I've rebooted, re-installed and nothing changes the fact that when i try and insert a raster image the program locks right up.
I can go back 2009 version and have no problems inserting the same raster. The raster is a Mr.Sid format file
I just installed 2012 with the Inventor pro suite. when I tried to open multiple dwg's it locked up on certain dwg's and I got the error " no cavas click on new canvas". I read an existing post that said
"I went into the CUI, current workspace, removed the Sketchbook Designer from showing in the Ribbon"
I could not find this in my cui current workspace and is this the best solution?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
We frequently create PDF files using the DWGtoPDF.pc3 . We have a lot of drawings with a raster background image. In version 2010 I could create a PDF and the raster image would show up. We recently upgraded to Map 3D 2012 and although the raster shows up in the preview, it does NOT get plotted to the PDF.
View 9 Replies View RelatedI have successfully draped an orthophoto over a DEM in Map3D but the resulting quality of the the image is so poor it is unusable. I have attached a couple screen shots of the 2D and resulting 3D images. Is the resolution in 3D dependent on the 'resolution' of the DEM? The orthophoto is 10cm resolution.
I have tried REGEN and to Resample Raster but I haven't had any luck.
I am facing the following problem in Autocad 2012:
I have set all the drawings I want to print in the Sheet Set Manager and I publish everything to plotter for unattended plotting. However, when publishing the same drawings to PDF using the SSM, all raster images do no print. If I open each drawing and plot the same layout on its own, everything prints just fine. So I think there is something wrong when publishing through the SSM.
The funny thing is that before using Autocad 2012 I was using version 2010 and everything worked as expected, the raster images were printed no matter where I was printing from.
I am working on a project that requires a number of raster images to be compiled in a base file and then x-ref'ed into titleblock sheets. The base file is not giving me any problems but the files it is x-ref'ed into keep giving me fatal errors and shutting down AutoCAD. I am working in 2012 LT. I was able to find a HotFix for this problem for 2008 but have not been able to find a fix for my version.
View 2 Replies View RelatedAfter installing Update 2.1 for Civil 3D, Raster doesn't seem to be working. When I go to use a Raster function, I get
FATAL ERROR: Unhandled Access Violation Reading 0x01b8 Exception at 6e545df5h.
I've tried repairing and re-installing Raster and nothing has changed.
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
well i have a problem on solving an autoCAD homework . i have a pdf with the contours of the altitude of an area and i have to rasterize it as an image in AutoCAD 2006 (i put it on windows paint , then i save it as an img (jpg) ) and then i inserted it in AutoCAD. I have to georeference that image and to fix its scale. How can i do that ?
View 1 Replies View RelatedI have a problem about drawing CAD.
I want to draw a ellipse with the mouse trajectory,just like draw Raster Image.Then Calculate the ellipse parameters and get a Data Base Object ellipse to add in!
How can I make a raster image transparent? I would like to see image #2 below image #1 by making image #1 semi-transparent. I can make one specific color in the image transparent..I am working from a scanned image in jpeg format. I would think it should be easy because any Microsoft Office program can do it. I have searched through multiple Autodesk discussion boards to no avail.
View 9 Replies View RelatedWhat is Raster Scan? Why Manual Hard Copy drawings to be converted to Raster Scan Images and what is the Benefits of Raster Scan Images.
View 6 Replies View RelatedOn OSX Lion. Just installed the Creative Suite (paid subscription).
I can launch Photoshop just fine, but when I open any image it locks indefinitely once I go to edit it. I've left it sitting for hours with no luck.
What's happening?
We have a map created for our city with all our utilites, zoning, etc. plotted out and we have some very old aerial imagery attached to it.
Just a few months ago, Pictometry flew some new hi-res imagery for me. I have individual ortho tiles and one large ortho-mosaic. When I try to install the imagery, it doesn't line up anywhere close to where it should be on the map. How can I go about getting my imagery and my map lined up?
I have a problem with a drawing, containing aerial images.
If I try to plot it as PDF, using "Adobe PDF" or "PDF-Creator" as printer, I see green areas in my PDF. Here the result:
If I use the AutoCAD Printer "DWG to PDF.pc3", there is no problem. Here the result:
For the creating of PDF files I can use the AutoCAD printer, that is no problem, but I have the same Problem if i try to plot a drawing with aerial images on a Plotter (HP 1050C) or any other printer in our office.
I'm having an issue where the more I zoom into a drawing that has a raster image (a 1mb jpg) in it, regenerating times become increasingly long until the whole program just freezes. When I zoom back out, it's fine.
I've tried changing the file type, saving it with a different program, lowering the quality to Draft, zooming in on an area that the raster image wasn't in, lowering the DPI of the image, nothing works. I've spent the last two hours searching Google for a fix, found nothing. The only thing that seems to work is if I put the image on a layer and freeze it. The problem there is, I'm tracing over the image, so it being invisible makes it rather difficult to work with.
I'm still learning some of the basics in the AutoCAD Map features. Most of my work has been using a map that is connected to data. My raster image is connected to a Sid file which covers more area than I usually need to work with.
What is the best way to work with a small area at a time? I cannot seem to imageclip the connected raster image.
I have a small raster image (png) xrefed to an Autocad 2012 dwg. The image is on its own layer and the transparency of the layer is set to 60%.
When I select TPY the image displays correctly on the screen (i.e. semi-transparent). When I tick Plot transparency in the Plot dialog box and send the plot to our HP Designjet 800 the raster image prints exactly as I want (semi-transparent).
However when I use the Autodesk pdf writer (Dwg to pdf) the resulting pdf does not have the semi transparent appearance and the raster image appears in all its brilliant color even though it displays correctly (i.e. semi-transparent) in Print Preview. And, yes, I have ticked the Plot transparency box before seeing it to the pdf writer. Other autocad entities such as plines which are semi transparent are fine, its only the raster image that seems to lose its semi-transparent quality.
Is there anyway to bind a raster image to a drawing?
Everytime I bind/insert my title block the images dont bind in and also the file paths get deleted. Asked most of the drafters I know and everyone says it cant be done, which is what i think.
Normally I would use a CAD version of the Logos (for the client/architect,etc.) but sometime there isnt one available so have to use raster images.
Running AutoCAD 2004, XP Pro...I have inserted our company logo into the title block as a Raster image. The logo is png, and I have tried retaining the path and not retaining the path with the same result. After saving this as a template, I reopen as new sheet to start a drawing and the logo is now the path name.
View 1 Replies View RelatedI am having some problem with plotting Raster image.
From time to time I need to use raster image as a background such as the example in the attachment. Here you can see that the raster image is only plotting half of the image.
Is there any Functionality available for Reloading the PDF or Image like we have for DWGs (Database.ReloadXrefs).
View 2 Replies View RelatedAutoCAD2008
In doing some more research on my "reference question" below, I found that the scanner we have at work creates a tiff image and apparently there are different types of tiffs. Our scanner creates a tiff with a "bitonal" color setting. How to convert a tiff with a "RGB" color setting to a tiff with a "bitonal" color setting. I have done some searches but have come up with very little information about the subject. I would prefer to be able to do this with autocad software if it can be done.
AutoCAD 2010
Is there a way to change a pdf underlay path when drawing files are moved?
Is there a way to set the pdf path to match the drawing location so when a drawing?
and pdf is moved and they have the same path the pdf will be linked to the drawing?
The same can be asked about raster image files & AutoCAD?
Is there a way to set the raster image file to match the drawing location so when a drawing and rastor image is moved and they have the same path the raster image will be linked to the drawing?
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
View 2 Replies View RelatedIf I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies View RelatedI'm using C3D 2013 on a 64 bit windows 7 machine. I have basejump loaded, and when I first installed it there would be a "Raster" tab in the ribbon that would allow me to resample, etc. That tab is now gone. How to get it back?
I used to click on a point to select it and a new tab would show up in the ribbon to list points, edit points, etc. That doesn't come up anymore either.
I have a a graphic image from a client to use as signage on my 3d model. In photoshop I have isolated the letters and the logo only by erasing the background. No color is in the background, not white nor black, it is transparent in Photoshop.
I saved the image as a .jpg, .tif .tga. and .bmp. Any of these raster images, when inserted into the drawing, shows the background as white. I cannot undertsand how to make it transparent so it looks like letters painted on the wall.
I have changed IMAGEFRAME set to 0 - no change, I have set properties TRANSPARENCY to YES but no change.
Am I missing a step, or does the program always show raster images in a box?
ACA 2009
Here's the Code I have so far:
I want to iterate through the Image Dictionary and Connect into the Raster ImageDef Properties.
I want to be able to modify and fix missing Raster Images.
How to get this code sorted out.
For Each myObjID As ObjectId In myModelSpace
Dim myEnt As Entity = myObjID.GetObject(OpenMode.ForRead)
If TypeOf myEnt Is Image Then Dim myRasterImg As RasterImage
Dim myRasterImgDef As RasterImageDef 'Open The Dictionary
Dim ImgDict As ObjectId = RasterImageDef.GetImageDictionary(DatabaseIn)
For Each dictEntry In ImgDict NextEnd If
I am using a tiff file as a Raster Image Reference while drawing over it in AutoCad LT for mac. The raster file is 8200 x 5700. If I examine the autocad drawing by zooming in closely the alignment is perfect. However, when I create an A0 pdf file of the drawing there is an alignment error between the raster image and the vector drawing on the x axis. The y axis alignment is perfect.
I believe it is a scaling error since there is no visible alignment error on the left hand side of the drawing and the error increases across the drawing to the right hand side. The error is small, about 0.2% but it is clearly visible in the pdf file.
To illustrate the problem I have put a test mark on the top right hand corner of the drawing outline and the attached file shows this portion of the drawing in autocad on the left and in the pdf file on the right.
I have tried different drivers and plot settings but the error is always there.
I am using MAP3D 2013 and trying to create a raster image file for use in anther document (the document will not accept a dwg or dwf file, only a raster image).
When I use the JPGOUT (or PNGOUT or BMPOUT or TIFOUT) command I can select all of the objects and viewport; there is no problem creating the file. But when I open up the raster image, only the viewport outline and objects in paperspace have come accross; the viewport appears empty.
In MAP, the viewport is turned on and I can see everything as intended.
