AutoCad 2D :: Show Endpoints While Drawing
Nov 15, 2011If there's a way to make endpoints visible on selected lines / polylines while drawing new lines/polylines or running other routines.
View 9 Replies
ADVERTISEMENT
AutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?
Sep 14, 2011The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedAutoCAD VB :: How To Delete One Of Endpoints With VBA
Jun 17, 2012when I comand to draw the polyline like: 0,0 -> 10,0 -> 10,15 -> c
I can get the property of closed is True
but if I type : 0,0 -> 10,0 -> 10,15 ->0,0
I get the of closed is False becase 1st point and last point are overlaped.
so how to delete one of endpoints with VBA?
AutoCad 2D :: Create B-spline Which Has Two Endpoints?
Feb 20, 2013I know there is a Spline command in the AutoCAD.
Can I create a B-spline which has two endpoints and two control points in AutoCAD similar as the one in the Solidworks?
AutoCAD Civil 3D :: Missing Band Data At Endpoints
May 27, 2013I've been working with Civil 3D for a while and I've gotten the Profile View and Data Bands down.Whenever we create an alignment with only two vertices (at each endpoint) and make the Northings, Eastings, and Elevations show in the data bands, the start and end show no data. (As below) Now I'm sure the data band is set up correctly because if I add a vertex somewhere along the alignment, all the missing data shows up.
View 3 Replies View RelatedAutoCAD 2010 :: Checking Endpoints For Connectivity Prior To PEDIT
Jul 5, 2012I have a .DWF underlay that I am tracing over an aerial. I need to create hatches for several areas, and tried to PEDIT the lines and arcs into a polyline. Several segments, however, were not "connected" to the adjacent segments even though I'd meticulously snapped to endpoints to draw the lines.
Is there a command or LISP routine to check for connectivity before I attempt PEDIT so I can fix the gaps first?
AutoCAD 2013 :: Intersect Two Endpoints Of A Line With Two Adjacent Lines
Apr 19, 2013The green line is parallel with the blue line. I want to move the green line upwards until its endpoints intersect with the two red lines.
View 9 Replies View RelatedAutoCad :: Show Measurements In A Drawing?
Nov 23, 2011I have drawn an elevation view of kitchen cabinets. I now want to label the width of each cabinet.
View 2 Replies View RelatedAutoCAD 2013 :: Blocks Will Not Show Up In Drawing
Oct 11, 2013I am trying to copy and paste a bar scale from one drawing into another at 0,0…. But it won’t show-up, as you can see from the attached there are 17 blocks in this drawing but none of them will show-up, I have even tried to re-insert the block but still no joy….. I have re-started AutoCAD, even the computer but still nothing…….
View 3 Replies View RelatedAutoCAD Civil 3D :: No Object Show In Drawing?
Aug 22, 2013so i have a file that when i zoom extents i can not see or select anything by window but when i use the command erase all is says there are 42 objects in the file but i cant find them
rename attached file ext to dwg
AutoCAD Civil 3D :: Pipes Will Not Show Up In Drawing
Apr 25, 2013When I try to make a pipe network the structures are visible but the pipes are not present. I thawed all layers with no success. This is a recent development because It was working last week.
View 2 Replies View RelatedAutoCAD 2010 :: Drawing Won't Show Dimensions
Mar 28, 2013I have an existing facility drawing that I'm trying to edit and when I try to dimension something it disappears after I click enter for the final time. I've tried to explode the drawing numerous times, save it in different formats, and copy and paste it to a new drawing. Nothing seems to work. How can I get the dimensions to show up?
View 9 Replies View RelatedAutoCad 2D :: Length Does Not Show Up During Drawing A Line
Nov 3, 2012I use Cad2013 . During a line command , I can not see the length beside the courser , so I have enter the length using keyboard and it is very time consuming .
I do not remember if I changed any default settings but It used to work properly .
Win 7-32 bit - cad2013 full version - no plugins - No viruses .
AutoCAD Inventor :: Show Which Drawing Section Is On?
Oct 24, 2011I have a drawing where I am cutting a section on one sheet and them moving it to another sheet. Is there a way to get the section mark/callout to state on which sheet the section resides?
For example instead of the section just stating "A" it would say "A/3" or "A/Sheet 3" or something like that?
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
Photoshop :: Joining Lines In Illustrator, Not Through Endpoints
Mar 11, 2005Is there a way to join two lines through anchor points and not endpoints? Simple example would be to create a 'T' object by joining two lines.
View 2 Replies View RelatedIllustrator :: To Join You Must Select Two Open Endpoints
Mar 26, 2009 kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.
Illustrator :: CS6 - Line Tool Endpoints Not Connecting
Apr 21, 2013I have been using the line tool rather frequently as of late and have found it to be quite useful. More to the point, midway through lining over something my lines stopped showing endpoints to snap to when I wished to place another, resulting in some rather unpleasantly rough shapes. My question is: what did I press / change to do this, and how can I go about un-doing it?
View 4 Replies View RelatedAutoCAD 2013 :: Linetypes Show Up In Different Scales In The Same Drawing
Oct 20, 2013I am trying to understand how Linetype scale works, and have been researching on LTSCALE, MSLTSCLAE and PSLTSCLAE. I believe I have a fair understanding of each of these settings. Still, I can't figure out how the scaling works while I was trying to create custom line type. To illustrate, I created a new linetype called XCENTER, which is exactly the same line type as CENTER except its name, in a new LIN file.
*XCENTER,XCenter ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
After loading the new linetype into my drawing, I was surprised to see that CENTER and XCenter show up in different scales in the same drawing (see png).
My work file is WORK.DWG, I have purged everything except the two polylines, one with the line type of CENTER, the other xCENTER. Not that my global scale is 1:100, LTSCLAE=, MSLTSCALE=1, the object scales are both set to 1.0.
I copied the two lines to clipboard and pasted on a brand new drawing TEST.DWG, and the two lines show up in the same scale.
What in my original drawing WORK.DWG is causing this problem?
AutoCAD .NET :: Select Entities In Drawing And Show Grips
Jun 11, 2013I have a command which proccess entities in the drawing and creates a SelectionSet. But, on the drawing i do not see the selected objects . I need to show grips on selected objects . It is a looks like a Quick Select command. What can i do? What method showing the grips?
View 2 Replies View RelatedAutoCAD Inventor :: Show Some Of Hidden Lines In A Drawing?
Oct 1, 2013I want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
AutoCAD Map 3D :: Linking Up A Receiver To Show Position On A Drawing?
May 4, 2012i wish to set up a mobile reciever device that can integrate with an autocad dwg drawing to show my physical location in the real world as a point on the drawing screen in real time.
I guess you would say it would work exactly the same way a GPS map works however instead of using the GPS and street map i would be substituting in a construction site base station and autocad drawing.
p.s the "Leica" system will not do the job for me. from my search so far it mainly works with elevations rather than lateral positioning in real time. i do not want to have to constantly move emitters and or receivers on the worksite in order to track my movements in real time and display them on the cad drawing i have in front of me!
AutoCAD Inventor :: Drawing Doesn't Show All Workpoints
Feb 27, 2012This doesn't work:
oPartDocument.ComponentDefinition.WorkPoints.Item(2)
All I have is one item. (Center Point)
AutoCAD Inventor :: Show Associated BOM Quantities On Balloons In Drawing?
Jan 3, 2012How do you show associated BOM quantities on balloons in the drawing?
View 7 Replies View RelatedAutoCAD Inventor :: Show Virtual Sharps In Drawing?
Jul 17, 2012I thought I had virtual sharps figured out but I guess not. I can dimension to the virtual sharps point but the wittness lines are not showing up. Thus it appears that the dimension is to something off in space. Where do I find the setting to show the wittness lines and select the style of lines? As I wrote this I thought of "styles editor" but I didn't fijnd anything there either.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: In A Drawing - Table Members Don't Show
Nov 18, 2013I made a table in the file and also split the part into 2 solids.
In the drawing, when i choose the first table mamber it shows both. when i choose to show the active member it shows the first member only (as i want).It didn't happen before i split the part.
My zip program doesn't know to include only the subfolder with the generated table files, only the whole path. i hope you will manage to generate the files, if not-i will add them with the whole path
AutoCAD Inventor :: Draft Angles - How To Show In 3D Drawing
Dec 16, 2011I'm currently working on a Spa design and using new tools which is all new to me. I've used Draft Angles before but on a spa where you sit normally the sit reclines back.
Now I'm not sure how to do / show this in a 3D drawing. I've read and serached for different things but have yet to find something similar I'm looking for.
I've attached a PDF along with the circled area as to what I'm trying to accoomplish. Wanna be able to show the dip etc via Inventor.
AutoCAD 2010 :: How To Show Calculated Area In The Drawing
Nov 7, 2012Is there any command that the calculated area may appear on the drawing?
or
How can i calculate several small areas in one command only?
AutoCAD 2010 :: How To Show Set Of Particular Layers (of Same Drawing) In Each Layout
Apr 24, 2012How to show a set of particular layers in each layout?
I’m wondering if there is a way to turn off particular layers in a layout without affecting other layouts.
For example, in the screenshots below, if I need to show only “1_walls” layer in the layout “p_04” but to keep all other layers turned on in other lay outs, then how can perform this?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad :: Trying To Show Only Portion Of Drawing In Layout To Print
Feb 2, 2014How to get only part of the drawing to show up to print. I've drawn a floor plan and have copied it several times. I have also drawn several patterns that represent a few different floor tile layouts and then put them over each floor plan and after some trimming I have a variety of options that someone can choose from for floor tile layout. I'd like to show each one on a separate sheet and of course when I go to layout the whole drawing comes over and how to only show one floor plan at a time.
View 4 Replies View RelatedIllustrator :: How To Connect Multiple Endpoints Into One Straight Line
Aug 12, 2012I made a silhouette of buildings and I"m wanting to connect the bottom open endpoints into one straight line. The reason I'm doing this is because I want to add a fill to the silhouette as a whole instead of doing them one by one.
I tried joining paths but it can only be two open endpoints at a time. I have many open endpoints.
The pen tool only joins two open endpoints. If I try to continue to try to add another endpoint to the same line, the pen tool becomes a "minus anchor point" tool and messes up the shape of the buildings.
Of course, I thought of just making each building separate and grouping them together. However, if I do that, a issue occurs because I have certain buildings that are "in front" of each other (not in the sense of layers, but the image as a whole). I purposely made the sihlouette look like some buildlings are in front of each other and some are behind each other.
Illustrator :: Connect Selected Endpoints Tool Is Greyed Out
Jun 16, 2012I was going for something like this
[URL]
So I built this
[URL]
The endpoints indicated here will not connect - the connect selected endpoints tool is greyed out