AutoCAD LT :: Sata Controller Card Causing Activation
Jul 1, 2013
AutoCAD 2009 LT
windows 7 Pro, 64 bit
Vantec 6 port Sata ii 150 PCI Host card w/ raid
Crucial 128gb SSD hard drive
I'm not running the system in RAID.
I'm having issues with a Sata card I installed on one machine. It's losing a hard drive from time to time and I have to unplug the Sata cables and plug them back in so the computer will boot up and function like normal. The only problem is that it casues an activation issue with AutoCAD. Now I've reached the reactivation limit for CAD.
Can I manually enter something into the registry to correct the activation issue? All drivers are up to date and I've reinstalled the driver for the controller card.
View 3 Replies
ADVERTISEMENT
Oct 11, 2013
When I open a file on Inventor 2014, the screen says, that the graphic card controller crashes, after that, there´s no possibility to recover the work, because the work zone, shows a infinite white space.
This is the print screen (in spanish); translation will be like: "Screen controller stop working but it recover itself (something like that)"
View 6 Replies
View Related
Apr 12, 2012
For a while now, I've been trying to shell a split game controller that will create the bottom part of the casing. However, every time I try to shell, a problem occurs "Modelling failure in ASM. Redefine inputs".
I've tried to find the source of the problem through supressing features, and when it finally does shell, the casing creates another problem that will not allow me to loft to get the proper appearance.
View 2 Replies
View Related
Jan 11, 2012
If there is anyway to control a waveform controller to only turn on for a certain amount of frames?
View 4 Replies
View Related
Jun 20, 2013
Recently, with the release of the next gen consoles, I decided as a challenge to myself to try to recreate the Xbox One controller in photoshop
Here is what i have done until now.
Here is the exact image I am trying to recreate. URL...
Now the thing that I don't know how to do correctly are two things:The first being how to make the bumps around the two joysticks And second, the general lighting on the controller.
Also, ignore the 2 buttons in the middle and the gray part where the logo sits (not finished work)
View 4 Replies
View Related
Oct 21, 2012
I'm working on a controller for a face rig, but instead of using morphers I'm using different textures for the mouth depending on the action. I've set these up in nested mix maps (there are 8 different textures in all). For my test I'm using 4 and standard primitives to simplify things a bit.
I initially setup these controls in an attribute holder containing 3 sliders. The main one is a master switch slider. The other two act as the mix map sliders within the texture nest of mix maps. I'd like to create a single control for these though.
I can pseudocode this out pretty easily but applying it is a different story. What is the best course of action? I'm not very familiar with Maxscript although I am planning on looking into it.
View 2 Replies
View Related
Apr 4, 2013
Is there a way to have one node which controls say the intensity of selected lights within my scene?
View 3 Replies
View Related
Aug 1, 2011
I want to make a controller that can change an object from green to red. So I wire the parameters from y position to the ambient colour.
I find to make the y_position into (y_position/100),(y_position/100),(y_position/100) but when I put this into the Parameter wiring dialogue I get a syntax error.
View 3 Replies
View Related
Jan 3, 2012
How or have a script to bake Audio Controller animation to frames so its position/rotation can be adjusted by i.e the Curve Editor in 3ds Max?
I have an spline object where I use the Audio Controller to drive the height of the extrusion dynamically over time but would love to have more control over it.
View 1 Replies
View Related
Aug 5, 2013
I have a CSV file with lists of positions and rotation angles (over time). I would like to use these to animate objects. The two options I've found thus far are:
- Convert the CSV to the XAF format and import this into the curve editor
- Convert the CSV to WAV and use the AudioFloat controller to assign it to the coordinates
I would think there should be an easier way, preferably one for a controller, but I can't seem to find it. Surely I'm not the first to want to import data; frankly I'm surprised that audio is supported but regular data isn't. The thing is, converting the data to XAF seems to produce an enormous overhead and converting it to WAV is just odd.
What would the appropriate way be? Ideally I'd expect some controller where I can specify a file and some conversion parameters and that'd be it. Does such a thing exist? I'm happy to convert the CSV but I feel like it's probably not necessary - is it?
View 2 Replies
View Related
Mar 12, 2013
i've got a seemingly empty scene, everything has been deleted, still max reports a missing reference to a xref controller somewhere, backburner will not accept net submission.
i've looked everywhere i can think of and the only place i can find a reference to the hidden xref controller is in the asset manager where it lists a file in the xref tree - how on earth do i get rid of this file? there is nothing present in the xref dialog for deleting or anywhere else i can think of.
View 3 Replies
View Related
Oct 28, 2011
I have been annoyed with trying to create a theme and controller image to use with Xpadder.
Rules: Controller image and theme must be made to fit together and must be created the same size as the images belowthey must be seperate pictures and the buttons should have places to go.
This probably means very little sense to you if you dont have xpadder, and possibly learn a little bit more about xpadder in order to make the theme and controller image. Also xpadder does not support transparency.The template for a theme and an image of my controller (it has four trigger buttons, 2 on each side)
View 1 Replies
View Related
Jun 29, 2012
I made a simple image explanation.
1. I have an ARROW that I would only like to animate along the Local X position.
2. I have a helper that i would like to control the rotation of the ARROW.
3. Once i rotate the helper, i would like the ARROW to still go in the Local X position but in the direction its facing.
Does this require a script or can this be achieved another way?
View 9 Replies
View Related
Feb 24, 2011
"Scripting" a "simple" rigging function.
Gear1 is rotating on z axis (both sides), Gear2 is linked to G1, but only in positive (or negative, I don't remember).
I want to assign a controller on gear2.Z Rotation (script or expression), something like that :
if G1.Z Rotation=positive then G2.Z Rotation=G1.Z Rotation else 0
or
if G1.Z Rotation=negative then G2.Z Rotation=G1.Z Rotation else 0
I need to setup a 80 moving parts watch, so I need to use "Assign Controller" function.
View 3 Replies
View Related
Nov 30, 2013
So im using 3ds max to create a controller that hold more than 1 hand pose: fist, relaxed, stretched, etc. But when i making my 2nd pose and placing the same axis as the first pose, it overwrites it. So like this i can only use the 2nd one, instead of both.
View 7 Replies
View Related
Jan 11, 2013
I'm currently working on a job in a team where we'll be working on different drawings, yet have the other drawings x-referenced into our drawings to keep up with updated files. We've had no issues with this for the few months we've been doing this, until overnight one night this week it seemed everything changed.
I'm currently updating our elevations while my partner is updating the plans. I have those plans x-referenced into my elevation drawings. The issue that we've run into is simply that any time I have my elevations or any drawing open that contains an x-reference, the file that is being referenced won't open without stating "[that file] is currently in use by [other user]. Would you like to open the file read-only?"
I've seen this alert before and it's understandable when dealing with the actual file (one person opens a file another already has open), but I've never before had this alert stem from the file in question being an xref. I closed my elevations and then opened the plans with no problem...no alert stating they were in use by someone else.
We're using AutoCAD Architecture 2013.
View 2 Replies
View Related
Feb 27, 2013
I have try every solution on the autodesk page about the blank activation page problem and it is still not working for me... I have instal autocad and uninstal it multiple time and I always get the error 2738 (probably related) the program is working fine on the trial but it will expired soon. What does the error 2738 mean?
View 1 Replies
View Related
Apr 28, 2010
My computer would crash and reboot. I downloaded and installed the partner certified driver for my video card. (nvidia quadro fx 3450/4000 sdi) This solved the crashing problem, but now every time I open inventor i receive an ilogic activation error. I have reset my ribbon and that did not work.
View 2 Replies
View Related
Mar 20, 2012
i install my AutoCAD 2012 into my new computer, but after i install it get only 30 days remaining. then i try to put the activation code to activate and it keep getting that the activation code it not correct. i try to request a new activation code but no reply.
note: before i install my autocad 2012 into new computer i uninstall it in my previous computer.
View 2 Replies
View Related
Nov 28, 2011
I try to wire the length parameter of a taper object to the local Y-Position values of another object. It works fine until I reload the file. I get an MAXScript Wire Controller Exception error:
--Runtime error: Illegal self-reference in controller script
...and the parameter-wire dialog opens. The desired functionality returns by clicking the Update Button and everything works fine again.
View 1 Replies
View Related
Oct 18, 2011
what could be causing all of my add-ins to spontaneously unload themselves? For the second time in a week, I opened Inventor to have all of my add ins unloaded, and the "Load at Startup" and "Loaded/Unloaded" checkboxes are unchecked. I am not doing this and I am the only user on this machine. System stats and version below.
[URL]
View 4 Replies
View Related
Apr 21, 2013
I am trying to activate my free student version of autocad architecture 2013, and the serial number I am provided on the first activation screen is invalid on the next page.
View 1 Replies
View Related
Jun 18, 2012
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies
View Related
Jul 9, 2012
The issue I have with Inventor 2010 is when i dimension a rectangle to be 44 in wide and 79 in height it becomes a slated rectangle. This event occurs on the work version of Inventor 2010. I have an educational version of Inventor 2010 at home and when I tried this same dimension rectangle at home it didn't have this issue. Is there a setting I need to turn off to fix this.
View 1 Replies
View Related
Apr 22, 2009
I'm creating a macro to run on creation of a new assembly from a particular template. I created a macro named autonew in the template's VBA project file. It works great except for one thing: if the user presses "Cancel" on my form, I want to not only unload the form but also close the file. For this case I've used:
ThisApplication.ActiveDocument.Close True
I've created a test template assembly with only this line in autonew, and it crashes Inventor. The same line of code an a non-autonew module within the template file's VBA project closes the document without error or crashing. I assume this is a bug and not as designed.
Is this a bad way to accomplish the task of closing a newly created assembly? Even if this isn't the preferred approach, I don't think this should cause a crash.
I'm running Inventor 2009 SP1.
I'm running 64 bit on XP64
View 5 Replies
View Related
Aug 28, 2013
I want to know if it is possible to creat a script that will rotate the cam wheel show at the pivot point, while causing the rectangle to oscillate up and down in cadence with the ppoint of the whell that is contacting it.
I have a simple script that rotates the cam wheel, but every time I run it, AC crashes. I am on Windows 7 Ultimate 64bit and I have installed the latest service pack. Here is the script:
rotate
g
1
45.5447,44.7299
1
rscript
I'm not sure what other information you may need to diagnose this, so just let me know. There is no error message given, it just freezes up.
View 3 Replies
View Related
Dec 10, 2013
We are having a problem with blocks not appearing after xreferencing a drawing. We can place blocks as normal from the tool palette, but as soon as we xreference a 2D site plan and select blocks from the tool palette, they will not place. You can see them when placing, but once you click to place it, the block does not appear. I have copied out the site plan to a new dwg file, still does the same thing. Everything has been purged and ran an audit in the plan drawing and also the site plan drawing. The block does not show up in the block editor either. I am trying to avoid redrawing the site plan like we had done with two models that were doing the same thing. Remodeling a vessel and rebuilding a skid composite corrected the problem with two other drawings, but redrawing this site plan would take considerable time.
View 9 Replies
View Related
Jan 4, 2013
We have a work station with C3D 2013 that has started crashing when trying to open the pipe network vista. We have to edit the pipes using pipe properties for the individual pipes. This makes it difficult when trying to edit a large network. The drawings work fine on other computers. It has something to do with the settings on this machine. What would be causing the crash when trying to open the vista window?
View 5 Replies
View Related
May 30, 2012
Whenever I insert a title block I get an "AutoCAD Error Aborting" message - FATAL ERROR: Unhandled Access Violation Reading 0x0040 Exception at d69ac126h.
The title blocks have been working fine for months in ACAD2012, and I've even tried saving the drawing containing the blocks as an AutoCAD 2013 dwg to no effect.
The title blocks are 'home-made' and contain a mix of fields and attributes, could this be causing the problem?
View 7 Replies
View Related
Jun 1, 2012
Having problem with a particular file crash/freeze/not respond whenever using the shell feature on Inventor LT 2013? I am operating with Windows 7. I have the AutoCAD Inventor LT 2013 Suite. Just bought the computer two weeks ago and just installed Inventor about two weeks ago also.
In any case, it seems the file of this model is corrupted, as I have never had a problem using the Shell feature before this and shelling other objects even while the corrupted part is open works fine. However, if the "visibilty" of the part in question is checked and i click on the shell button, the program immediately freezes. I am not sure how to work around this and I really do not want to start the entire part modeling over from scratch.
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
View 9 Replies
View Related
Jun 19, 2013
I'm currently using AutoCad 2013 on a Lenovo Thinkpad X230 with windows 7 64 bit. I have 8 gb of ram and a core I7 processor which seem up to the task for the rather small files I create. My issue is that whenever I initiate the mtext command or attempt to edit an mtext object, my cpu usage will jump from about 0 to 4% up to 20 to 30% and will stay at that level until I close the drawing. This causes the fans to run constantly and makes working a little more jumpy. I've tried removing AutoCad completely and reinstlling. I've tried loading up AutoCAd 2014 (and subsequently removing it) and now I'm back to AutoCad 2013 and the problem persists.
I'm assuming it has something to do with the computer or some other software that is running in the background. It's odd that it would only affect this one command. The computer is only 1 month old and I've done the hardware checks that Lenovo offers (no problems indicated).
View 2 Replies
View Related
