I am looking for a lisp or vba to calculate solar panel angel / solar light power on any place in the world found 1 that shows sun time on 1 day of the year.
And can the autocad menu's SUNPROPERTIES / GEOGRAPHICLOCATION be controlled by lisp or vba ?
i've got a lisp-routine that calulates multiple area's and put the sum in text in the drawing on the place i select.
the sum has to be devided with 1000000 so that it is in m2.
the lisp-routie i use is:
(defun c:ca(/ pt ent txthgt)
;;; bepalen van de teksthoogte indien current style height = 0
(setq txthgt (cdr (assoc 40 (tblsearch "STYLE" (getvar "TEXTSTYLE")))))
[Code]......
I prepared a lisp code that needs high precision calculation:
(defun Time2Frac ( h m s hsec)(+ (/ h 24.0) (/ m 1440.0) (/ s 86400.0) (/ hsec 8640000.0)))
test:
(Time2Frac 23 59 59 99)
it returns 1.0 but the real result is 0.9999998842592
so, how can I change the precision of AutoCAD for some calculation?
I am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
Which is the best way to do a solar panel?
View 9 Replies View RelatedI relatively new at this 3D stuff however I've produced a model in 3D & need to add both realistic sky & sea but don't know how. I managed to add sky as a background but can't get the sea to work. Also I need to add the image of a solar panel onto a solid but can't get it to work either.
View 5 Replies View RelatedIs there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedI can place a solar panel on the roof, but cannot do anything with it. When I try to tilt it from upright, it turns yellow and says "cannot rotate" . Been stuck on this problem for a week now, and am quite frustrated as you can imagine. Have tried every trick that I and others have suggested to no effect. Seems to be constrained to one of my vertical reference lines. Reference line is listed as the "host", but it's greyed out, so I can't change it. Tried to disassociate from reference line, but can't.
Went in to "family" and noticed that there's and extrusion underneath the panel (invisible when placing the panel). Don't know what it's there for, or if this has anything to do with it. I can't delete or modify it.
I've also tried to create my own solar panel, but can't figure out how to save it as "my own" family.
I simply want to tilt the panel back about 35 degrees. I've tried to tilt it in all different views. Sometimes I can get it to tilt along the wrong axis, never on the one I want it to. Is there any way I can create my own panel with a sketch program, import it into Revit, and save it as a component?
Does Revit Architecture/M&E/Structures 2013 have a standard solar panel family?
View 3 Replies View RelatedI'm a cartographer not a 3D modeler! However, I've been tasked with creating a simple animation of a two-axis solar PV panel as it tracks the sun across the sky during a single day.
I've got everything modeled but don't understand how to constrain and establish the motion relationships - IK chains, rigging and such. See attached image for my needs. I believe I have the rotation pivot points established.
I can place a solar panel on the surface of the roof (flush with roof surface), but cannot tilt it up. No matter what I try, an error message comes up saying "can't rotate element into this position".Have tried creating new panel, renaming it, etc. The panel seems to have a constraint of some sort that I cannot override.
View 9 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies View RelatedIs there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this
(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies View RelatedI am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
The following gives me the first folder string, with no back-slashes, that the drawing exists in.
(setq FirstFolder
((lambda (/ tmpDir tmpPos)
(substr
(setq tmpDir (getvar "dwgprefix"))
(+ 2 (setq tmpPos (vl-string-search "\" tmpDir)))
(- (vl-string-search "\" tmpDir (1+ tmpPos)) (1+ tmpPos))))))
Is there a way to find the name of the second folder?
Is there a way to find the name of the third folder?
The string length of the characters for each of the first, second, third (and so on) folders are different, which means I can't count character using the "substr" function.