AutoCAD Inventor :: Studio 2012 Has Speckles All Over Output Image
Jan 12, 2012When I render a PNG image with Studio there are speckles all over it as in the attached sample.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Increase DPI For Image Output Besides Through Studio?
Oct 21, 2012Any way to increase DPI for image output besides rendering in Studio?
When I save as image file I get option for size, of course, but no option for DPI.
AutoCAD Inventor :: How To Prepare Visual Studio 2010 Express For Use With 2012
Aug 28, 2011I'm looking for the complete instruction set prepare Visual Basic Studio 2010 Express to program Inventor 2012 Professional.
At the moment, all I've done is to install VB Studio Basic 2010. If I'm not mistaken, don't I have to "configure" VB 2010 Express so it can be used with Inventor 2012?
AutoCAD Inventor :: Stop Auto-hide For Studio Render Image Dialog?
Aug 28, 2012I cannot find any way to switch off the auto-hide for the Render Image menu in Inventor Studio 2013. I know how to do it for other menus, and Bobvdd posted a registry hack a couple years ago for 2011. I cannot find anything for this dialog, and I would really like it to stop.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
AutoCAD .NET :: 2012 Crash During Debugging Session With Visual Studio 2010
Jul 14, 2011Dev env: AutoCAD 2012, VS 2010, ObjectARX.Net 2012
A simple windows form command dll to test within the VS2012 + AutoCAD 2012
Bug: when debugging with VS2012, the first command runs fine and I can debug it with breakpoints etc etc. However, after the first debugging session, if I try "File"->"Open" or "New", file dialog will popup and then my AutoCAD 2012 crashs.
It won't happen if I compiled the dll, and load directly from AutoCAD independantly running instance.
3ds Max :: Studio 2012 - Orbit Tool On Selected Object
Apr 21, 2011Is it me or is the viewport-orb tool changed?When I select an object (in perspective mode, not otho) - and press Z to zoom-extend the chosen object, I can rotate around it, but when performing a second "orb"-around, the "zoom-locked-extends" is gone and he orb-rotates around the SCENE and not the chosen object anymore?
what gives?... (same principle when in sub-object mode - 1st orb-rotate around the chosen object is good. When going out of orb-rotate and orbing around to the other side of the object or whatever, the "zoom-extends-region" is "scenafied" as in scene-a-fied bug or new feature? if new feature, how the hell to turn it off.
AutoCAD Inventor :: Components Fade In / Out In Studio
Feb 22, 2012Look at the vifdeo file attached. I have not problem to create one component fade out (from 100% to 0%). But how to show the another component fade in (from 0% to 100%)? Studio does not allow fade from 0% to 100%.
View 4 Replies View RelatedAutoCAD Inventor :: No Add In Template For Visual Studio?
Jul 2, 2013i have installed the SDK for inventor 2014, but there is no add in template for Visual studio?
can i get one from anywhere?
AutoCAD Inventor :: Animation Studio Error
Jul 26, 2012I've been working in Inventor Studio (Inventor 2011) & every time I exit & return to the assembly environment I receive an error message (refer attached). Plus if I don't move the animation timeline back to the beginning prior to exiting, my model will display in its finished position but on the timeline be at the beginning when I go back into Studio.
View 1 Replies View RelatedAutoDesk Smoke :: Mac 2012 SP2 Output Dual Stream Stereo To HDCam SR
May 31, 2011Can Smoke on Mac 2012 sp2 output dual stream stereo to HDCam SR?
View 5 Replies View RelatedAutoCAD Inventor :: Can't Expand Studio Animation Window
Feb 23, 2012I collasped my animation window and I can't resize it to show my animation timeline. I can only resize the window left and right??? I have exited studio environment and re-enter and still can't resize window up and down.
Inventor 2012 Certified Professional
Software: Autodesk Inventor Professional 2012 64 Bit- Service Pack 1
Operating System:64 bit-Windows 7 Enterprise-SP1
Processor: Intel Core 2 Duo CPU P8700 @2.53GHz
RAM: 16 GB
AutoCAD Inventor :: Alternatives To Studio For Animations And Renderings
Apr 10, 2013I would like to animate and render a 30 second video of something similar to the attached assembly. I have been using Inventor Studio to apply animations to the components, render them as full frame AVI (800 MB files), and compress them with Sony Vegas Pro free trial (~120 MB).
The attached assembly is a simplified example and took me around three hours to model, constraints, animate, and render from scratch. Normally, the boxes are constantly starting and stopping and moving at different velocities. Defining distances and times is cumbersome especially since I need to be aware of the boxes' positions relative to each other so they do not appear to move at different speeds or overlap.
I think a solid modeling program might not be the best tool to animate loose components sitting on a conveyor belt. Inventor slows down and occasionally crashes when I get up to 40 or 50 boxes stopping and starting and moving at different velocities. I am inclined to think that 10 or 15 animated conveyor belts moving boxes with a coefficient of friction would be near impossible on my machine (modeling the belts similar to a track on a tank or a chain and sprocket, also constantly starting and stopping and moving at different velocities).
I haven't played with Showcase, 3ds Max Design, or Navisworks Simulate. Would it be worthwhile to try any of these to animate and generate videos?
AutoCAD Inventor :: Animating Positional Representations In Studio?
Aug 3, 2010I'm using 2011 pro. When I try to animate a positional rep in inventor studio, it complains that I don't have excel installed. (see attached image) although I do have it installed. I've put the hotfix on for excel, with no effect. I've repaired inventor and repaired excel no fix though.
View 9 Replies View RelatedAutoCAD Inventor :: Studio Reflective GP Shows Cut Reflection
Jul 25, 2006I have a problem with Inventor 11 Studio. The reflection on the ground made by "XZ Reflective Gp" works in a way that when rendered, it shows a partial or cut reflection of my assembly, see attached .jpg file. I have not found yet where this "reflection depth" is regulated.
View 9 Replies View RelatedAutoCAD Inventor :: Animate Two Gears In Studio 2011
Sep 20, 2011I have two gears. In the assembly I have them setup to mesh correctly. I can drive the constraint on the pinion and the gear will follow it (some what). I wanted a better video of it, so I went into Studio. Now when I drive the constaint like before on the pinion, the gear goes crazy.
[URL]
There is a rotational translation constraint set between the pair (= to inverse of gear ratio) that works in the iam, but it is like Studion ignores it. How can I animate this to show the gear mesh?
GIMP :: Despeckle Makes Speckles WAY WORSE
Dec 17, 2012I used an online txt to jpg converter and it generated a jpg of the txt file as if it was screencapped because it was too large to manually screencap it... but there is tons of speckles around the lettering and when I use despeckle it makes the speckles SO MUCH WORSE, you cannot ever read the text!!! I don't know why despeckle is doing the EXACT OPPOSITE!!!
View 1 Replies View RelatedLightroom :: Black Speckles When Using Adjustment Brushes
Apr 15, 2013I'm having an ongoing issue with Lightroom 4.4 when using adjustment brushes in the development module with RAW files from a Canon 5d Mark III Raw on a retina MacBook Pro running OS 10.8.3 When using the adjustment brush to make exposure adjustments, the adjusted area gets covered with tiny black speckles. I see it when trying to darken down highlights or when trying to lighten shadow areas. The heavier the adjustment, the worse the speckles get. I have taken the same original images and opened them in Photoshop and made similar local adjustments with curves and the images look fine, so it's definitely an error with Lightroom inserting the artifacts.
View 2 Replies View RelatedAutoCAD Inventor :: Publish To Studio - Dynamic Simulation Error
Dec 28, 2011I have a robot that I am animating in Dynamic Simulation. I have Imposed motion on each of the relevant joints, and can run the simulation nicely.
The problem occurs when I "Publish to Studio" I loose all functionality and the robot stays still in the Studio environment.
AutoCAD Inventor :: Animating Constraints Gets Incredibly Slow In Studio?
Nov 27, 2011I am working on a simple animation. A camera pans and turns from isometric view to a left side view of a mechanical device, which runs all ok and at a fairly reasonable speed. Now the next thing I animated, was an angle constraint. The animation moves a lever which in turn moves some gears, and then each frame takes about half a second to elapse (an very long interval when talking about video). The strange thing is that out of Inventor studio I can supress the angle constraint and move the lever (and thus the gears too) very fluidly.
View 2 Replies View RelatedAutoCAD Inventor :: Import Studio Animation To Autodesk Showcase?
Dec 27, 2011How to import the inventor studio animation to autodesk showcase? i have created the animation by inventor studio and i gonna record it as a movie but then i found that the movie quality is terrible and its take very very very long time to proceed if using inventor!
View 3 Replies View RelatedAutoCAD Inventor :: Studio Errors - Constant Speed Option
Jul 11, 2013why I might be seeing this error? I get this as soon as I select the "Constant Speed" option. I haven't input any other values yet. I've already set the "constant speed" option on the animation timeline menu. I also only get this error when this sub-assembly is inserted into a higher level assembly. If I animate the same components in the sub-assembly file, it works fine. What am I missing? There are no parameters holding these components in place in this upper assembly either, that was the first thing I checked.
View 1 Replies View RelatedAutoCAD Inventor :: Worth Disabling Default Addins (Studio)?
Sep 26, 2012(Inv 2010 Win7 64bit 8GB RAM)
Firstly is it even worth disabling things like Studio/Frame generator/content center in the Add-in manager if I never use them? I was hoping to at least reduce initial load time for inventor.
Secondly, do i need Win7 admin permission to do it? When I uncheck 'Load on Startup' settings in the Add-In Manager they just re-check themselves.
AutoCAD Inventor :: Could Not Activate Rendering Icon To Access Studio
Jan 30, 2012Just started the rendering tutorials. Opened a iam file but could not activate the rendering icon to access inventor studio. Tried several iam drawings even created a simple one. how to get this feature to work?
View 5 Replies View RelatedAutoCAD Inventor :: Studio Render Is Making One Part Shiny
Jul 30, 2013The parts in my assembly all use the same appearance. When I come to to do a render of my model however it is rendering one of these shiny (I think thats what it called).
See attached images
Image1 shows how I want it to look (this is the opposite end of my assembly)
Image2 shows the problem
Image3 shows a different appearance give to the problem part
The problem part is derived from the other end of the assembly (the part show in image1). All the parts at this end of the assembly are created the same way. They all render fine its just this one. I have tried recreating the part but still end up with the same result.
AutoCAD Inventor :: Edit Point / Spotlight Target In Studio
Sep 26, 2011I'm trying to create a scene in IV Studio using point lights. If I want to change the position of the light's target, IV won't let me.
The option is simply not available. Not in the dialog (see attached image) an not in the graphics region (clicking the glyph's).
According to the help text, it should be possible (see attached image). The problem persist in both normal lighting styles as in local lights.
AutoCAD Inventor :: Studio Assembly Animation - Part Parameter
Nov 8, 2013I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
AutoCAD Inventor :: Professional 2013 Can't Run Studio Environment Interface?
Mar 16, 2013I think that something is not the way it is suppose to be at my ribbon I have a Inventor Studio icon but by defaults is not active (it's grayed out) so in order to turn it on I have to go to add ins and turn Inventor Studio off and than on again and in that way I am able to activate the Inventor Studio button but after that all the buttons in the Rendering Studio tab are inactive so I cannot use them. And I cannot figure out where is the problem. Is it because I am using the student version of the software and it has some kind of limitations on the rendering engine, or it is some kind of malfunctioning of my installation. Everything else is working normally I can modell I can do a rey tracing viewport renders but I cannot run the studio environment interface.
View 5 Replies View RelatedAutoCAD Inventor :: Studio - Unintended Zoom Out When Pressing Add Camera Action?
Mar 25, 2013I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
AutoCAD Inventor :: Relationships Created With Joint Command Fail In Studio
Oct 17, 2013Now Inventor allows users to create relationships with Joint or Constrain/Assemble commands. Both of these methods let the creation of Positional Representation, but when animating them in Inventor Studio, only animations created with Pos Reps from constraints work. Animated Pos Reps created with joints don't work at all.
Is this a bug? Will this problem be fixed soon (with SP, Updates or any Hotfix), or would it be fixed in the next release?
AutoCAD LT :: Raster Image Alignment In Output Pdf File
Oct 29, 2013I am using a tiff file as a Raster Image Reference while drawing over it in AutoCad LT for mac. The raster file is 8200 x 5700. If I examine the autocad drawing by zooming in closely the alignment is perfect. However, when I create an A0 pdf file of the drawing there is an alignment error between the raster image and the vector drawing on the x axis. The y axis alignment is perfect.
I believe it is a scaling error since there is no visible alignment error on the left hand side of the drawing and the error increases across the drawing to the right hand side. The error is small, about 0.2% but it is clearly visible in the pdf file.
To illustrate the problem I have put a test mark on the top right hand corner of the drawing outline and the attached file shows this portion of the drawing in autocad on the left and in the pdf file on the right.
I have tried different drivers and plot settings but the error is always there.
AutoCAD Inventor :: Recreate A Bunch Of IV-Studio Settings To Match A Bunch Of Renders
Jun 12, 2012I'm trying to recreate a bunch of IV-Studio settings to match a bunch of renders made by previous staff that did not leave behind the assembly files they used to make them in the first place.
I've ran into a problem with some parts displaying incorrectly. (they display incorrectly in the render/in the studio environment/ in the assembly/ and when in the part file) I've played with material and appearance styles but they have no effect, I've also tried quality/performance/compatibility hardware modes.
We have 5 or 6 parts that share the ridge pattern that is causing problems and they are affected in the same way.I'm running XP(32), IV2012-sp2, fx1800 with 6.14.0012.6570 drivers.