AutoCad :: 2012 - Possible To Cut Image
Jan 8, 2012Is it possible in autocad 2012 to cut an image?
View 8 Replies
ADVERTISEMENT
AutoCad :: LT 2012 Mac - Possible To Insert Image Without Reference?
Nov 23, 2011I have a small logo jpg that was a Windows OLE object inserted into each drawing I do. This image was saved within the file.
It now appears that with 2012 LT I have to insert an image as a reference. Is there any way around using a linked file as I want to open these drawings without worrying about whether or not I have the logo file stored in the correct place.
AutoCAD Map 3D :: Adding Raster Image Locks Up 2012
May 16, 2012I've rebooted, re-installed and nothing changes the fact that when i try and insert a raster image the program locks right up.
I can go back 2009 version and have no problems inserting the same raster. The raster is a Mr.Sid format file
AutoCAD Map 3D :: Image Insert Crashes Program - 2012?
Sep 16, 2011Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies View RelatedAutoCAD 2010 :: Set To 0 Transparency Of Image Text In 2012?
Jun 21, 2012Can I set to zero trasparency of image, text in Autocad 2012? How can I do it?
View 3 Replies View RelatedAutoCad 2D :: Unlock Image Aspect Ratio In 2012
Nov 1, 2011I just imported an image into AutoCAD 2012 and I need to resize the height without the width being resized as well. I guess I could use a program like Photoshop to do it before importing but I was wondering if this could be done within AutoCAD.
View 1 Replies View RelatedAutoCAD Inventor :: Studio 2012 Has Speckles All Over Output Image
Jan 12, 2012When I render a PNG image with Studio there are speckles all over it as in the attached sample.
View 3 Replies View RelatedAutoCAD Civil 3D :: Drape Image Too Small Flipped Upside Down 2012?
Nov 1, 2012I'm having an issue with draping a google earth image onto a surface that was imported at the same time. The image flips over and shrinks down into one corner. Not sure shat I'm doing wrong, if it's just a setup problem or an actual bug or something. I have the image attached.
View 3 Replies View RelatedAutoCAD 2010 :: Install 2012 And LT 2012 On Same Computer?
Mar 29, 2012Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedGIMP :: Getting The Opposite Side Of Image (2012)
Jun 26, 2012I have an image of a car with a view of looking from the back and to the left, i.e.
[URL].......
I would like to change the view from the back and to the right. Does Gimp have the functionality to do that.
GIMP :: Digitizing / Tracing Image With 2.8 (2012)
Jun 25, 2012I am considering using GIMP 2.8 on my system with Mac OS X 10.6.8 to do thefollowing:
(1) Digitise a photograph by tracing over parts of it with lines. The photocould be, say, the roots of a tree. The lines would be colour codeddepending on the state of what they are over. I.e. roots in one state getstraced with one colour, while roots in another state would get a differentcolour. In the end I might end up with a bunch of lines, with the differentcolours of lines organised in different layers.
(2) Calculate the relative proportion of lines of a certain colour to thetotal length of all lines.
To do the above, I am wondering if GIMP has the ability to calculate thelength of lines drawn over an image (in, say, number of pixels). This way, Ican obtain the total pixel length all lines put together, and the totalpixel length of, say, just the blue lines.
Do you think GIMP is suitable for this kind of image analyses? Or should Iuse a vector based program like Inkscape?
GIMP :: Export Layers As Image Sequence (2012)
Jul 30, 2012Any plugins that will do the job in GIMP?
View 3 Replies View RelatedGIMP :: How Make Image Fade To Black (2012)
Aug 20, 2012I am trying to make my image fade to black on one side. I have read the blend tool tutorial in the user manual but all I can get to hap pen is a black and white gradient completely covering my image. I have tried adding a transparent layer over the image and applying the gradient to it but for some reason when one side of the image (using the linear mode) starts to get darker, the other side gets lighter, creating a severely distorted contrast with the image, plus the fade covers an entire half of the image.
View 1 Replies View RelatedLightroom :: Major Change In Image When Switching To 2012 Process
Mar 7, 2012When I change to process 2012 on an image that has been worked in 2010 I'm seeing a big change in the image, much brighter, less contrast. Any way to closely preserve the old look while updating the process?
Also wondering what the new 2012 process brings to the image, aside from access to the new tools. Will I see a better (or just different) rendering of the image from older files?
GIMP :: Paste Single Image In New Doc Pastes Multiple Times (2012)
Jun 28, 2012When I cut, and copy an image to the clipboard and then paste the image into a new, blank page, it pastes the image multiple times (about 20) on the one page. How can I revert to it pasting just one image?
View 1 Replies View RelatedAutoDesk Smoke :: Moving Projects From 2012 SP3 To 2012 SAP2 SP3?
Sep 25, 2012After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
AutoCAD LT :: Can Run 2012 On OS 10.6.8
Oct 10, 2011Can I run autocad 2012 Lt on OS 10.6.8? Do I need to have windows installed on my Mac?
View 1 Replies View RelatedAutoCAD Map 3D :: WMS Connection In 2012?
Jun 25, 2012I'm trying something I believe to be fairly basic: I'm trying to get some base mapping into my Map 3D drawing.
In particular, I need to get the World Street Map found here: [URL] ......
In Map, under Data Connections, I'm using "Add WMS Connection"
I give the connection a name, enter the Server name, and leave Version on "Default version"
I leave username and password blank.
But I always get the error message: "Failed to connect."
Do ESRI and AutoCAD just not play well together?
AutoCad :: MEP 2012 - Ribbon Looks Different?
Sep 13, 2012I am using ACAD MEP 2012. While i was working on a drawing my AutoCAD session locked up and terminated the program, not thinking anything of it i just restarted ACAD and started working on the same drawing. I noticed the ribbon looks different and now all the command buttons are not showing up under the tabs they are ALL in dropdown windows now. I don't know what happened to the original ribbon setup but it is definitely not what it used to be. Attached below are pics of what i am referring to. The first picture is what it used to look like, the second and third pictures are what they look like now.
View 6 Replies View RelatedAutoCad :: How To Create A PDF From 2012 DWG
Jan 12, 2012Just wanted to run this by everyone. I'm using Autocad 2012 and having problems with text dropping out when i create a PDF file from my DWG.
It just happens randomly. Most times we just re-PDF the dwg and it's fine. I'm wondering if the way I go about it, /plot, and using "Adobe PDF" to print my PDF is what everyone is using.
AutoCad :: Mirroring In 2012 For Mac?
Jan 30, 2012I am attempting to mirror an object, using an endpoint but 6.5 units to the right of it. However, i don't seem able to do it, as when i mirror the objects they just end up touching.
I know the 2012 version doesn't have dialog boxes for features such as hatching and the array commands, it is possible to set it up on this version so these options become available.
AutoCad 2D :: Get Fonts Into 2012?
Sep 20, 2012I have a drawing that only show 'Standard' as font in Style box. How do I see the rest of the fonts I have??
Also, how do I get linetypes like 'Fence' into the drawing?
AutoCad :: 2012 MAC - Some Menu Does Not Appear
Dec 6, 2011Since a few days I have the following issues with some menu's.
command; CUI - menu for half a second visible Pagesetupedit - menu does not appear Insert - menu does not appear
AutoCad :: Open STL In 2012?
Jun 2, 2012I received some STL files that I would like to open in Autocad2012. I don't know how?
View 3 Replies View RelatedAutoCAD LT :: 2012 Crashing Upon Opening?
Oct 25, 2011I have installed Autocad 2012 LT on Windows XP sp3. The program opened and worked fine after the install. The user was not sure they wanted this version so I did not activate the program right away. After the user decided they wanted to keep this version I activated the program with a license and now the program will not open. Crashes and does not give an error message.
I have tried to uninstall and re-install. I uninstalled netframework 3.5 sp1 and re-installed, still will not open.
AutoCAD Inventor :: Using MDT2009 With 2012?
Jan 4, 2012I have Inventor 2012 running on WIn7, 64-bit system. As i want to use also MDT2009, i´ve downloaded it from the autodesk server and followed the instructions from the site. Now im not able to install MDT. When trying to install it, it says the installation can´t find inventor on the system. Its definitly present on the system and i don´t know how to go on.
View 7 Replies View RelatedAutoCAD :: Move Up To Architecture 2012
Oct 26, 2011I just installed Architecture 2012 & want to add my Lisp & CUI files.I don't see support folder
Where & how do i install my Lisp & CUI files from Architecture 2010 to Architecture 2012
AutoCAD Map 3D :: Measuring Areas In 2012?
Jul 15, 2011I've tried to measure the area of a road layout (that includes curves) and it is giving me a completely unrealistic answer (310,000m2 instead of 41,000m2). If I de-curve the lines, the area is about right, but the lines MUST remain curved for me to get the most accurate measurment. why curves aren't being measured properly, and is there a setting I can use to make sure this doesn't happen again?
View 4 Replies View RelatedAutoCAD 2010 :: 2012 Will Not Respond
Mar 18, 2013I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..
View 4 Replies View RelatedAutoCAD LT :: 2012 Not Printing Any Images
Sep 26, 2012One of the clients at my work is experiencing difficulty printing using AutoCAD LT 2012. When he prints, only a blank page comes out of the printer. I have tested the printer and I am sure it works properly. It printed both a Windows test page and a color photo with no problems, which is leading me to believe that he has a setting within the program that should be changed.
View 3 Replies View RelatedAutoCAD LT :: 2012 - How To Get Array Window
Apr 28, 2011Just installed CAD 2012 LT...how can i get the array window we use to have on previous editions to work again on this edition? When i used to select array on the ribbon, a window was opening, and i choose what i wanted to do...but now,
No window appear, i tried to follow the command.