i install my AutoCAD 2012 into my new computer, but after i install it get only 30 days remaining. then i try to put the activation code to activate and it keep getting that the activation code it not correct. i try to request a new activation code but no reply.
note: before i install my autocad 2012 into new computer i uninstall it in my previous computer.
CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?
View 5 Replies View Relatedcorrect font style from 1071 group code in style table of dxf file ? I am able to read the Font name and font file name from group 1000 and 3 respectively, but not able to get the font style: whether it is Regular, Bold, Italic etc.
I know i have to decode the long values in 1071 group codes like: 50331682, 50372882 etc. But dont know how to arrive the Regular, Bold, Italic etc Font Style. How to decode this value ?
The requirement of above information to me is that i am making a Graphics viewer for a specific purpose which reads and displays Graphical Entities from DXF (ascii) file.
I cannot get the correct code from Facebook to link to LR4. The publish manager displays the plug is installed and running, but then when I try to publish, I get a message from Internet Explorer and Firefox it does not know what to do with each particular protocol.
View 5 Replies View RelatedI have a touchscreen project that I am using Edge Animate to create. So far its working great, but I am trying to find the correct code to make an Idle Timeout after 3 minutes to go back to the stage frame 1 or the label "StageStart" that I have created. I have tried attaching the following code as a 3 second test to the function "touchend", but it doesn't seem to work:
Â
setTimeout(function(){sym.play("StageStart")},3000);
 I have this drawing will all hatches, the red hatch in the middle is the same hatch around it, ANSI34, with scale of 120. just because the boundary is too small it show as SOLID.
View 1 Replies View RelatedI'm using ACADLT 2012;
I can't see the means by which I can plot proper lineweights to my laserjet. And when I try to plot to pdf file I get the line colors instead of a weighted line.
How do I set up my drawing for correct monchromatic lineweights ?
I recently switched from LDD to Civil 3D 2010 and have since had problems with the command line recognizing Alt Codes when entering leader text. After the leader command is finalized, I am able to edit the MTEXT which does recognize the alt codes. Â I use alt codes for various symbols and now have to edit leader MTEXT each time in order for the symbols to be recognized. Â Is there a toggle or some other setting in later versions of AutoCAD that would allow recognition of alt codes at the command line?
View 2 Replies View RelatedI am upgrading the AutoCAD 2009 X 32 systems to the 2013 X64, and I have this vab code that won't work on the new system. I try to move the search path that contain the file up to the top and also got all the missing libraries, but the code still won't work.When I run the code it will give me error message like: compile error:
Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic. The code work perfectly without any error on the old system so I sure the code is causing this error.
Publish comment doesn't work correct. Even if I set multi-sheet file and prompt for name, autocad doesn't ask me about file name and makes single sheet files.
View 9 Replies View RelatedHow to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
create a G-code from an AutoCAD desktop 3D model of a 1911 pistal grip saved as a DXF file. I have a CNC 6040 3 axis routing machine. I have tried to load the DXF file as an import but the file is not recognized by the Mach3 software.
I have downloaded a lisp comand for my AutoiCAD program which is supposed to generate a G-code within Autocad but It doesnt recongnized some 3D elements. I am having a dificult time getting the generater to read a "mesh" 3D form to generate a G-code. I hope this doesnt sound all too confusing... the bottom line is I cant seem to get a G-code out of a 3D CADÂ form....way to generate smoothly a G-code from an AutoCAD 3D form?
I have code that works just fine in AutoCad 2010 (just plain ol' AutoCad), but will not run completely in AutoCad Mechanical 2012. The code will draw lines, arcs, circle, plines, etc. as well as insert blocks. The command to insert the block has the entire block path so I don't have to rely on setting that up for everyone.
In AutoCad Mechanical only the blocks show up. No lines, arcs or anything else is drawn. I do not use a command method (like in LiSP) to create those objects, I create them through the block table and block table records.
What do I have to do to get my code to run in AutoCad Mechanical 2012?
I would like VBA to convert all layouts in drawing to single .PDF file.
Now I can convert it to PDF file with separate PDF files, but not know process to convert to a Single PDF file with all .DWG layouts.
I am getting "Undefined group code 440 for object on line 3222." when I try to load a DXF back into CAD.
View 1 Replies View RelatedI have to annotate a lot of pipes and valves with the correct line numbers. Each line/valve got its own layer name equal to the line number.
Any annotation tool that can annotate such lines by clicking on the line and then get the layer name automatic in the end of a leader,?
I don;t know what happen with this piece of code, I have checked it a million of times and seems to be well done. I'm trying to filter a previous selection and select Text or Mtext objects that are in the layer COTREF, and that contain the strings "%%c" AND "L" at the same time. The problem is that the code it's not selecting objects with the "L" included.
Here's the
(setq grupo1 (ssget "" '((0 . "TEXT,MTEXT")(8 . "COTREF")(-4 . "<AND")(1 . "*%%c*")(1 . "*L*")(-4 . "AND>"))))
The most unreasonable thing it's that I have 2 text objects exactly the same and when using this filter codes just one object it's selected (cyan cloud), check included DWG file.
I'v been searching about it and seems some persons are having problems with ssget filters in the newer versions of AutoCAD, I'm using 2012. I'm also suspecting for the character "%" which could be working as a wild-card, but as far as I know it is not.
I have try every solution on the autodesk page about the blank activation page problem and it is still not working for me... I have instal autocad and uninstal it multiple time and I always get the error 2738 (probably related) the program is working fine on the trial but it will expired soon. What does the error 2738 mean?
View 1 Replies View RelatedMy computer would crash and reboot. I downloaded and installed the partner certified driver for my video card. (nvidia quadro fx 3450/4000 sdi) This solved the crashing problem, but now every time I open inventor i receive an ilogic activation error. I have reset my ribbon and that did not work.
View 2 Replies View RelatedI am trying to activate my free student version of autocad architecture 2013, and the serial number I am provided on the first activation screen is invalid on the next page.
View 1 Replies View RelatedAutoCAD 2009 LT
windows 7 Pro, 64 bit
Vantec 6 port Sata ii 150 PCI Host card w/ raid
Crucial 128gb SSD hard drive
I'm not running the system in RAID.
I'm having issues with a Sata card I installed on one machine. Â It's losing a hard drive from time to time and I have to unplug the Sata cables and plug them back in so the computer will boot up and function like normal. Â The only problem is that it casues an activation issue with AutoCAD. Â Now I've reached the reactivation limit for CAD.
Can I manually enter something into the registry to correct the activation issue? All drivers are up to date and I've reinstalled the driver for the controller card.
I'm trying to create a swatch in Illustrator with our company's colors. I already succeedid in creating a palet with the RGB and CMYK colors, but I also want to do this with the PMS colors.However, I can't seem to find the correct color book in which to locate the correct PMS color.
I only have the number of the PMS color, I don't know which color book to choose?
Will Adobe allow me to activate my software (PS6) on a MacbookPro laptop *and* my Windows desktop?
View 2 Replies View RelatedI am still running PS CS on Windows 7 - it does all that I need. I just cloned my system disk to a SSD and had to make some changes to the virtual memory settings as a result. PS CS now says that the machine configuration has changed and it needs to be re-activated (yawn).Â
However when I try to activate online it says 'the activation system is not available at this time.' Is this because it's not possible to activate PS CS any longer, or is it genuinely just broken today? I have retired over a period of a couple of hours.
how to disable a registered copy of Master Suite? I currently have it installed on both my laptop and my desktop. One day my desktop's hard drive corrupted itself and would not allow my pc to boot no matter what I tried. So I ended up doing a low level format to my drive and reinstalling the operating system along with master suite. I was not able to deactivate my desktop's CS4 install because the computer was not able to boot into windows. Formating did not disable my copy of master suite, so when I restalled master suite it claims that I have it running on three computers yet, I have it only running on two computers. I installed it on to same pc, with the same operating system. My big question is, how do I disable the defunct copy of CS4 that is not working so I can use my fresh install of CS4 and my current install of CS4 on my laptop? Please help. PC specs: Intel Q9450 @ 3.6GHz (8 x 450FSB) / Abit IX38 Quad GT / 8Gb G.Skill @ 5-5-5-15 1000MHz / 2X 8600GT's (Core 700Mhz - Mem 760Mhz) / 2X Seagate 500GB (RAID 0) + 2X Seagate 1.5TB / Creative Labs X-Fi / PCP&C Silencer 750W / Lian Li V2000B Plus II / Vista Ultimate X64 SP1
View 2 Replies View RelatedI'm trying to install Photoshop CS2 for a client, but when I launch the application I get the error: "An error has been detected and activation cannot continue. Please restart your computer and reinstall the application"
I've already done the obvious thing to reboot and re-install the application with the same error. I tried deleting temporary files to no avail. Is there any other solution I should try before I re-image the machine?
Does the CS2 version of Photoshop actually do anything when you click the 'activate' option in the Help menu? Mine does not. I attempted to activate it via the phone system as well, and it asks for an activation number that should have been provided during installation, but does not appear anywhere on the registration page or anywhere else in the software. I've tried to contact Adobe, but from what I've seen on the Support boards, I may never hear from them. Allegedly (according to the support site) I should get an initial response via email within 4 hours of submitting the ticket (never got that) and some sort of informed reply within 3 days. So far, not a thing. Trying to contact them by phone results in literally hours listening to bad muzak and an automated system, but no human contact. Does anyone have any info on this? I realize it's an older version, just trying to determine if this is normal behavior for that version, or if perhaps the vendor needs to be visited by the Men in Blue.
View 6 Replies View RelatedI have a Photoshop CS installed in my computer but the 30-day grace period is gone. I tried to re-install it to continue practicing with the software but still it won't allow me to use it.
View 3 Replies View RelatedI've got CS3 installed on a computer and a few days ago I installed Fedora and accidently erased the copy of Windows. Now I want to install CS3 on another machine but I can't activate it. It tells me that first I have to deactivate CS3 from the other machine.My problem is that I can't boot on windows anymore in order to do that. The windows partition was deleted.
View 2 Replies View Relatedwhenever i go to activate my copy of photoshop, an error message pops up. "An error has occured while trying to begin activation. Please make sure you have administrator priveleges and try again. If you continue to experience this problem, try reinstalling the application."I tried reinstalling; didn't work.
View 3 Replies View RelatedI was wondering if it is standard behaviour for my PS CS6 subscription to require me to log in to Activate the license EVERY time I use it? I thought that one it was activated, PS only checks the Activation every 30 days. Once I log in the activation works fine, however if for any reason my internet connection was not available, it would seem that I would not be able to use my copy of PS.
Â
I realize that that would happen even if the check was every 30 days, but that would only be a possible issue once a month, not every day!