AutoCad 2D :: Diameter Extension Lines
May 6, 2013
I want to use diameter extension lines to span the diameter of the circle by forcing the dimension line to be on. When I do that, the arrows are on the outside of the diameter and I want them on the inside so I use the flip arrow command. What happens is the extension line opposite of the dimension text is sticking outside the circle and I want to get rid of it because it just looks bad. I dont see a way of turning off this little extension line. Every thing I turn off doesnt seem to do anything.
View 7 Replies
ADVERTISEMENT
Nov 29, 2011
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies
View Related
May 30, 2013
see attached jpg. I want to know if there is a way to get rid of the "extension line" that the diameter dimension creates?
as you can see it runs over the slots on my detail and looks confusing.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
View 5 Replies
View Related
Aug 16, 2013
When you make a diameter or radius dimension it always has this static extension line shown in red when you move the dimension far enough away. I can not seem to extend this extension line at all it is always the same length no matter what variable I change. How to lengthen this extension line?
View 9 Replies
View Related
Jul 5, 2012
It's 2012. I haven't found a setting in the dim style or the RMB options to turn off the extension line. I saw the posts showing drawing a sketch in the view but come on, all that to just turn off the line?
IV 2012 all sp & fixes
View 8 Replies
View Related
Aug 28, 2012
How do I get the extension lines to be annotative?
View 7 Replies
View Related
Sep 15, 2012
Sometimes when I am dimensioning an object, my autosnap will pick up the end of an adjacent dimension extension line instead of the end of the object. Is there a way to prevent that?
View 4 Replies
View Related
Dec 9, 2005
Having problem of polar tracking extension lines working in one direction, but not perpendicular to that orientation? For example, when drawing a simple rectangle after drawing (2) sides, If I go to snap to my initial starting point to show a vertical extension line to intersect with my third line I am drawing, the vertical extension will not show up, even though the horizontal extension line is visible, and even though it snaps to the my starting point to where I wish have the polar tracking show the vertical extension.
View 9 Replies
View Related
Jul 31, 2013
When placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
View 3 Replies
View Related
Aug 10, 2012
I have programs that at some point or another create dimensions for what was drawn. When you have a vertical dimension that doesn't fit between the extension lines, it will either go up and to the right or down and to the left.
I can change it manually by selecting the dimension and then right click and pick Dim Text position > Move with leader.
What I want to know is, is there a way to set the vertical dimension where you want it programatically? I would like to put the vertical dimension down and to the right of the arrows if possible.
View 1 Replies
View Related
May 17, 2007
Having used another CAD program for several years, I was used to the idea that all radius dimensions, like of a given arc, would easily start at the center of the arc, thereby denoting the position of the arc's center.
I'm slightly bugged with some CAD users, even books on the subject by autocad users, that give an arc's dimension from the outside of the arc, yet fail to show the location of the arc's center when it may not be self explanatory. Not good dimensioning practice from what little I've been schooled...
So, in AutoCAD 2007, how do I get an arc's radius dimension line to start at the center and point out to the edge. I can do all kinds of things to the position of the text, etc, but can't figure how to get it to start at the center. (The dimension line needs to start at the center.)
View 9 Replies
View Related
Nov 18, 2012
Some times when I re open a drawing I have been working on, I start to dimension and I notice that the dimension extension lines stay the same length when I move the dimension in and out from the object being dimensioned.
Not sure why this happens, I do all my dimensions in model space, in fact I do just about everything in model and then just set it up in paper space to print.
I never change anything when I start a new drawing in my template, so not sure why it happens.
View 2 Replies
View Related
Sep 16, 2011
I am using AutoCAD 2011. When I create a radius dimension on the inside of an arc, and I place the dimension beyond the center point of the arc, AutoCAD automatically draws an extension to the arc and points my radius dimension leader to the outside of this extension, rather than to the inside of the original arc.
I don't really like this. I prefer for my demension leader to point to the inside of the original arc. I can get exactly what I want by going into "Properties" for the radius dimension and turning the "Ext Line" property off.
Rather than having to do this every time, I'd like to create a dimension style that would give me this functionality all of the time. When I try to modify my dimension style, I see that there are just two parameters for Suppress Ext Line 1 and Suppress Ext Line 2. These seem to apply to both linear dimensions and radial dimensions. Is there anything I can do to suppress the extension line for radial dimensions only and not linear dimensions?
View 6 Replies
View Related
Feb 9, 2012
I'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
View 2 Replies
View Related
Jun 14, 2011
When i create a part in inventor, and create a rule for my part list of my drawing. Where do i find the diameter character
PL-5 Ø 300
View 4 Replies
View Related
Jan 5, 2014
Curious, I am trying to get numbers 'engraved' (extruded) into a diameter of a dial ring. I was able to create a couple of planes to create the marking lines around the OD, but am unsure how to add numbers and extrude said numbers (in the easiest fashion possible). I need to go from 0 to 90 on the longest marking that starts at 0° and is every 36°.
Also, that being said, with the little I tried and was unhappy with, I created a text box at the 0° marker but the text was in the wrong rotation the marker and rotation box was greyed out. How can I resolve this...or is it even related?
File attached.
----------------------
Inventor 2014 PDS
View 2 Replies
View Related
Sep 3, 2004
In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies
View Related
Sep 30, 2013
I am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies
View Related
Jan 5, 2009
When I save an IDW as a PDF using the 'Save Copy As' function the spacing on the diameter logo for dimensions running up the page gets lost and makes it difficult to read and confusing. (see attached pic). I am not sure if it is a style thing, or a template issue, or just a general inventor fault.
View 9 Replies
View Related
May 7, 2011
I opened a file that showed all kinds of screws and english and metric hardware. Example: A socket head cap screw you could select the diameter and length etc. I can't find it again. I have acad 2010.
View 2 Replies
View Related
Aug 15, 2010
How do I add a single symbol, diameter for example, to a MLD aligned to middle with limits? I am dimming an iso metric dwg and ddi and dra do not work with isocircles. I want it to represent the limits tolerance that' I've circled in red in attachment.
View 8 Replies
View Related
Sep 13, 2012
If I want to draw a 10% slope on 5' contours how do I calculate the circle diameter needed to construct the slope in order to connect the lines where the circles intersect the contour?
View 1 Replies
View Related
Sep 21, 2011
By some setting or default, when I dimension a diameter in Autocad 2010, I get a dim line that only has one arrow that points to one side of a circle, just like a radius. I'd like the diameter dims to have an arrow on both sides of circles.
I've been through the settings in Dimstyles. and didn't find a combination that made the desired change. I've looked at the properties for a specific diameter dimension and found nothing that worked there. I looked into block modifications using BEDIT and Properties, but I found nothing there either. While I may have overlooked a combination of changes in Properties, I tried a lot in there.
View 7 Replies
View Related
Aug 10, 2009
I design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies
View Related
Nov 26, 2008
We've been having trouble with all our IDW's, whenever we put a dimension or text with the diameter symbol it plots as 'Q'.
Even in print preview it still appears as the diameter symbol, although when actually printed, it comes out as 'Q'. To combat this in the meantime we have firstly been creating PDF's which display the correct diameter symbol and then printing.
i.e Ø30 on IDW prints as Q30 on paper.
We are using Autodesk inventor suite 2009.
View 7 Replies
View Related
Aug 7, 2013
connecting two circles with different diameter into a solid. I tried loft, but it is a partial solution since it creates a surface. I know there is a solid option. There surely is a way and a simple one but i don't know how. Bellow there is a picture with diameters and length of the mast. Also i included a dwg file. Not much done there.
View 9 Replies
View Related
Mar 10, 2012
How to treat reference diameter dimensions.
If I open up an session of AutoCAD, reference dimensions enclose the diameter symbol in the parenthesis.
Using Inventor, however, the diameter symbol is put outside the parenthesis.
Which is right? It seems silly to make extra work for the user for otherwise identical drawings.
View 4 Replies
View Related
Oct 1, 2012
What is the smallest object I can draw and "SEE" in AutoCAD? I was hoping to prove a point in my introductiory AutoCAD class, but it appears I have been lying!! I tried to draw a cirlce with a diameter of 1.24E-10m. The dot shows up, but I cannot zoom to it. I tried using an enormous zoom scale, but did not have any luck. I am almost positive my instructor introduced the capabilites of AutoCAD by drawing a full scale helium atom, and that was release 14. Is this still possible? Obviously the atom can be drawn, but what are the zoom limitations?
View 5 Replies
View Related
Aug 12, 2012
How do I determine position of the three 5,5 mm diameter holes? I am missing dimensions for horizontal position, am not I right?
View 1 Replies
View Related
Jun 7, 2011
How would you add features like radius, diameter to a leader line?
View 5 Replies
View Related
Dec 13, 2011
The diameter icon different when you pick up the top line and the third line?
When I used Inventor 2009, I found that problem, but 2012 still the same. Is the inventor design that way or that can be improved?
View 3 Replies
View Related
