this problem appears, if I select one line then another line one-by-one, they are all selected.
But now, when I select one line then another line one-by-one, only last one is highlighted as selected (dashed line, two blue endpoints, and one blue middlepoint), the other one is not.
How do I switch back to the previous one?
AutoCad 3D :: Tiny Faces Appear Through Union Of 2 Presumably Same Length Objects
Aug 3, 2012I have created an object and unioned it with another object of what i assumed was the same length.
These nasty lines appeared and as i zoomed in an unwanted face appeared.
I have tried solid edit and delete face but it says gap cannot be filled. There is another unwanted face i am assuming on the other side but the gap is so small my computer always freezes and slows down before i can get in that close to examine it.
AutoCAD Map 3D :: Getting Error Message When Doing Union Overlay With 2 Topologies
Oct 5, 2005I'm trying to do a union overlay with 2 topologies and am getting an error message that says, "intersections detected, can't create topology".
View 5 Replies View RelatedAutoCAD VB :: Create Object For 2011 / 2012?
Jul 19, 2011i'm using the following code (generic) to interface with AutoCAD; not including the version because my company upgrades every year...
Private AutoCAD_Instance As Object
AutoCAD_Instance = CreateObject("AutoCAD.Application")
When I try to run this, I get an error 'Unable To Create ActiveX Component'...
AutoCAD LT :: 2012 - Not Highlighting Object Before Select It
Jul 28, 2011how or why objects aren't being highlighted BEFORE you select them?
In 2011 I was able to (say preview the object) highlight the object before selecting it.
I noticed this when I have a few lines on top of each other and couldn't 'toggle' through to bring the correct line to the front.
Also occurs when hatching by Object, object doesn't highlight.its just a variable I can change.
AutoCad :: Can't Paste Any Object In Drawing / 2012
Apr 12, 2012I can't paste any object only in one drawing
View 9 Replies View RelatedAutoCAD Civil 3D :: Object Enabler Won't Install For 2012
Nov 9, 2012I've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running, it comes up and says it can't find any install of Civil 3D 2012..
Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".
AutoCAD 2010 :: 2012 Fitting Object To Area?
Aug 23, 2013I've just got AutoCAD 2012 and mkaing some rings, I needed to fit the same textures of a ring of 8mm in a 6mm ring. My problem is that the inside diameter is larger in the 6mm ring, and that's why I can't use the Scale command. Is there a command that allows me to fit all the objects in this area??
Here is the file with both of the rings.
AutoCAD 2010 :: 2012 Object Enablers - One Missing?
Sep 8, 2012I notice that there is no "AutoCAD Architecture & AutoCAD MEP 2011 Update 1 Object Enabler" for ACAD 2012 on Autodesk's website.
Why is that? Did I miss something?
AutoCAD Civil 3D :: 2012 Object Enablers For Microstain V8i-SS2
Nov 2, 2012We have the very unfortunate need to use microstation for one of municipal clients and would like to find out how to enable the AEC objects in Microstation so when we attach a dwg I dont get squares everywhere.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Union Items After An Array Polar
Mar 12, 2012I would like to do an array polar for 4 items and union with the command "union" all of them automatically.. how can i do that in a lisp ?
View 9 Replies View RelatedAutoCAD 2013 :: Union Array / Can't Seem To Get Hand Of Selecting Target And Tool Bodies
Aug 24, 2012I've tried using the union tool in AutoCAD 2013 as well as the Boolean join function in Inventor Fusion 2013. In AutoCAD it doesn't let me select more than one object (says that the array is the only object and that individual unit blocks are duplicates). In Inventor Fusion I can't seem to get the hand of selecting the target & tool bodies.
View 1 Replies View Related3ds Max :: Object ID Pass In 2012
Dec 15, 2011I really intrigued to getting the Object ID pass in 3ds Max working properly, for EXR workflow.What i want to do is to add a object ID Pass to give me a RGB pass of my objects according to my G-Buffer ID number and object information.
Example ID 1 = red material (R). but for a wired reason I keep getting different colours assigned to my specified objects. URL....
CorelCAD :: UNION Fails With Solids Made Entirely From 3D Polylines
Sep 26, 2013FAIL-UNION-3D-Polyline based wedge.dwg...An unusual bug here, and a workaround of sorts. This one is fairly serious and results from attempting a union of a solid with another solid, when one of the solids is created entirely from 3D polylines and is not on a CCS planar axis.
I'll attach the same file twice - once with a bug ( 3D polyline solid ) and once without the bug ( Solid has been modified to include one "normal" polyline face.
In the middle, a wedge connects the two. Basically, I needed to increase the angle between them by 15 degrees, so slice, polyline around faces and LOFT. Pretty simple and straight forward. The result was that any attempt of a union with the wedge in the middle results in a failure due to inconsistent faces, and the deletion of the non-polyline solid.
This results in damage to the file, and the operation must be backed out or reloaded.If the middle solid includes ONE normal polyline face, with a repositioned CCS on the face, then no problem. This is a workaround, but only sometimes, however if fixes the problem for both the polyline face and the 3D polyline face.
I've encountered this problem a few times, but it was this project that made it possible to capture it cleanly and understand what was happening. It's a critical bug, but only affects parts made from 3D polylines and LOFT operation, so it's more likely to affect complicated designs.
To see problem, take 3D polyline file and use SOLID UNION on the three ( or middle and one side ) pieces and you'll get an error and part deletion. Try again with the "workaround" file, and you'll see that it works both sides now.
The file with this post is the "broken" one - the middle wedge is a single 3D solid created with LOFT and 3D Polylines.
Maya :: 2012 - Object RenderView Not Found
May 6, 2011// Error: setParent: Object 'renderView' not found. //
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Rotate Text And Object Without Rotating Text
Aug 29, 2011I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
3ds Max :: Studio 2012 - Orbit Tool On Selected Object
Apr 21, 2011Is it me or is the viewport-orb tool changed?When I select an object (in perspective mode, not otho) - and press Z to zoom-extend the chosen object, I can rotate around it, but when performing a second "orb"-around, the "zoom-locked-extends" is gone and he orb-rotates around the SCENE and not the chosen object anymore?
what gives?... (same principle when in sub-object mode - 1st orb-rotate around the chosen object is good. When going out of orb-rotate and orbing around to the other side of the object or whatever, the "zoom-extends-region" is "scenafied" as in scene-a-fied bug or new feature? if new feature, how the hell to turn it off.
3ds Max :: 2012 / Select Object Marquee Not Displaying Correctly
May 24, 2011When I use select object, it never displays the marquee correctly. One of two things will happen.
It will
1. Not even display the marquee at all e.g. I use select object by rectangular selection and the rectangle marquee box is invisible (although I can still select things)
or
2. If the marquee does display it shows it behind the objects, instead of in front of them, as scene in the image below.
AutoCAD LT :: 2012 Text Invisible In Viewports
May 7, 2013I'm running AutoCAD LT 2012. The text in my drawing becomes invisible when I'm in the layouts. (The text associated with leaders is still visible). These drawings are not complicated, but the scale I'm using is 1"=200', so they are large. Everything in the drawing is on Layer 0. There are no X-refs. When I switch back to the model tab, all the text is there.
View 5 Replies View RelatedAutoCAD VB :: 2012 And VBA Text Not Appearing In Textbox
Apr 4, 2012AutoCAD 2012 is loaded on my office machine with WIndows 7 64 bit. I have downloaded the correct vba module and installed. After writing a simple program with two texboxes for user input and a calculation button with an answer box, when running the cursor appears in the textbox but neither textbox will accept input from the keyboard and the cursor does not move nor does the tab key work even with it set in the program. Pressing the calculate button and a zero appears. In the toolbox I have added the AcFocusCtrl control, still no luck.
View 6 Replies View RelatedAutoCAD 2010 :: Text Is Missing After Installing 2012?
Mar 20, 2012We just installed AutoCAD 2012 on a machine that was running 2006. (32 bit on Windows XP Pro).
We opened a file that was created in 2006 and the Text is missing from the file. I tried to create a new file and when I start typing text, nothing happens.
I installed the service pack update and hot fix and still doesn't work. I've tried re-booting and nothing happens. I tried to go in and migrate the tools from 2006 but it was already done.
note, that this has also been installed on another computer and everything worked fine.
AutoCAD Map 3D :: Text Plotting Outside Viewport In 2013 But Not In 2012?
Oct 3, 2012I am currently running map 3d 2012 and my co-worker is running 2013. When she plots in paperspace, there is text that gets plotted that is outside of her viewport. When I open up the drawing on my computer, it plots perfectly. I attached a clip of it, the thick black is our drawing border, the viewport is where the color stops.
View 1 Replies View RelatedAutoCAD Civil 3D :: 2012 - Text Style Changing
Feb 11, 2013I am using Civil 3D 2012 and seem to have a reoccurring problem with the text styles changing. At the start of the day, I will open my drawing and find that my text style has changed and I am not sure what is causing this. I check my text styles and none of my settings has change nor has the text style. Nothing seems to fix the problem other than running a repair of the system.
View 4 Replies View Related