How do I add a single symbol, diameter for example, to a MLD aligned to middle with limits? I am dimming an iso metric dwg and ddi and dra do not work with isocircles. I want it to represent the limits tolerance that' I've circled in red in attachment.
View 8 RepliesWhen I save an IDW as a PDF using the 'Save Copy As' function the spacing on the diameter logo for dimensions running up the page gets lost and makes it difficult to read and confusing. (see attached pic). I am not sure if it is a style thing, or a template issue, or just a general inventor fault.
View 9 Replies View RelatedWe've been having trouble with all our IDW's, whenever we put a dimension or text with the diameter symbol it plots as 'Q'.
Even in print preview it still appears as the diameter symbol, although when actually printed, it comes out as 'Q'. To combat this in the meantime we have firstly been creating PDF's which display the correct diameter symbol and then printing.
i.e Ø30 on IDW prints as Q30 on paper.
We are using Autodesk inventor suite 2009.
How to treat reference diameter dimensions.
If I open up an session of AutoCAD, reference dimensions enclose the diameter symbol in the parenthesis.
Using Inventor, however, the diameter symbol is put outside the parenthesis.
Which is right? It seems silly to make extra work for the user for otherwise identical drawings.
How do I go about increasing the diameter to a degree symbol? Am using the ROMANS.SHX type of file, and when used the degree symbol is sort of miniature (looking and plotting) in comparision to the numeral next to it.
What number do I have to alter in the .SHX file to enlarge it then?
I have a DWG that contains text in TAHOMA font. When I create a PDF using DWG to PDF, everything is plotted correctly, except for the text object containing a diameter symbol (%%c).
In the custom properties of the plotter configuration, I have checked the box to capture all fonts, so text in TAHOMA is also plotted. If the text object contains a diameter symbol, the entire text object is not plotted. If there is no diameter sign in the text object, everything works fine.
If I change the font to ARIAL, everything is plotted correctly, so I assume the problem lies in the TAHOMA font.
If I check the box to capture all fonts as geometry, the diameter symbols are plotted, but I do not want to capture my texts as geometries.
I don't know if it's a bug...
When using dual units on a drawing ( millimeters and inches for example) the symbol "diameter" is no reproduce in the second unit ... see pictures below!
--------------------------------
Autodesk Product Design Suite Ultimate 2013
Win 7 Pro 64 bits SP1
Bi-Xeon E5520 (2x Quad-core @2.27GHz)
Quadro Fx 1800 768Mo GDDR3
6Go Ram DDR3 667MHz ECC
Autodesk Inventor 2010 .idw - How do I attach a Datum Identifier symbol to the bent leader of a hole or diameter callout such that when the dimension is moved, the symbol will follow?
View 1 Replies View RelatedHow to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
I need to change the color of the M and [R] in this text, allow me to set the stage.
To create this symbol you type the Letter M, change the font to our companys symbol text and the following characters then follow. However when editing the text it is recognized as a single character. I have changed the text to outlines, however it still changes every letter when I change the color. I have went into isolation mode and it still changes every color.
I made the background of an object (single color symbol) transparent, then re-sized it. I then added a transparent layer to another image, with the idea of placing the symbol onto that layer. I tried to move the symbol, but that didn't work. I copied the symbol image and tried to paste it onto the layer. It pasted, but all I got was a transparent rectangle that matched the size of the symbol image.
View 2 Replies View RelatedThe attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedIs there a way to edit the text in a symbol instance without breaking the link to the symbol?
a really simplen example would be several instances of the same button graphic but with different labels.
I know these things are possible in Fireworks, but couldn't find a way to make it happen in Illustrator.
Is there a way to "eval" or dynamically set a symbol name that has been parsed from XML to build a symbol path? For example, I'm trying to dynamically set a variable to the path of a sysmbol already on the stage, but it's not working correctly:
var xmlSymName = $('symName', this).text(); // where symName = "sym4" from a parsed XML node
var whatPOI = sym.getComposition().getStage().getSymbol("sym1").getSymbol("sym2").getSymbol("sym3").getSymbol(xmlSymName).getSymbolElement();
Basically I have a lot of points on a map and I'd like to be able to name the points along with other data like tooltip callouts, etc populated via XML then loop through the XML to build the points of interest on the map. If I can get the above working I can place that variable path reference into an array and grab the data from it later. But the path is not working the way I have it.
Can I call a symbol from the symbol panel and place it on the stage?
View 2 Replies View RelatedThe scenario is this, I have a symbol(TitlePage) on my main timeline. Inside the symbol(TitlePage) there is a play button. How can i set a click event on this symbol that access the main timeline(stage) labels?
View 6 Replies View Related I have the following
STAGE
SYMBOL_1
DIV_PLAY
MOUSEUP(COMMAND)
DIV_STOP
MOUSEUP (COMMAND)
[Code]...
I would like to do the following:
play "SYMBOL_2" - "DIV_ANIMATION_1" - "ANIMATION_1_START" from within "SYMBOL1" - "DIV_PLAY" with the mouseup command
URL....I know that i can sym.getComposition().getStage().getSymbol("div_animation_1").play(); from within "div_play" but how do i access a point on the timeline and play from there...
How do I add new symbol to an exsiting user defined symbol library? AI CS5.5, Mac.
View 2 Replies View RelatedI would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.
View 7 Replies View RelatedWhen i create a part in inventor, and create a rule for my part list of my drawing. Where do i find the diameter character
PL-5 Ø 300
Curious, I am trying to get numbers 'engraved' (extruded) into a diameter of a dial ring. I was able to create a couple of planes to create the marking lines around the OD, but am unsure how to add numbers and extrude said numbers (in the easiest fashion possible). I need to go from 0 to 90 on the longest marking that starts at 0° and is every 36°.
Also, that being said, with the little I tried and was unhappy with, I created a text box at the 0° marker but the text was in the wrong rotation the marker and rotation box was greyed out. How can I resolve this...or is it even related?
File attached.
----------------------
Inventor 2014 PDS
In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies View RelatedI am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies View RelatedI opened a file that showed all kinds of screws and english and metric hardware. Example: A socket head cap screw you could select the diameter and length etc. I can't find it again. I have acad 2010.
View 2 Replies View RelatedIf I want to draw a 10% slope on 5' contours how do I calculate the circle diameter needed to construct the slope in order to connect the lines where the circles intersect the contour?
View 1 Replies View RelatedBy some setting or default, when I dimension a diameter in Autocad 2010, I get a dim line that only has one arrow that points to one side of a circle, just like a radius. I'd like the diameter dims to have an arrow on both sides of circles.
I've been through the settings in Dimstyles. and didn't find a combination that made the desired change. I've looked at the properties for a specific diameter dimension and found nothing that worked there. I looked into block modifications using BEDIT and Properties, but I found nothing there either. While I may have overlooked a combination of changes in Properties, I tried a lot in there.
I want to use diameter extension lines to span the diameter of the circle by forcing the dimension line to be on. When I do that, the arrows are on the outside of the diameter and I want them on the inside so I use the flip arrow command. What happens is the extension line opposite of the dimension text is sticking outside the circle and I want to get rid of it because it just looks bad. I dont see a way of turning off this little extension line. Every thing I turn off doesnt seem to do anything.
View 7 Replies View RelatedI design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies View Relatedconnecting two circles with different diameter into a solid. I tried loft, but it is a partial solution since it creates a surface. I know there is a solid option. There surely is a way and a simple one but i don't know how. Bellow there is a picture with diameters and length of the mast. Also i included a dwg file. Not much done there.
View 9 Replies View RelatedWhat is the smallest object I can draw and "SEE" in AutoCAD? I was hoping to prove a point in my introductiory AutoCAD class, but it appears I have been lying!! I tried to draw a cirlce with a diameter of 1.24E-10m. The dot shows up, but I cannot zoom to it. I tried using an enormous zoom scale, but did not have any luck. I am almost positive my instructor introduced the capabilites of AutoCAD by drawing a full scale helium atom, and that was release 14. Is this still possible? Obviously the atom can be drawn, but what are the zoom limitations?
View 5 Replies View RelatedHow do I determine position of the three 5,5 mm diameter holes? I am missing dimensions for horizontal position, am not I right?
View 1 Replies View Related