Here are two ones I have created (comments welcome) but I was looking at some on deviantart and getting some idears I wanted to know how to do a few things: -Milkyway (Whole Galaxy)SunShadows (Like in Startrek voyager intro where the sun light hits the ship and casts a shadow)Spaceship (just wanted to know how people put these in to there pictures.
View 1 RepliesFor one of the students first projects I would want them to make a solar system. Of course there would be spheres representing planets with pivot points in the center of the system (the sun) and some would revolve slower and some faster around the sun. Now I was able to create the planets and set the pivot points in the center (the sun) and have them rotate but I'm trying to take this a step further. I really want to create moons that would circle the planets.
That's where my problems starts. I have a planet that I want a moon to revolve around. I was able to change the moons pivot point to the center of the planet but the pivot point remains there while the planet circles the sun. What I need to do is have the moons pivot point locked onto the planet that way if the planet moves, then the moon moves along with it. In this case, the moon will be rotating around the planet as the planet rotates around the sun.
I need to create a background for a piece... but it cant look cartoony or anything, and I dont want any planets. I just want really cool looking stars.
View 9 Replies View RelatedI'm having difficulty in reducing solar glare on a tree (poor camera). Here is the part of the picture I'm working on. What method do I use?
View 2 Replies View RelatedI have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedWhich is the best way to do a solar panel?
View 9 Replies View RelatedI want to know all about solar radiation analysis in revit 2013. any tutorial link? I have tried it on my design but it only opens sun path. and there is no "add ins" option.
View 5 Replies View RelatedI can place a solar panel on the roof, but cannot do anything with it. When I try to tilt it from upright, it turns yellow and says "cannot rotate" .  Been stuck on this problem for a week now, and am quite frustrated as you can imagine.  Have tried every trick that I and others have suggested to no effect. Seems to be constrained to one of my vertical reference lines. Reference line is listed as the "host", but it's greyed out, so I can't change it. Tried to disassociate from reference line, but can't.
Â
Went in to "family" and noticed that there's and extrusion underneath the panel (invisible when placing the panel). Don't know what it's there for, or if this has anything to do with it. I can't delete or modify it.
Â
I've also tried to create my own solar panel, but can't figure out how to save it as "my own" family.Â
Â
I simply want to tilt the panel back about 35 degrees. I've tried to tilt it in all different views. Sometimes I can get it to tilt along the wrong axis, never on the one I want it to. Is there any way I can create my own panel with a sketch program, import it into Revit, and save it as a component?
I relatively new at this 3D stuff however I've produced a model in 3D & need to add both realistic sky & sea but don't know how. I managed to add sky as a background but can't get the sea to work. Also I need to add the image of a solar panel onto a solid but can't get it to work either.
View 5 Replies View RelatedDoes Revit Architecture/M&E/Structures 2013Â have a standard solar panel family?
View 3 Replies View RelatedI'm a cartographer not a 3D modeler! However, I've been tasked with creating a simple animation of a two-axis solar PV panel as it tracks the sun across the sky during a single day.Â
Â
I've got everything modeled but don't understand how to constrain and establish the motion relationships - IK chains, rigging and such. See attached image for my needs. I believe I have the rotation pivot points established.
I am into tracking solar array's. So designing for high winds is paramount. I wonder if Inventor will have a package for analysis of wind loads. It is a different kind of FEA. Call it a 3-D distributed load.
View 5 Replies View RelatedI can place a solar panel on the surface of the roof (flush with roof surface), but cannot tilt it up. No matter what I try, an error message comes up saying "can't rotate element into this position".Have tried creating new panel, renaming it, etc.  The panel seems to have a constraint of some sort that I cannot override.
View 9 Replies View RelatedI am looking for a lisp or vba to calculate solar panel angel / solar light power on any place in the world found 1 that shows sun time on 1 day of the year.
And can the autocad menu's SUNPROPERTIES / GEOGRAPHICLOCATION be controlled by lisp or vba ?
Is it possible to enter a custom number of frames in a solar study so the length of the overall animation can be lengthened and the quality of the animation improved?
View 3 Replies View Relatedhow to use Civil 3D to create a grading plan for a solar PV site or a golf course?
Here is the situation. We have a large 100 acre site that is not flat. We want to do minimal grading to "smooth out the surface". So that maximum slope on the site is 10%. The site does not have to be graded completely flat. We are trying to work with the existing contours and terrain as much as possible.
Is there some functiion or some way for Civil 3D to "smooth out a surface"? We want to work with the existing slopes and contours of the site and just need a grading plan that will smooth out mounds, holes, or high slope areas.
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedI want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS  Coordinate not other objects.
will photoshop 5.0 run on a 64 bit system?
View 4 Replies View RelatedMy system info of pse 7 tells me that the operating system is vista while I'm working with windows 7. It also shows a place for the catalogfile that don't exists on my computer.
View 2 Replies View RelatedMY OLD PC BROKEÂ IM TRYING TO DOWNLOAD PHOTOSHOP CS5 TO MY NEW SYSTEM FROM OLD HARD DRIVE CAN I TRANSFER THE INFO TO MY NEW SYSTEM SOMEHOW
View 1 Replies View RelatedMy mac says it has Photoshop install but when i look for it i cant find it, i reinstall but it says its already install i dont know what to do??
View 2 Replies View RelatedI have a 32 bit PC that I recently upgraded. I put in the most amount of RAM memory I could and upgraded the system from XP to Windows 7 Ultimate.Yesterday I upgraded from Photoshop CS2 to CS5 and have suddenly been having problems with the system locking up on me in the middle of a project.
Also, when first using the program I could not figure out how to get the HISTORY window to open. That is a function ALWAYS USE!!It should ALWAYS open automatically I now have it working properly, but when opening the program for the first time the HISTORY window should ALWAYS BE THERE and ready to use
I have given up hope on getting cs4 to work on my old computer (multiprocessor server board) but what about cs3? My system seems to meet the minimum requirements but I had no luck running cs4 and cs3 is not functioning properly. Can someone take a look at these specs and tell me if this system should run cs3? I know it is an old system but I have not had any problems with it since it was new and do not plan on getting rid of it any time soon.
Tyan Tiger MP (2460) AMD-760 MP Motherboard
2 X Athlon MP 1800+
2 gigs Kingston DDR registered EEC memory
ATI Radeon 9550 256 MB DDR memory, with updated drivers (openGL Support)
Windows Vista Ultimate
I have a 1.73 GHz Processor and the sytem requirments is 2.0 GHz Processor. Does this matter?
View 3 Replies View Relatedif I am able to re-install PS CS3 Extended after a system restore?
View 6 Replies View RelatedWhen I use the Lasso, Polygonal Lasso and/or Magnetic Lasso Tools, my system shuts down.
This didn't always happen and the only recent change to my system was downloading/installing Adobe Reader 8 (update). To the best of my knowledge, prior to this update the all the Lasso Tools worked fine.
I searched the help section and the only information I found related to my problem was to set Adobe's 'Post Script" printer as default. I tried that and it did not help. Please note, prior to this problem, my Canon was set as my default printer and every thing worked fine then.
Should I uninstall Adobe Reader?
I'm using: Photoshop CS2
My system: Windows XP Home Edition
RAM is: 256 MB
Free Space: 60.2GB
Printer: Canon 7800 Series
I have WEB standard and Design Standard and cannot get the programs to open.Is it because they are installed on a 64 bit system?Are there some patches or downloads that could help?
View 9 Replies View RelatedI realize that Adobe calls for a G5 or Intel processor-equipped computer to run CS4. Sometimes these requirements are not completely rigid or necessary. if a 1.25Ghz eMac with 4 GB RAM, 32 MB of VRAM will run CS4,
View 7 Replies View RelatedI have recently purchased Lightroom v2, but not yet installed it. Before doing so I wanted to check that my PC is capable of running it. 'Minimum' requirement is for a Pentium 4 procesor, which I do not have, though I meet all other requirements. Does any one foresee problem with running Lightroom with this processor. Intel core 2 Duo CPU T5600 @1.83GHz or would I be wasting my time.
My OS is Vista for business.
I would like to work with raw files and correct some around 4-500 pcs once and then batch to export to jpeg and I need a very good system for that I think. Thanks a lot for any advice! And perheabs you recommand me a system for Premiere too...maybe the same system designed for Photoshop works even in Premiere CS3 or 4 good or very good?
View 11 Replies View Related