I relatively new at this 3D stuff however I've produced a model in 3D & need to add both realistic sky & sea but don't know how. I managed to add sky as a background but can't get the sea to work. Also I need to add the image of a solar panel onto a solid but can't get it to work either.
View 5 Replies
Which is the best way to do a solar panel?
View 9 Replies View RelatedI am looking for a lisp or vba to calculate solar panel angel / solar light power on any place in the world found 1 that shows sun time on 1 day of the year.
And can the autocad menu's SUNPROPERTIES / GEOGRAPHICLOCATION be controlled by lisp or vba ?
I can place a solar panel on the roof, but cannot do anything with it. When I try to tilt it from upright, it turns yellow and says "cannot rotate" . Been stuck on this problem for a week now, and am quite frustrated as you can imagine. Have tried every trick that I and others have suggested to no effect. Seems to be constrained to one of my vertical reference lines. Reference line is listed as the "host", but it's greyed out, so I can't change it. Tried to disassociate from reference line, but can't.
Went in to "family" and noticed that there's and extrusion underneath the panel (invisible when placing the panel). Don't know what it's there for, or if this has anything to do with it. I can't delete or modify it.
I've also tried to create my own solar panel, but can't figure out how to save it as "my own" family.
I simply want to tilt the panel back about 35 degrees. I've tried to tilt it in all different views. Sometimes I can get it to tilt along the wrong axis, never on the one I want it to. Is there any way I can create my own panel with a sketch program, import it into Revit, and save it as a component?
Does Revit Architecture/M&E/Structures 2013 have a standard solar panel family?
View 3 Replies View RelatedI'm a cartographer not a 3D modeler! However, I've been tasked with creating a simple animation of a two-axis solar PV panel as it tracks the sun across the sky during a single day.
I've got everything modeled but don't understand how to constrain and establish the motion relationships - IK chains, rigging and such. See attached image for my needs. I believe I have the rotation pivot points established.
I can place a solar panel on the surface of the roof (flush with roof surface), but cannot tilt it up. No matter what I try, an error message comes up saying "can't rotate element into this position".Have tried creating new panel, renaming it, etc. The panel seems to have a constraint of some sort that I cannot override.
View 9 Replies View RelatedI am in the process of designing a clear label for my aftershave and would like to have the text on a solid color panel be transparent so that the liquid is visible. I would also like to have an outline (Line) tracing the font. I've been doing some internet searches for "punched out" and "cutout" text and the like but this process is using two solid color layers.
As it stands now, I have a transparent background, the panel as one layer, and the text as another layer on top of the panel.
I came across a process for Illustrator but was hoping that it could be done in Photoshop as well since I have everything already setup in PS. I did try the method described for Illustrator but I couldn't get it to work in PS...not throwing out the high percentage of operator error on this one.
I am into tracking solar array's. So designing for high winds is paramount. I wonder if Inventor will have a package for analysis of wind loads. It is a different kind of FEA. Call it a 3-D distributed load.
View 5 Replies View Relatedhow to use Civil 3D to create a grading plan for a solar PV site or a golf course?
Here is the situation. We have a large 100 acre site that is not flat. We want to do minimal grading to "smooth out the surface". So that maximum slope on the site is 10%. The site does not have to be graded completely flat. We are trying to work with the existing contours and terrain as much as possible.
Is there some functiion or some way for Civil 3D to "smooth out a surface"? We want to work with the existing slopes and contours of the site and just need a grading plan that will smooth out mounds, holes, or high slope areas.
I'm using C3D 2013 on a 64 bit windows 7 machine. I have basejump loaded, and when I first installed it there would be a "Raster" tab in the ribbon that would allow me to resample, etc. That tab is now gone. How to get it back?
I used to click on a point to select it and a new tab would show up in the ribbon to list points, edit points, etc. That doesn't come up anymore either.
Here are two ones I have created (comments welcome) but I was looking at some on deviantart and getting some idears I wanted to know how to do a few things: -Milkyway (Whole Galaxy)SunShadows (Like in Startrek voyager intro where the sun light hits the ship and casts a shadow)Spaceship (just wanted to know how people put these in to there pictures.
View 1 Replies View RelatedFor one of the students first projects I would want them to make a solar system. Of course there would be spheres representing planets with pivot points in the center of the system (the sun) and some would revolve slower and some faster around the sun. Now I was able to create the planets and set the pivot points in the center (the sun) and have them rotate but I'm trying to take this a step further. I really want to create moons that would circle the planets.
That's where my problems starts. I have a planet that I want a moon to revolve around. I was able to change the moons pivot point to the center of the planet but the pivot point remains there while the planet circles the sun. What I need to do is have the moons pivot point locked onto the planet that way if the planet moves, then the moon moves along with it. In this case, the moon will be rotating around the planet as the planet rotates around the sun.
Is there a "simple" way to convert a 2d immage (photoshop file) to a 3d solid?
Basically I have a 2D image (a discus of sorts) that has geometrical shapes "cut out of it" (Imagine a circle with a triangle "missing" inside) and I'd like to create a evenly high discus with a triangle hole in it).. Let's say a coin that misses a triangle in it's mid.
Clearly I could draw a circle (surface) extrude it, then create a triangle (surface) and extrude that one and subtract one from the other, but since the image I have is a bit more complex I just wanted to know if there is a quicker/easier way.
Also I have a text in my discus, and drawing a text surface in AutoCAD is not really easy.
I want to know all about solar radiation analysis in revit 2013. any tutorial link? I have tried it on my design but it only opens sun path. and there is no "add ins" option.
View 5 Replies View RelatedI need to attach some image to curved solid. Its no problem to attach image to flat surface. But how to do it on curved?
View 9 Replies View RelatedNeed to attach a image to a solid 3d surface for rendering but every attempt fail.
View 5 Replies View RelatedI have a set of scanned drawings that they wanted marked up via AutoCAD to use for submittals. I made a nice check mark for all the "good" dimensions using a solid green hatch (which plots as green).
I brought the scanned drawings in as xref TIFFs and put my autocad objects over them. Problem is that when I go to PDF them, the check marks are transparent and I really don't want them to be. I've never messed with any transparency settings in our CAD and I've only noticed this issue when printing over top of images.
This is in Carlson 2014 BTW.
I'm having difficulty in reducing solar glare on a tree (poor camera). Here is the part of the picture I'm working on. What method do I use?
View 2 Replies View RelatedIs there a way to overlay a transparent background png image on a solid or mesh that already has a material assigned? i.e. a chrome object with a decal applied. I have tried creating a new material using my png file as the image but have not been able to overlay it on an object where I want to see the material underneath.
View 1 Replies View RelatedI need to create a background for a piece... but it cant look cartoony or anything, and I dont want any planets. I just want really cool looking stars.
View 9 Replies View RelatedIs it possible to enter a custom number of frames in a solar study so the length of the overall animation can be lengthened and the quality of the animation improved?
View 3 Replies View RelatedWe have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View Related
