AutoCAD 2013 :: How To Print Bing Live Maps In Layout
Dec 16, 2013How do I print drawings with such maps. I cannot seem to find the way to make it print in the layout. Otherwise it is a great new feature!
View 4 Replies
ADVERTISEMENT
AutoCAD 2013 :: Using Live Maps Within Proxies Enterprise Environment
May 7, 2013I have an issue trying to connect to Live Maps. How to implement this through a proxied enterprise environemnt. I've read the posts to use :
Authenticated Proxies:
To use the above mentioned AutoCAD Online components through proxy servers with Authentication enabled, you should enable http (port 80) and https (port 443) access to the following domains in the proxy without Proxy Authentication (i.e. Access for “All users” or Anonymous access through the proxy):
*.autodesk.com
*.google-analytics.com
*.cloudfront.net
We don’t proxy ports 80 and 443 directly (we use 8989-9093 for proxy ports), so I don’t see any way of meeting these requirements at the present time, at least in the wired Enterprise network.
Photoshop :: Print My Maps In A4 And Using Print...
Jul 26, 2009I have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print.I am slightly confused on how to do this for the following reasons:Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size.I am not sure if "document" and "canvas" size are the same? Could somebody please advise me.Basically, I want to enlarge my tiffs to fill a European A4 size page.GF
View 2 Replies View RelatedAutoCAD Print / Plot :: How To Print Multiple Layout Pages In A Printer
Oct 14, 2012I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
AutoCad :: 2012 Layout Print And Designjet T2300 / D Size Incorrect Print Rotation
Jun 13, 2012I have a template with layouts of different sizes that had been working fine with a previous Xerox 6204. My D size and E size automatically oriented with the 36" side parallel to the roll feed. I have since moved to a job that got a Designjet T2300. On this machine the D size orients the 24" side parallel. This wastes 1' of paper on the left and uses 1' extra as it runs the 36" side perpendicular. I have been unable to rectify the problem. I have tried printing in portrait, that actually cut off some of the image. I have tried all types of rotation within the driver and layouts. Tech support had me going into the machine settings and set rotation to 90. Nothing. There is a warning that "HP utilities" is not installed. Could this be a remedy? When the tech came to set up the printer he installed the necessary drivers but mad no mention of this utility.
AC2012, HP desighjet T2300
AutoCAD Print / Plot :: Change Print Limits Of A Layout
Sep 12, 2012I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.
View 5 Replies View RelatedAutoCAD Civil 3D :: Importing Bing Or Google Images
Oct 31, 2013Is there a way to import bing or google images into 2014 similar to the way C3D use to allow with google? Not just to view on screen but to use.
2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
AutoCAD Map 3D :: 2013 - Editing DXF Maps
Nov 26, 2013I'm new to AutoCAD, and especially new to AutoCAD Map 3D. I need to make a plat showing a well location. When using Petra or DrillingInfo, a map can be printed to a DXF. DrillingInfo puts out a DXF with just the 0 layer, and the well spots come in as polyline circles. The DXF Petra puts out opens with different layers and symbology, which I like. It's just that the well spots are blocks, which I do not understand. When I open the Petra map with AutoCAD Map 3D, my well spots are unitless block references, and are tiny specks. I need to resize them so they can be seen.
View 9 Replies View RelatedAutoCAD 2013 :: Disable Live Hatching With Internal Point
Mar 15, 2013If it would be possible to disable the hatch previewing in AutoCad 2013 when you are creating it by clicking internal points, because it makes really slow the hatching work for my machine and sometimes i have to close AutoCad because it freezes.
View 2 Replies View RelatedLightroom :: Print Layout Not Matching Final Print
Sep 26, 2012Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
3ds Max :: Substance Maps Not Rendering In 2013
May 17, 2012The Substance Maps are not rendering with the NVIDIA Mental Ray renderer in MAX 2013.
The maps display nicely in the view port and render with the Default Scanline renderer and the Quicksilver renderer. It also doesn't render with the NVIDIA iray renderer. The same Substance material setup renders fine with the Mental Ray renderer in MAX 2012. What's UP!!
3ds Max :: 2013 Can't Read Or Write Final Gather Maps
Apr 24, 2012Max 2013 now can't read or write final gather maps. I get an error cannot open map file. I have tried using a unc path \server name. I had the problem previously whan I moved to win 7 and I got around it by turning off my UAC. But that is off.
View 1 Replies View RelatedAutoCad :: How To Set Drawing To Layout And Print It
May 22, 2011how to set out a drawing to a Layout from model space?
View 7 Replies View RelatedAutoCad :: Print A Floor Layout
Jan 18, 2013I want to print my finished floor layout but this layout view tab (layout 1) show me a tiny drawing I want it to cover all the A4 format
print.jpg
AutoCad :: Print Multiple Layout To PDF At Once?
Jul 6, 2012How can I print multiple layouts to PDF at one time?
View 9 Replies View Related3ds Max :: Lighting Maps And Material Maps Intact
Feb 28, 2011I would like to know if I can import my AutoCAD 3d file into 3DS MAX, with the lighting maps and material maps intact. This is because I am doing my thesis on AutoCAD 2011 but I would like to use 3DS Max to do a walk through video.
View 3 Replies View RelatedAutoCad :: Use Layout To Print - Scaling Drawing
May 25, 2011Scale in Layout. I drew my drawing in mm , and I want to use Layout to print it like I saw in a video, but how do I scale my drawing? For example, the counter and shelf I drew is 1:1 in the Model workspace(1600 by 2000mm) but in Layout, for printing on to an A3 sized paper how do I get it to print in 1:40 or something of that sort?
Right now I'm printing by using Fit To Paper with the dimensions included, but I notice our contractors are using 1:30, 1:40 etc. , my boss doesn't mind since I include the dimensions but I reckon it might cause problems in the future.
And is it possible to just select anything in my selection window, even 3/4 of a line? Because right now, I can only select the whole line no matter what, I only want 1/2 of it because I want to cut the whole drawing in half and move it apart.
By the way, is it possible to customize the panel? Instead of switching between tabs constantly, can I make my own panel? I googled this and tried using CUI but it is confusing. I just want certain sections grouped into 1 bar. Like... Draw/Modify/Attach/Windows all on the first panel.
I really want to be able to type in certain commands without hitting Enter, is that possible? If I hit M, it will move the object without me hitting Enter. Can that be done? Maybe not M, maybe Alt+1 to move, Alt+2 to Scale etc. etc.
AutoCAD Print / Plot :: Preparing A Layout Space
Aug 7, 2013I have an A4 peice of paper and need to change the scale of my drawing so it fits onto the page. I remember there was a short cut, but have since forgotten it.
It is currently at 1:1 and want to change that to a more appropriate scale.
AutoCad :: How To Print Multiple Drawing In One Layout Combined
Jun 19, 2013I want to print multiple drawing in a single layout (see picture) . It is possible in autocad to setup printing once? For example: One project contains 100 A3 drawing, one layout contains 20 A3 drawing. Up to now, i print to pdf separately, and i combined the 100 pdf in one file.
And i print from this file. (only in this way succeed to print collating multiple copies). But if the project changes, I could start all over again. Is there a solution to publish an combining the sheets to print immediately?
AutoCad :: Print Or PDF Drawing In (8.5x11) Layout View?
Apr 5, 2012My issue is this: While trying to print or pdf a drawing in (lets say 8.5x11) layout view, the edges get cut off. It looks as though the template I copied is too large to be printed in full. If this were the case, wouldn't it be the same even if I tried printing in extents? It still does the same thing printing in extents.
I am using Mechanical 2012.
AutoCad :: Trying To Show Only Portion Of Drawing In Layout To Print
Feb 2, 2014How to get only part of the drawing to show up to print. I've drawn a floor plan and have copied it several times. I have also drawn several patterns that represent a few different floor tile layouts and then put them over each floor plan and after some trimming I have a variety of options that someone can choose from for floor tile layout. I'd like to show each one on a separate sheet and of course when I go to layout the whole drawing comes over and how to only show one floor plan at a time.
View 4 Replies View RelatedAutoCAD 2010 :: Crash When Print Layout In Windows 7
Nov 3, 2011I tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
Xara :: XPDG MX 2013 - Why Doesn't Live Effects Button Bring Anything Up
May 9, 2013As I'm trying to learn more of my new programs, I finally came across a tutorial that covered the Live Effects. However, after I've open and created an object (star)(that's another story), I go to the Live Effects button (per the tutorial) but nothing opens. Left click, right click, nothing brings anything up.
Also, in the tutorial it started by drawing the star object...click the icon draw a star, and I get a 6-sided filled object. No star to be found. The oval and rectangular objects draw fine. But no star obect.
I'm at the point where I don't know what should or shouldn't be somewhere or if something is or isn't working. I understand that the Live Effects can be pointed to an external folder where 3rd-party plugins should go, but I was also getting the feeling that something came with the program install (per the tutorial). I've gotten used to things not working in these Xara and Magix programs I purchased, so unlike my first couple of posts, the anger and frustration are being left out.
AutoCAD Print / Plot :: Aligning Title Block In Layout Tab?
Jan 6, 2014Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedAutoCad :: Print Viewbase Layout With Large Scale Factor?
Apr 21, 2012How to print a viewbase layout with a large scale factor? The problem I'm having with ac2013 is that the print is coming out with jagged edge.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labels / Text Aligning To Layout Print Out Very Bold
Sep 17, 2013When I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
AutoCAD Print / Plot :: Change Page Setup In All Layout Tabs
Nov 8, 2003I get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedAutoCAD Print / Plot :: Named Page Setups Don't Stay Assign To Layout Tabs?
Feb 24, 2012We have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies View RelatedAutoCAD Print / Plot :: Why Drawing Plots Results Using Viewport Scale In Layout Is Not Accurate?
Oct 8, 2013why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies View RelatedAutoCAD 2013 :: 2013 Thin Lines Do Not Print On Mac?
Feb 15, 2013Okay. So our designer is using autocad 2013. He is using a pc and he is sending me the files (i'm on a mac) and the thinest lines do not show or print. But, they print/show on a pc! I need to be able to print these. I've searched the web and found nothing.
View 3 Replies View RelatedAutoCAD 2013 :: X64 And DWG TrueView 2013 X64 Crash When Print?
Aug 29, 2012Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725