Just started the rendering tutorials. Opened a iam file but could not activate the rendering icon to access inventor studio. Tried several iam drawings even created a simple one. how to get this feature to work?
View 5 RepliesHow to activate or disactivate this icon (the one with two arrows): I think it has a relation with large surface visualization.
View 2 Replies View RelatedI am no closer to activating CS6.I do not have an internet connection on the machine I am installing it on. I have the disk. But, no way to activate it.
Spent an hour waiting for the adobe installer to download on this machine and it never gave a code - couldn't even find one.How do I activate CS6 - or did I waste the money and need to send the disk back and quit this stuff?
Downloaded GIMP 2.8 this morning (twice) and after installation there were no icon to access the program.
View 1 Replies View RelatedI hope soemone knows how to regain access to the rendering dialog box.
I was operating on a 2560x1600 screen and I guess I happened to have the rendering dialog box at the far right. I had a hard drive failure yesterday, so while that is being fixed, I'm running on another computer at 1920x1200 and that dialog box isn't visible.
How to reset the dialog box or force it back onto the visible screen?
(It would be really sweet if the software was programmed to recognize the current desktop setting and ensure this kind of thing doesn't happen.
I am self-taught in AE and must have missed something basic here.
I am simply trying to set which image (frame) will appear as the icon for a renedered comp. I understand how to set the poster frame for a comp, and I get the desired result in the project window when the comp is selected. I "set poster time" while the timeline window is selected as well, but when my comp is renedered the icon is always the frame at 10 seconds on the timeline.
When selecting the render video command, a progress bar appears stating "Initializing Video Export", and gets most of the way done but then freezes. At this point a dialogue pops up saying that "Required software extensions are missing" and that if one presses okay it will direct to the PACE website where an installer can be downloaded. But this dialogue then proceeds to freeze as well. The little circle of death spins forever in front of it and neither button may be pressed. Went to the PACE website and looked at their anti-piracy "tools" and it all seemed rather weird. Anyway, what is the way past this empasse?
I have an older late 2008 macbook pro with OS 10.8.3, running Photoshop CS6.
Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedI have a problem wit Revit 2014 from BDS Premium. I don't have 3D default view icon in Quick Access Toolbar and I can not add it. I tried to right click on QAT and customize it but unfortunately 3D view is not in the list and it can't be added by righ clicking on the icon.
View 3 Replies View RelatedLook at the vifdeo file attached. I have not problem to create one component fade out (from 100% to 0%). But how to show the another component fade in (from 0% to 100%)? Studio does not allow fade from 0% to 100%.
View 4 Replies View Relatedi have installed the SDK for inventor 2014, but there is no add in template for Visual studio?
can i get one from anywhere?
I've been working in Inventor Studio (Inventor 2011) & every time I exit & return to the assembly environment I receive an error message (refer attached). Plus if I don't move the animation timeline back to the beginning prior to exiting, my model will display in its finished position but on the timeline be at the beginning when I go back into Studio.
View 1 Replies View RelatedI collasped my animation window and I can't resize it to show my animation timeline. I can only resize the window left and right??? I have exited studio environment and re-enter and still can't resize window up and down.
Inventor 2012 Certified Professional
Software: Autodesk Inventor Professional 2012 64 Bit- Service Pack 1
Operating System:64 bit-Windows 7 Enterprise-SP1
Processor: Intel Core 2 Duo CPU P8700 @2.53GHz
RAM: 16 GB
I would like to animate and render a 30 second video of something similar to the attached assembly. I have been using Inventor Studio to apply animations to the components, render them as full frame AVI (800 MB files), and compress them with Sony Vegas Pro free trial (~120 MB).
The attached assembly is a simplified example and took me around three hours to model, constraints, animate, and render from scratch. Normally, the boxes are constantly starting and stopping and moving at different velocities. Defining distances and times is cumbersome especially since I need to be aware of the boxes' positions relative to each other so they do not appear to move at different speeds or overlap.
I think a solid modeling program might not be the best tool to animate loose components sitting on a conveyor belt. Inventor slows down and occasionally crashes when I get up to 40 or 50 boxes stopping and starting and moving at different velocities. I am inclined to think that 10 or 15 animated conveyor belts moving boxes with a coefficient of friction would be near impossible on my machine (modeling the belts similar to a track on a tank or a chain and sprocket, also constantly starting and stopping and moving at different velocities).
I haven't played with Showcase, 3ds Max Design, or Navisworks Simulate. Would it be worthwhile to try any of these to animate and generate videos?
I'm using 2011 pro. When I try to animate a positional rep in inventor studio, it complains that I don't have excel installed. (see attached image) although I do have it installed. I've put the hotfix on for excel, with no effect. I've repaired inventor and repaired excel no fix though.
View 9 Replies View RelatedAny way to increase DPI for image output besides rendering in Studio?
When I save as image file I get option for size, of course, but no option for DPI.
I have a problem with Inventor 11 Studio. The reflection on the ground made by "XZ Reflective Gp" works in a way that when rendered, it shows a partial or cut reflection of my assembly, see attached .jpg file. I have not found yet where this "reflection depth" is regulated.
View 9 Replies View RelatedI have two gears. In the assembly I have them setup to mesh correctly. I can drive the constraint on the pinion and the gear will follow it (some what). I wanted a better video of it, so I went into Studio. Now when I drive the constaint like before on the pinion, the gear goes crazy.
[URL]
There is a rotational translation constraint set between the pair (= to inverse of gear ratio) that works in the iam, but it is like Studion ignores it. How can I animate this to show the gear mesh?
After deleting some rips and corner seams on my model, I can no longer create rips, unfolds, or refolds. They all come up with the same message as shown in attached picture.
View 3 Replies View RelatedHow to activate specific Tab on the Ribbon by VB.Net code? Exist any way how to "bring to front" my own Ribbon Tab?
View 4 Replies View RelatedI have a robot that I am animating in Dynamic Simulation. I have Imposed motion on each of the relevant joints, and can run the simulation nicely.
The problem occurs when I "Publish to Studio" I loose all functionality and the robot stays still in the Studio environment.
I am working on a simple animation. A camera pans and turns from isometric view to a left side view of a mechanical device, which runs all ok and at a fairly reasonable speed. Now the next thing I animated, was an angle constraint. The animation moves a lever which in turn moves some gears, and then each frame takes about half a second to elapse (an very long interval when talking about video). The strange thing is that out of Inventor studio I can supress the angle constraint and move the lever (and thus the gears too) very fluidly.
View 2 Replies View RelatedHow to import the inventor studio animation to autodesk showcase? i have created the animation by inventor studio and i gonna record it as a movie but then i found that the movie quality is terrible and its take very very very long time to proceed if using inventor!
View 3 Replies View Relatedwhy I might be seeing this error? I get this as soon as I select the "Constant Speed" option. I haven't input any other values yet. I've already set the "constant speed" option on the animation timeline menu. I also only get this error when this sub-assembly is inserted into a higher level assembly. If I animate the same components in the sub-assembly file, it works fine. What am I missing? There are no parameters holding these components in place in this upper assembly either, that was the first thing I checked.
View 1 Replies View Related(Inv 2010 Win7 64bit 8GB RAM)
Firstly is it even worth disabling things like Studio/Frame generator/content center in the Add-in manager if I never use them? I was hoping to at least reduce initial load time for inventor.
Secondly, do i need Win7 admin permission to do it? When I uncheck 'Load on Startup' settings in the Add-In Manager they just re-check themselves.
The parts in my assembly all use the same appearance. When I come to to do a render of my model however it is rendering one of these shiny (I think thats what it called).
See attached images
Image1 shows how I want it to look (this is the opposite end of my assembly)
Image2 shows the problem
Image3 shows a different appearance give to the problem part
The problem part is derived from the other end of the assembly (the part show in image1). All the parts at this end of the assembly are created the same way. They all render fine its just this one. I have tried recreating the part but still end up with the same result.
I'm trying to create a scene in IV Studio using point lights. If I want to change the position of the light's target, IV won't let me.
The option is simply not available. Not in the dialog (see attached image) an not in the graphics region (clicking the glyph's).
According to the help text, it should be possible (see attached image). The problem persist in both normal lighting styles as in local lights.
I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
When I render a PNG image with Studio there are speckles all over it as in the attached sample.
View 3 Replies View RelatedI think that something is not the way it is suppose to be at my ribbon I have a Inventor Studio icon but by defaults is not active (it's grayed out) so in order to turn it on I have to go to add ins and turn Inventor Studio off and than on again and in that way I am able to activate the Inventor Studio button but after that all the buttons in the Rendering Studio tab are inactive so I cannot use them. And I cannot figure out where is the problem. Is it because I am using the student version of the software and it has some kind of limitations on the rendering engine, or it is some kind of malfunctioning of my installation. Everything else is working normally I can modell I can do a rey tracing viewport renders but I cannot run the studio environment interface.
View 5 Replies View RelatedMacros in inventor drawing are not activating or it is not automatically generating vba codes.
when creating macros and i assign dimensions to objects but the macros are not generating any codes.