When I select any visual style other than '2D Wireframe' in AutoCad 2011 for mac it stops me from being able to edit it at all, not even select any objects.
I trialed AutoCad 2012 and it allowed me to edit solids whilst they were shaded. Is this a feature difference, a bug, or something that I haven't set up right in 2011?
I am trying to do some minor animation with a shaded solid model. I have tried mslide and a script... this make s very jerky, flashing animation.
I tried a lisp routine to move the object in small increments, again the motion is very flashy and slow, as it appears to struggle perhaps with the shading.
I noticed doing a move command, and moving the same object manually, dragging the object around the screen with a mouse makes for pretty smooth motion. Way better than what I was doing.... Is there a way to do this programatically?
Civil 3D 2013, trying to edit a FG profile through the Profile Entities vista and Profile Layout Parameters dialog box. All entities in the vista are shaded (locked) and will not allow me to edit. Is there something that I am missing here? I should be able to edit the PVIs (or entities) correct? I couldn't find anything in documentation as to why these are shaded and not allowing me to edit them.
View 5 Replies View Relatedi am trying to edit the arrow? When i click on it, it shows as a solid under properties. I need to resize that arrow, Just dunno how to do it?
View 9 Replies View RelatedIs it possible, via VB, to modify solidbodies color ?
Actually, I need to modify part color. But in some cases, the part color and the solidbody color are not the same. So I need to modify the Solidbody color, to match the part color.
I found the bodies in ComponentDefinition.SurfaceBodies, but I can't find something like ComponentDefinition.SurfaceBodies.Item(1).color.
i would like to use 3d dwg files from the 50 wood joint library for cnc processing. Therefore i load a dwg file (like attached) into account and want to start editing the wireframe, but thats not possible. Furthermore I expected to be capable of producing a solid for further processing in a CAM software.
How can I edit and make the attached geometry a solid?
How to start menu Edit Base Solid in Inventor 2013?
When i choose Edit Solid in Inventor . start Inventor Fusion
I have a solid body but I need to make a part of it removable. I want to be able to lift it off and put it back on. The problem is that at the moment it is all one piece. So what I need to know how to do is remove just this one face from my solid, turn it into a seperate part so that I can create a lip on the solid for it to set on once it is reasymboled.
View 4 Replies View RelatedCommands Work features is not active in edit base solid.
How to make plane? How to make active ?
When I pan around a drawing by holding down the scroll wheel of the mouse button, I sometimes pan quite slowly, AutoCAD decides to zoom to extents. I know I have not double clicked the scroll wheel.
View 3 Replies View Relatedis it possible to Zoom and Pan whilst I have a title box open.I work for a company that has installed its own toolbar and and attribute box's to be filled out. My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific area.If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time.
how to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
is it possible to Zoom and Pan whilst I have a title box open.
I work for a company that has installed its own toolbar and and attribute box's to be filled out.
My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific are.
If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time that would be great.
I am attempting to extrude cut an object which passes through another but I wish for the cut to ignore the other geometry and only cut the other. I have attached the model. I do not wish the cut to cut throuh the curved surface and only through the vertical pieces seen. Is there an option to cut and ignore certain solid bodies in the process? This is not an assembly btw.
View 6 Replies View RelatedI am working on Autocad 2012, and am having a problem drawing on faces under another face, whilst working on 3d objects. I have the view set to 2d wireframe, and can select objects underneath whilst not drawing/modifying anything, however as soon as i try to draw it just selects the uppermost face to draw on.
Is there a button to allow me to snap to different layers whilst drawing?
Why, when I edit a sketch in context of another assembly do sketches of other parts suddenly become visible?.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
Having only recently started using Autocad 2012 (I mainly used various versions of LT over the last 10+ years) I have noticed a few strange goings on.
It doesn't happen all the time but sometimes whilst in a command ("move" for example), when I go to click on an object or pull a window, a separate, totally random command activates itself. Why this happens, I just hit escape a couple of times & continue what I was doing.
I'm not sure if it is a case of me, in my haste, missing my intended object & hitting the right click button (which I use as a return & not a drop down menu).
If you hold down F4 to orbit in 3D (equally press the Orbit button under view on the ribbon) you can temporarily set the orbit pivot position by left clicking the mouse. I have a 3D mouse (3dconnexion spaceball 5000) installed on my workstation so can perform the same view manipulations without technically having to enable the orbit command. But I can't change the pivot position unless I activate the orbit command and then left click - making the main advantage of a 3D mouse for me a bit of a nonsense..
Any command/key combination that allows me to setup a custom button to set the orbit pivot position?
know whether one can enable 'ortho' whilst specifying points using 'WIPEOUT' command?
View 5 Replies View RelatedWe have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
How do I export and import preferences? I need to trash them often because PS is crashing when I try and print. Suport only gave me this instruction and couldn;t figure out a solution - just trash my prefs.
View 1 Replies View RelatedWe had a crash whilst entering CFX of a clip. Unable to open the project, Smoke continues crashing. Creating new Project does not work, Smoke crashes when trying to access the other one's library.
It crashes on trying to create the thumbnail for the timeline, I suppose. The CFX that caused the mess is the first clip.
In the meantime we recreated everything from scratch, luckily not a big deal. But I'd not like to enter this situation with clients. And they are expected to attend a session next week. I suggest to add a real LIST VIEW in the browser. Without those small thumbnails.
Truly there was some messy setup in the CFX.
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedI want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View Related
