Just wanted to run this by everyone. I'm using Autocad 2012 and having problems with text dropping out when i create a PDF file from my DWG.
It just happens randomly. Most times we just re-PDF the dwg and it's fine. I'm wondering if the way I go about it, /plot, and using "Adobe PDF" to print my PDF is what everyone is using.
Iv'e been using Land Desktop 2005 and 'am checking out a trial of 3D 2012. Needless to say I'm used to the 2005 format where there is simply a tab for Projects to create a new project or manage existing projects.
Having issues on a laptop with Inventor 2012. Inventor will let the user create a new project folder on the C drive but not on their personal network drive. The user does have all needed permissions to use their network space, but Inventor is not allowing a project folder to be created on on the networked drive.
We have desktops on which project folders can be successfully created on the network drive. Only the laptop seems to be affected by the issue.
Am I missing a simple check box somewhere in Inventor?
I have been searching around all morning for a way to create a symbol legend in C3D 2012. Is there a way to create a legend of point sysmbols being used with in a dwg? I could do this manually but that could take a while if I have lots of sysmbols.
I have recently installed Inventor Professional 2012 Student Version, and I'm unable to create a new file, as the program crashes as I try to do so.
After starting Inventor, I select New than Standard.ipt. The file starts loading, the status of the loading process can be seen in the bottom left corner, than the "Open Documets in Session" counter in the bottom right corner changes from 0 to 1, as it should, I guess. And than, the program freezes. Sometimes, a message appears after several minutes that an error has occured, and that I should send an error report to Autodesk (which I did); but sometimes, no message appears at all, it simply crashes.
My computer specs are: Intel Core 2 @1,86 GHz, 2 GB RAM, NVidia GeForce 9800 GTX, 60 GB free space, Windows Vista (hotfix installed) Not a powerhouse, but I think it should be able to start a file properly I think, if I understand the system requirements correctly.
I'm detailing a simple square plate with a good number of holes in it. I create an ordiate set running vertically along the LH edge and select the holes that are close to that side. Origin is the lower LH corner. Works great, easy.
The holes that are closer to the RH side though I'd like to show on that side. So I go to create a second ordinate set for the RH side and choose the lower RH corner as the origin and choose my holes that are close to that edge. The 2nd set will automatically show a second "0.000" dimension on the bottom edge and I can't supress it by right clicking.
Is there a better way to do this? What I've done now is to not use a set but just choose ordinate dimension and go from the opposite edge, which works.... But alignment is better with a set.
Below is my test procedure for "Create Curve Mesh Element" by Inventor simulation 2012.
1. I made a box 100(W)X100(D)X20(H) with 2xR20 (mm) fillets at the opposite edges.
2. I copied a box I made for making 2 type mesh.
3. I made mesh on the box without "Create Curved Mesh Elements" option.
Node number: 2374 Element number: 1365
4. I made mesh another model with "Create Curved Mesh Elements" option.
Node number: 2374 (same number, not increase) Element number: 1365
Mesh shape is different(please refere attachiment jpeg file).
I think that "Create Curved Mesh Element option" is not for making second tetrahedron elements.But I cnanot the true porpose of "Create Curved Mesh Elements" option.For only P method, not H method?
WHen I create a roof on level two of my project, I get only two choices of roof. When I go to roof edit, I get system family basic roof, and glazed panel. No other roof families to load.
I simply want to attach a shed roof to the upper part of wall (at level 2), and it only allows me to create a hip roof.I can't seem to modify it, other than to change roof slope. I've looked at a couple of videos, but the featuers in the videos don't seem to be there.
Note that the walls are sloping (in order to shed rain). I also cannot create a slope on the top edge of the wall in elevation view, but that's another story.How to I modify the hip roof to create a flat, if that's what I must do?
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3 10.6.7 Kona 3G driver 10.3.2 Quadro 4000 driver 256.01.00f03 Cuda driver 4.2.10 Mac Pro (mid 2010) 12 Cores / 24 Gigs CalDigit HD Pro2 (8TB, 723 MB/sec read)
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
When I "move a dimension with Leader" is there a way to create an arrowhead on the create3d leader. After I create a Linear Dimension I select it and hover over the blue box in the dimension text and select 'Move with Leader" and the leader does not have an arrowhead. Is there an easy way to do this? Autocad 2012.
I am using ACAD MEP 2012. While i was working on a drawing my AutoCAD session locked up and terminated the program, not thinking anything of it i just restarted ACAD and started working on the same drawing. I noticed the ribbon looks different and now all the command buttons are not showing up under the tabs they are ALL in dropdown windows now. I don't know what happened to the original ribbon setup but it is definitely not what it used to be. Attached below are pics of what i am referring to. The first picture is what it used to look like, the second and third pictures are what they look like now.
I am attempting to mirror an object, using an endpoint but 6.5 units to the right of it. However, i don't seem able to do it, as when i mirror the objects they just end up touching.
I know the 2012 version doesn't have dialog boxes for features such as hatching and the array commands, it is possible to set it up on this version so these options become available.
I have installed Autocad 2012 LT on Windows XP sp3. The program opened and worked fine after the install. The user was not sure they wanted this version so I did not activate the program right away. After the user decided they wanted to keep this version I activated the program with a license and now the program will not open. Crashes and does not give an error message.
I have tried to uninstall and re-install. I uninstalled netframework 3.5 sp1 and re-installed, still will not open.
I have Inventor 2012 running on WIn7, 64-bit system. As i want to use also MDT2009, i´ve downloaded it from the autodesk server and followed the instructions from the site. Now im not able to install MDT. When trying to install it, it says the installation can´t find inventor on the system. Its definitly present on the system and i don´t know how to go on.
I've tried to measure the area of a road layout (that includes curves) and it is giving me a completely unrealistic answer (310,000m2 instead of 41,000m2). If I de-curve the lines, the area is about right, but the lines MUST remain curved for me to get the most accurate measurment. why curves aren't being measured properly, and is there a setting I can use to make sure this doesn't happen again?
I have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..