AutoCad :: Trying To Show Only Portion Of Drawing In Layout To Print
Feb 2, 2014
How to get only part of the drawing to show up to print. I've drawn a floor plan and have copied it several times. I have also drawn several patterns that represent a few different floor tile layouts and then put them over each floor plan and after some trimming I have a variety of options that someone can choose from for floor tile layout. I'd like to show each one on a separate sheet and of course when I go to layout the whole drawing comes over and how to only show one floor plan at a time.
View 4 Replies
ADVERTISEMENT
Apr 24, 2012
How to show a set of particular layers in each layout?
I’m wondering if there is a way to turn off particular layers in a layout without affecting other layouts.
For example, in the screenshots below, if I need to show only “1_walls” layer in the layout “p_04” but to keep all other layers turned on in other lay outs, then how can perform this?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
May 22, 2011
how to set out a drawing to a Layout from model space?
View 7 Replies
View Related
May 25, 2011
Scale in Layout. I drew my drawing in mm , and I want to use Layout to print it like I saw in a video, but how do I scale my drawing? For example, the counter and shelf I drew is 1:1 in the Model workspace(1600 by 2000mm) but in Layout, for printing on to an A3 sized paper how do I get it to print in 1:40 or something of that sort?
Right now I'm printing by using Fit To Paper with the dimensions included, but I notice our contractors are using 1:30, 1:40 etc. , my boss doesn't mind since I include the dimensions but I reckon it might cause problems in the future.
And is it possible to just select anything in my selection window, even 3/4 of a line? Because right now, I can only select the whole line no matter what, I only want 1/2 of it because I want to cut the whole drawing in half and move it apart.
By the way, is it possible to customize the panel? Instead of switching between tabs constantly, can I make my own panel? I googled this and tried using CUI but it is confusing. I just want certain sections grouped into 1 bar. Like... Draw/Modify/Attach/Windows all on the first panel.
I really want to be able to type in certain commands without hitting Enter, is that possible? If I hit M, it will move the object without me hitting Enter. Can that be done? Maybe not M, maybe Alt+1 to move, Alt+2 to Scale etc. etc.
View 6 Replies
View Related
Jun 19, 2013
I want to print multiple drawing in a single layout (see picture) . It is possible in autocad to setup printing once? For example: One project contains 100 A3 drawing, one layout contains 20 A3 drawing. Up to now, i print to pdf separately, and i combined the 100 pdf in one file.
And i print from this file. (only in this way succeed to print collating multiple copies). But if the project changes, I could start all over again. Is there a solution to publish an combining the sheets to print immediately?
View 9 Replies
View Related
Apr 5, 2012
My issue is this: While trying to print or pdf a drawing in (lets say 8.5x11) layout view, the edges get cut off. It looks as though the template I copied is too large to be printed in full. If this were the case, wouldn't it be the same even if I tried printing in extents? It still does the same thing printing in extents.
I am using Mechanical 2012.
View 9 Replies
View Related
Oct 8, 2013
why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies
View Related
Apr 17, 2013
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
View 1 Replies
View Related
Dec 9, 2012
I am using autocad 2010 in layout have more than one drawings when i give plot from layout and after 2nd drawing give plot from same layout that time the previous plot portion not shown as shaded. in autocad 2008 previous plot portion shown shaded in layout.
View 2 Replies
View Related
Nov 11, 2012
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
View 2 Replies
View Related
Oct 14, 2012
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
View 3 Replies
View Related
Jun 13, 2012
I have a template with layouts of different sizes that had been working fine with a previous Xerox 6204. My D size and E size automatically oriented with the 36" side parallel to the roll feed. I have since moved to a job that got a Designjet T2300. On this machine the D size orients the 24" side parallel. This wastes 1' of paper on the left and uses 1' extra as it runs the 36" side perpendicular. I have been unable to rectify the problem. I have tried printing in portrait, that actually cut off some of the image. I have tried all types of rotation within the driver and layouts. Tech support had me going into the machine settings and set rotation to 90. Nothing. There is a warning that "HP utilities" is not installed. Could this be a remedy? When the tech came to set up the printer he installed the necessary drivers but mad no mention of this utility.
AC2012, HP desighjet T2300
View 1 Replies
View Related
Sep 12, 2012
I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.
View 5 Replies
View Related
Mar 8, 2012
I am trying to PASTECLIP a portion of one drawing to another. The original drawing is the correct size however when it is put into the second drawing it shrinks exactly 3 times its size. I have checked the properties and they are the same.
View 7 Replies
View Related
Jan 10, 2013
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
View 5 Replies
View Related
Mar 7, 2013
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
View 8 Replies
View Related
Sep 26, 2012
Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
View 6 Replies
View Related
Oct 21, 2013
We have a problem with AutoCAD R2011. The drafter made a rectangle, put some M Text in it, and when he looked at the layout the text does not show up. It's on a visible layer, and when he takes some existing text and sticks it in the rectangle, it works fine. We are just using "MatchProp" to work around the problem. Is there a way to "globally" set the text properties of the drawing to those of a particular instance of text?
View 3 Replies
View Related
Dec 17, 2013
when I insert a block that is made up of different layer lines and shapes then they only show up in the model tab. The other layouts I have won't show the blocks even though the same layers are turned on and unfrozen in these other layout viewports just like the model space. It's looking like trying to use multilayer dynamic blocks will be pretty useless unless they work in every layout viewport and not just in model space.
View 5 Replies
View Related
Oct 29, 2013
Is there a way to copy a portion of a drawing in X6 for instance to replicate the portion inside the red square only.
View 9 Replies
View Related
Jun 1, 2011
I was wondering if it is possible to have sum sort of text referance in the layout ofa drawing.
example.
I have border with drawing details,date and who its done by.in multiple layouts
Is it possible to at text in 1 layout and it show up in all the other layouts automatically?
View 9 Replies
View Related
Oct 13, 2012
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies
View Related
Sep 14, 2011
The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies
View Related
Jan 18, 2013
I want to print my finished floor layout but this layout view tab (layout 1) show me a tiny drawing I want it to cover all the A4 format
print.jpg
View 8 Replies
View Related
Jul 6, 2012
How can I print multiple layouts to PDF at one time?
View 9 Replies
View Related
Jan 11, 2013
Attach is the a showing 3 surfaces on a site . How do i embed a material on a surface on the layout page/mode.
In Object viewer it shows clearly the rock material on the surface.
View 1 Replies
View Related
Aug 7, 2013
I have an A4 peice of paper and need to change the scale of my drawing so it fits onto the page. I remember there was a short cut, but have since forgotten it.
It is currently at 1:1 and want to change that to a more appropriate scale.
View 1 Replies
View Related
Nov 3, 2011
I tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
View 9 Replies
View Related
Jan 6, 2014
Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies
View Related
Apr 21, 2012
How to print a viewbase layout with a large scale factor? The problem I'm having with ac2013 is that the print is coming out with jagged edge.
View 9 Replies
View Related
Dec 16, 2013
How do I print drawings with such maps. I cannot seem to find the way to make it print in the layout. Otherwise it is a great new feature!
View 4 Replies
View Related
