After deleting some rips and corner seams on my model, I can no longer create rips, unfolds, or refolds. They all come up with the same message as shown in attached picture.
View 3 RepliesHow to activate/execute 2dsketch command using vba?
it would be identical to just pressing the sketch button.
i need the code to add to the macro im creating.
How to activate specific Tab on the Ribbon by VB.Net code? Exist any way how to "bring to front" my own Ribbon Tab?
View 4 Replies View RelatedMacros in inventor drawing are not activating or it is not automatically generating vba codes.
when creating macros and i assign dimensions to objects but the macros are not generating any codes.
Is it in ilogic possible to check which pos rep that is active using a rule? Is it possible to activate a view rep using a rule?I'd like to do something like: If this "pos rep name" is active, then activate this "view rep name".
View 3 Replies View RelatedI want to insert a conical slot in a part file, or a part in an assembly which i edit in place.
I was told to activate content center, but how?
I don't find the button.
I'm trying to setup a custom form that matches my company's title block information. My desired end result is to eliminate the need to open the iproperties (some users find it confusing/inconvient). I have a seperate tab for the check/status information listed in the "status" tab of the iproperties. In the iproperties, these are activated and deactivated with a check box. When I add these properties to my form, I have the ability to open a calendar but I have no way of knowing if the date is activate or not.
I saw in another post, that a ticket was opened to added the material selection to the options in forms. Could this functionality be added as well?
I have a macro to change the thumbnails of a part, but my parts have not always the "Master view" active.
How can I activate a view by code? Get control of your sheet metal files at [URL]
I have created a new form using three fields, to show quantities, job no etc. and was wondering what code I need to use to be able to push enter after filling out a field and then jumping to the next field?
View 4 Replies View RelatedJust started the rendering tutorials. Opened a iam file but could not activate the rendering icon to access inventor studio. Tried several iam drawings even created a simple one. how to get this feature to work?
View 5 Replies View RelatedIm working on a program that checks out syncronizes some data with our erp system and then checkes in the files again to vault. all works fine but in vault all links to other files are gone? when i checkin the files from inventor manuel then the links are ok in vault. therefore i wonder if it is possible to run the vault checkin dialog "hidden" and just pass in some predifined options and checkin to vault.
View 8 Replies View RelatedI'm running Map 2014 SP1 on my machine and the rest of the users in our organization are running Map 2013.
If I save a drawing back to a dwg 2010 version all is fine, but if I save the same drawing to a dwg 2013 version other users are not able to activate and query from it, even though they are otherwise still able to open and work with the drawing.
After reimage of hard drive, install fail to Activate. Too late to get old drive information, need a way to activate after failing to export.
View 6 Replies View RelatedThe Online menus are grayed out on my installation of Autocad LT 2013 . How do I activate these ??
View 9 Replies View RelatedI'd want to have a way to activate or deactivate a surface ,
View 9 Replies View RelatedHow to activate or disactivate this icon (the one with two arrows): I think it has a relation with large surface visualization.
View 2 Replies View RelatedIs there anyway to use the break-out command in an IDW to show something inside an enclosure that you normally would not see? I don't mean a section view but an Isometric view that temporarily removes a part of the wall of an enclosure so you can see what is inside, specifically in a presentation view?
View 5 Replies View RelatedI am doing the Inventor 2014 tutorials. In the examine, treat, and solidify the stand tutorial it says to Click the STITCH command, which I did. It then says to click the BODY selection option. There is no Body selection option in the STITCH dialog box.
View 5 Replies View RelatedI am having a problem with a sketch not updating the parameters when using a "while / end while" command.
Basically if you have a right angled triangle (as attached) with one side and the angle doing the driving then I wish to update the sketch until the last side which is a reference dimension reaches a preset dimension.
I cannot get the updated sketch to read back into the while command to stop when the limit is reached. Instead it goes on an infinite loop until the sketch breaks.
I have used every update under the sun and can get nothing to work.
Trigonometry not an option as this is a basic example of what I wish to achive.
I have seen an example of this working but only for reading the iproperties so dimensions can change until a volume is reached.
I want a part automatically to be "saved as" in my workspace.
there is the command
ThisDoc.Document.SaveAs(NewFileNameAndExtension , True)
in the browser of iLogic but I don't know how to use it.
I tried ThisDoc.Document.SaveAs("partname.iam", True)
but that's couases a error.
Having never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View RelatedI have a funnel with a curved top. I'm trying to project an inset of the border onto the curved surface and use the shell command to create a hollow funnel with an overhanging lip. I have projected the inset successfully, but cannot select the resulting smaller face, just the whole original face.
A similar problem that I tried while attempting to figure this out was shelling a sphere. 2d sketch -> 3d sketch project onto surface, and try applying shell to the resulting "face". However I can only select the whole face when trying to shell.
(see attached)
I have what seems like an odd, but needed request here. I have an engineer that is looking for a way to measure between two lines that are not co-planar, but he wants the measurement in a specific plane.
Basically he wants to be able to select a plane or line, then be able to select the second plane or line and have the tool automatically "project" it to the plane of the first selection and give the angle in that plane.
Ref the attached - the purple lines are in the XY plane, the blue line is not, but he wants to measure the angle from the X axis to that line but in the XY plane as seen by the green line that was manually projected to that plane.
Without having to manually create a sketch and project the entities that need to be measured (this example is an extremely simplistic one), how can this be done? Measurements in this way need to be done in numerous complex angles.
He's claiming Catia, Pro/E and of course, SW can all do this "project" within the measure tool. I figured if that's indeed the case, Inventor sure be able to.....JD, you're the resident expert on SW & Inventor....do you know what I'm referring to?
I am following the U-Tube exercise called "Emergency Light (Cabinet) volume 1". I am at time stamp 1 hour 26 minutes, exactly.
In the video they use a Loft command in order to cut a shape out of two sketches numbered 10 & 11. I have been copying exactly and am having difficulty at this stage of the model.
Is there any reason why I am managing to use the Loft command earlier perfectly but not at this point.
is there any possibility to use inventor commands like "AppContextual_ContinueCmd" in addin? I need to add to RadialMarkingMenu commands for continue or cancel during selection.
private void UIEvents_OnRadialMarkingMenu(Inventor.ObjectsEnumerator toEntities, Inventor.SelectionDeviceEnum toSelDevice, Inventor.RadialMarkingMenu toRadialMenu, Inventor.NameValueMap toAddInfo) { if (toSelDevice == Inventor.SelectionDeviceEnum.kGraphicsWindowSelection) { toRadialMenu.EastControl = this.oApp.CommandManager.ControlDefinitions["AppContextual_CancelCmd"]; toRadialMenu.WestControl = this.oApp.CommandManager.ControlDefinitions["AppContextual_ContinueCmd"]; } }
The menu is correctly shown , command " AppContextual_CancelCmd" send Esc to events,
How to catch "AppContextual_ContinueCmd". is this possible?
I am wondering how many times you can use split command on one part?
I have never used split command before.
if you look at the image below, i would like to split this into 4 pieces, and looking for the quickest and the way that makes the most sense way to do it.
I have looked at all the discussions relevant to this problem and can't find an answer. I am doing the TOOLING TUTORIALS for Inventor 2014. My O/S is Windows 7, and my Graphics card is a Gforce GTX 570, so I know my equipment is up to doing these tutorials. But, every time I click OK to start the pattern in the section "Patterning Mold Assembly Components", I get a message saying "Pattern (not responding)". I have tried and retried at least a dozen times to be sure I followed all instructions to the letter.
View 4 Replies View RelatedIt could be interesting to activate a layer filter from a combobox (I'd like to have this combo into the layers panel) in order to have fast access to the layers beginning to this filter.
View 3 Replies View RelatedMy sculpt command seems to be temperamental. I've created some surfaces using the revolve command and now want to sculpt using those surfaces. It won't show me a preview of the section to be removed and as I keep trying I get bumped out of inventor (fatal error). The other strange part to this is that i t worked once before on one side of the part and not the other. And now that I try again on the part that worked; it won't work any more. ?
(Using R2010 service package 0)
For some reason when I start up Inventor 2014 it is preset to the centerpoint command. How do I change this to where it will not automatically do this?
View 2 Replies View RelatedI want to automate the check in of design files to Vault on each PC, prior to running workspace sync (Vault) which does have command line support.
I know you can schedule tasks within the Inventor Task scheduler, but has task scheduled the Inventor Task Scheduler? I suppose in theory you could schedule the launch of Inventor Task scheduler via the Windows one? or is there any need? If the Inventor Task scheduler isn't running, but a task has been scheduled, will it execute the program itself?