AutoCAD LT :: Polar Tracking Extension Lines Not Working
Dec 9, 2005
Having problem of polar tracking extension lines working in one direction, but not perpendicular to that orientation? For example, when drawing a simple rectangle after drawing (2) sides, If I go to snap to my initial starting point to show a vertical extension line to intersect with my third line I am drawing, the vertical extension will not show up, even though the horizontal extension line is visible, and even though it snaps to the my starting point to where I wish have the polar tracking show the vertical extension.
View 9 Replies
ADVERTISEMENT
May 5, 2009
I'm working in Autocad 2009 full, I've "polar tracking" ON, "Object snap", as well as "Object snap tracking" but still my polar tracking doesn't work. How to resolve this problem?
View 9 Replies
View Related
Sep 29, 2011
All my polar tracking options are turned to Zero.
strangly enough its does give me one tracking option (read line) wile drawing at 5°
and when i draw a square it seems like my plane is off a bit (prolly 5°, looks like a perspective)
Tried fiddling around with the DSETTINGS command but nothing goes.
so i s my plane off, UCS off, also i get sometimes 1 out of 10 times an innorect SNAP ( snap to a point and its off by a 0,x margin. i
View 1 Replies
View Related
Feb 3, 2012
I seem to be having trouble with polar tracking on. With this activated and in front view I can only create a line in up or down (Y) direction. I cannot create a line along the z axis. This happens randomly so I must be overlooking a setting somewhere.
View 9 Replies
View Related
Nov 29, 2011
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies
View Related
Sep 18, 2013
I have a drafter that is using AutoCAD LT 2013. When they are drafting it acts like the Snap is on and Poplar tracking does not seem to be working. They do not have Snap on and they are using Polar tracking.
Have looked at all the setting that I can think of and compaired it to my AutoCAD 2009, full version. Our setting are identical. We both have Windows 7. I have mine set to look like XP, they have theirs with a custom looking display.
View 1 Replies
View Related
Feb 18, 2009
I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies
View Related
Dec 1, 2011
I am having trouble locking onto a temporary tracking point in autocad 2011. I can't seem to find the start tracking icon and it doesn't recognize the 'TT' command. I have a tracking line, I just can't seem to do it in two dimensions.
View 2 Replies
View Related
Oct 23, 2013
Since AutoCAD 2013, I'm not able to use tracking when inserting block from tool palette. Example, I want to insert a door at 6 inches from a wall. I click the door from the tool palette, leave a tracking point at the wall corner, move the cursor in the right direction and type 6 follow by enter. The door is insert randomly in the drawing. It was working perfectly in previous release.
Actually I had to insert the door anywhere in the drawing and moving it at the right place and rotate it if required, it is very tedious.
View 1 Replies
View Related
Aug 28, 2012
How do I get the extension lines to be annotative?
View 7 Replies
View Related
May 6, 2013
I want to use diameter extension lines to span the diameter of the circle by forcing the dimension line to be on. When I do that, the arrows are on the outside of the diameter and I want them on the inside so I use the flip arrow command. What happens is the extension line opposite of the dimension text is sticking outside the circle and I want to get rid of it because it just looks bad. I dont see a way of turning off this little extension line. Every thing I turn off doesnt seem to do anything.
View 7 Replies
View Related
Sep 15, 2012
Sometimes when I am dimensioning an object, my autosnap will pick up the end of an adjacent dimension extension line instead of the end of the object. Is there a way to prevent that?
View 4 Replies
View Related
Jun 29, 2011
My snap to extension feature is not working, and I'm looking to see why. In my object snap menu the extension is selected, and aside from that I'm not sure what else it could be other than bugging out.
The extention line (green dashed) will usually (but not always) show up in the vertical direction but almost never in the horizontal axis.
View 2 Replies
View Related
Dec 9, 2010
I have a video file created from one of my old VHS tapes. Unfortunately the display shows two rows of tracking lines about two inches from the top and bottom. Can VS ProX2 filter them out?
View 4 Replies
View Related
Jul 31, 2013
When placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
View 3 Replies
View Related
Aug 10, 2012
I have programs that at some point or another create dimensions for what was drawn. When you have a vertical dimension that doesn't fit between the extension lines, it will either go up and to the right or down and to the left.
I can change it manually by selecting the dimension and then right click and pick Dim Text position > Move with leader.
What I want to know is, is there a way to set the vertical dimension where you want it programatically? I would like to put the vertical dimension down and to the right of the arrows if possible.
View 1 Replies
View Related
May 17, 2007
Having used another CAD program for several years, I was used to the idea that all radius dimensions, like of a given arc, would easily start at the center of the arc, thereby denoting the position of the arc's center.
I'm slightly bugged with some CAD users, even books on the subject by autocad users, that give an arc's dimension from the outside of the arc, yet fail to show the location of the arc's center when it may not be self explanatory. Not good dimensioning practice from what little I've been schooled...
So, in AutoCAD 2007, how do I get an arc's radius dimension line to start at the center and point out to the edge. I can do all kinds of things to the position of the text, etc, but can't figure how to get it to start at the center. (The dimension line needs to start at the center.)
View 9 Replies
View Related
Nov 18, 2012
Some times when I re open a drawing I have been working on, I start to dimension and I notice that the dimension extension lines stay the same length when I move the dimension in and out from the object being dimensioned.
Not sure why this happens, I do all my dimensions in model space, in fact I do just about everything in model and then just set it up in paper space to print.
I never change anything when I start a new drawing in my template, so not sure why it happens.
View 2 Replies
View Related
Dec 1, 2011
I have just upgraded from Map 2009 to 2012 4-bit and many of my lisp programs using map functions do not work. Is there an explanation for this and is there a new "catalog" of data extension function and such available somewhere?
View 5 Replies
View Related
Sep 16, 2011
I am using AutoCAD 2011. When I create a radius dimension on the inside of an arc, and I place the dimension beyond the center point of the arc, AutoCAD automatically draws an extension to the arc and points my radius dimension leader to the outside of this extension, rather than to the inside of the original arc.
I don't really like this. I prefer for my demension leader to point to the inside of the original arc. I can get exactly what I want by going into "Properties" for the radius dimension and turning the "Ext Line" property off.
Rather than having to do this every time, I'd like to create a dimension style that would give me this functionality all of the time. When I try to modify my dimension style, I see that there are just two parameters for Suppress Ext Line 1 and Suppress Ext Line 2. These seem to apply to both linear dimensions and radial dimensions. Is there anything I can do to suppress the extension line for radial dimensions only and not linear dimensions?
View 6 Replies
View Related
Jun 19, 2013
I tried installing an extension ("Dr Browns Services") from inside Photoshop CC. The install hangs. I cancelled and entered Adobe Extension Manager CC and it simply hangs on launch. I can get out of it with a forced quit. Meanwhile Photoshop itself is quite stable.How can I un freeze Adobe Xtension Manager CC?
View 1 Replies
View Related
Feb 9, 2012
I'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
View 2 Replies
View Related
Jul 10, 2013
I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies
View Related
Jan 13, 2012
I've got the very basics down on autocad 2012 but was just wondering if you can use the polar command while using snap from, like for example if i want to draw a circle 180mm from another point at 45deg (@180<45)
View 6 Replies
View Related
Mar 29, 2012
I am trying to build a 3d model and I am requirng to draw 2d sketches in the side view e.g right but all the happens is that the polylines do not go at the angle I need them at they jsut go parallel to the bottom. Also how do i create like a plane which I can draw a flat sketch on which i can set an offset from my first sketch?
View 1 Replies
View Related
Dec 5, 2012
I am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 Replies
View Related
Sep 24, 2012
I need to put in the polar equation r=e^theta. Is this even possible in autodesk? How can I do it? Should I spline through points instead?
View 4 Replies
View Related
Dec 12, 2013
I am looking for a way to change the toggle polar On/Off from F10 to F6. I already did it with the "delete" and the "Ortho" keys but i can't find the macro for the toggle polar on/off.
Has you can see on the picture for Delete it's ^C^C erase;
For ortho it's ^O
Maybe for Polar it's ^P but i could validate with you before i do any changes. (;
View 1 Replies
View Related
Jul 2, 2013
I have drawn a bar counter in 3d which has a top rectangular shape with curved corners. The front of the bar has 100mm wide wooden fascia panels and they need to follow the line of the bar. I am using the Polar Array function which works great except I cant seem to get the panels to follow the curves/arcs around the corners, but they sit neatly on all the straight edges of the bar. So in other words the panels are straight and lined up on the straight parts of the bar but the panels stay at 90 degrees instead of following the curved areas of the bar.
View 1 Replies
View Related
Dec 13, 2012
I put the three holes in the outer ears/lugs with a Polar Array and want to change their diameter to make them smaller. If try to use Delete Faces to remove the holes it drastically effects one of the other lugs.
Is there a better way to edit holes in an array and is there a way to make arrays non-associative after the fact of creating them? The dwg is saved in 2007 but created with 2013
View 6 Replies
View Related
Aug 4, 2012
I drew the polar arrayed rectangle as attached and tried to trim the inside lines to create an octagon but i cant trim the object.
However, if i try the same thing without polar arraying ( i.e just by drawing the two rectangles similarly) it works. I would like to know what might be causing this.
View 4 Replies
View Related
