As a part of a 3D Cad course I am doing I have to use the slice command to obtain a section view of my model . Wblock is then used to copy to file and then oops used to get full model back. I have to produce numerous views including 3 of these sections in paperspace .Where and how do I xattach these section views . I have tried a few different ways without success.
View 0 Replies
I am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedI am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedSo, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedI am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedHow to insert xrefs with other ucs than world. The host drawing ucs must be in world. The different x-refs are made with different ucs according to local coordinates.
In the host drawing, the xrefs must be placed correctly according to global coordinate (world). (The xrefs are all surveys of different spaces all with marked fix points according to the physical global coordinates.)
Is it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
how to create a section view for a pond other than quick view.
View 2 Replies View RelatedIs it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View RelatedI have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedI'm trying to insert a new instance of a X-Ref already present on the drawing. If i use Database.AttachXref(path, name) I receive "ref NAME has already been defined. Using existing definition." on the command bar. I've tried to retrieve the ObjectId of the X-Ref definition from the X-Ref name, but my code don't work. Where is the error?
Here's my
Private Sub AttachXRef(path As String, name As String)
Dim Doc As Document = Application.DocumentManager.MdiActiveDocument
Dim Db As Database = Doc.Database Dim pPtRes As PromptPointResult
Dim pPtOpts As PromptPointOptions = New PromptPointOptions("")
[Code] ...
I am trying to insert an xref into a dwg file and can not find how to do this. In AutoCADD you can insert an xref that is linked to the file so that when a change is made to the attached file the xref also updates. I am trying to do this in Inventor and have not been able to figure out how to do so.
View 9 Replies View RelatedIt's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedI place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
I’m having a user profile issue on one computer. I have a user, using windows 7 and AutoCAD Civil 3D 2014 on his work station. When using Civil 3D he has two issues: one, he cannot import Dgn’s. I’ve tried everything it just won’t work. Second, he cannot xref or insert PDF’s into a drawing. Now the reason why I say this is a profile issue is because if I log on to his computer (or anyone else log’s on his computer), I can do all those things in Civil 3D, import DGN’s & insert/xref PDF’s. If this user log’s on my computer, he can do all those things in Civil 3D. Import DGN’s & insert/xref PDF’s. Something with his profile on his computer is corrupt and I’m trying to fix it without deleting and creating another user profile.
View 5 Replies View RelatedI can't seem to find the SYSVAR that controls insert to 0,0,0 instead of pick on screen..
Quad Core 2.3GHz Intel, 64-Bit, Win 7
16GB Ram, 2GB Graphics Card
256GB SSD
I have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies View RelatedI'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies View RelatedHow can I insert area Details in civil 3d cross section?
View 1 Replies View RelatedHow does it work? I see in the properties after I high lite it. Annotative Scale no/yes. We xref one drawing into other drawing and the view scale changes. will my hatch look the same or will the smaller view scale look really big in the drawing.
View 1 Replies View RelatedI'm a document controller that is trying to ID the situation with 2600 drawings. Some files are so large - 250,000kb, they won't open. They have bound xref's in them. We want to ask the contractor to unbind them and attach them as normal xref's. I need to view if a drawing has bound xref's. I just want to see them as BLOCKS which I now understand they are. How do I do view the blocks that were once xref's?
View 9 Replies View RelatedI am simply xref'ing a profile drawing into a sheet drawing to print out. AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to. It almost looks as if the PL linetype generation is off for this line.
View 1 Replies View Related
