I don't know if it's a bug...
When using dual units on a drawing ( millimeters and inches for example) the symbol "diameter" is no reproduce in the second unit ... see pictures below!
--------------------------------
Autodesk Product Design Suite Ultimate 2013
Win 7 Pro 64 bits SP1
Bi-Xeon E5520 (2x Quad-core @2.27GHz)
Quadro Fx 1800 768Mo GDDR3
6Go Ram DDR3 667MHz ECC
is there any way I can place dimension on drawing that would be in dual units (in decimal degrees and in deg min sec)?
I did not find this possible so far.
When I save an IDW as a PDF using the 'Save Copy As' function the spacing on the diameter logo for dimensions running up the page gets lost and makes it difficult to read and confusing. (see attached pic). I am not sure if it is a style thing, or a template issue, or just a general inventor fault.
View 9 Replies View RelatedWe've been having trouble with all our IDW's, whenever we put a dimension or text with the diameter symbol it plots as 'Q'.
Even in print preview it still appears as the diameter symbol, although when actually printed, it comes out as 'Q'. To combat this in the meantime we have firstly been creating PDF's which display the correct diameter symbol and then printing.
i.e Ø30 on IDW prints as Q30 on paper.
We are using Autodesk inventor suite 2009.
How to treat reference diameter dimensions.
If I open up an session of AutoCAD, reference dimensions enclose the diameter symbol in the parenthesis.
Using Inventor, however, the diameter symbol is put outside the parenthesis.
Which is right? It seems silly to make extra work for the user for otherwise identical drawings.
Autodesk Inventor 2010 .idw - How do I attach a Datum Identifier symbol to the bent leader of a hole or diameter callout such that when the dimension is moved, the symbol will follow?
View 1 Replies View RelatedI am displaying dual units in a drawing with primary units being Customary. The metric unit displayed is incorrect.
View 1 Replies View RelatedHow do I add a single symbol, diameter for example, to a MLD aligned to middle with limits? I am dimming an iso metric dwg and ddi and dra do not work with isocircles. I want it to represent the limits tolerance that' I've circled in red in attachment.
View 8 Replies View RelatedHow do I go about increasing the diameter to a degree symbol? Am using the ROMANS.SHX type of file, and when used the degree symbol is sort of miniature (looking and plotting) in comparision to the numeral next to it.
What number do I have to alter in the .SHX file to enlarge it then?
I have a DWG that contains text in TAHOMA font. When I create a PDF using DWG to PDF, everything is plotted correctly, except for the text object containing a diameter symbol (%%c).
In the custom properties of the plotter configuration, I have checked the box to capture all fonts, so text in TAHOMA is also plotted. If the text object contains a diameter symbol, the entire text object is not plotted. If there is no diameter sign in the text object, everything works fine.
If I change the font to ARIAL, everything is plotted correctly, so I assume the problem lies in the TAHOMA font.
If I check the box to capture all fonts as geometry, the diameter symbols are plotted, but I do not want to capture my texts as geometries.
A label that I've created in Illustrator isn't mapping onto a can in 3D revolve
1. Traced the side of a can using the pen tool, and turned it into a 3D object using revolve (NOTE: I haven't applied any stroke to it, just a white fill - otherwise, Map Art wouldn't even open, it would just say " Artwork produced no surfaces for artwork mapping.")
2. Dragged the label into symbols
3. Clicked on the side of the can, opened 3D revolve, and clicked preview
4. Clicked Map Art, selected the appropriate surface
5. Selected the label from the symbols, scaled it, and clicked preview
When nothing happened, I tried everything: It wouldn't show in Invisible Geometry, so it can't be on the inside of the surface. When I tried Shade Artwork (slower), the whole program just shut down right away...
Interestingly, when I selected a vector symbol, it appeared on the surface perfectly...any thoughts on what that could be?
The attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedUpgrading to a new computer.
1. What is the best CPU to use for Inventor between the i7 and the a Dual Xeon System
2. Would 32GB of memory easily cover all modelling such as assemblies?
3. Any advantage of having 2 x SSD instaed of 1 x SSD
4. Looking at the Nvidia GTX690 graphics card....this should be a good card
It it possible to create a design spec table so that it can import the weight from the model and display it in both kg and lbs?
View 5 Replies View RelatedWhen i create a part in inventor, and create a rule for my part list of my drawing. Where do i find the diameter character
PL-5 Ø 300
Curious, I am trying to get numbers 'engraved' (extruded) into a diameter of a dial ring. I was able to create a couple of planes to create the marking lines around the OD, but am unsure how to add numbers and extrude said numbers (in the easiest fashion possible). I need to go from 0 to 90 on the longest marking that starts at 0° and is every 36°.
Also, that being said, with the little I tried and was unhappy with, I created a text box at the 0° marker but the text was in the wrong rotation the marker and rotation box was greyed out. How can I resolve this...or is it even related?
File attached.
----------------------
Inventor 2014 PDS
In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies View RelatedHow do I change one of the dimensions in my sketch to be metric while maintaining the rest as a standard dimensions?
See attached pic.
Any way to show dual dimensions as shown on the right rather than the one which we get on the left
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I cannot figure out how to dual dimension a bend like so:
DIRECTION DEGREES RIMPERIAL [RMETRIC]
e.g. DOWN 90 R1/2"[13] preferred
or DOWN 90 R1/2"[R13] okay
There should be a degree symbol after the 90 in my examples but I can't figure out how to type it here. I can get DOWN 90 R1/2"[DOWN 90 R13] but it's too long.
How do I show dual dimension in Inventor drawing?
View 5 Replies View RelatedI design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies View RelatedThe diameter icon different when you pick up the top line and the third line?
When I used Inventor 2009, I found that problem, but 2012 still the same. Is the inventor design that way or that can be improved?
see attached jpg. I want to know if there is a way to get rid of the "extension line" that the diameter dimension creates?
as you can see it runs over the slots on my detail and looks confusing.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
I am trying to edit my drawing template dimension style to always do a diameter (if it is a circle). Right now it defaults to radius and I manually right click and change it. I found all sorts of styles for how it displays the radius and diameter, but didn't find where to set the default.
View 7 Replies View RelatedHow do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
My company is trying to Standardize all drawings produced to 1 format. the one we are attempting to create would be in the form of: nominal upper limit^lower limit. this is easily acheived in autocad and linear, chamfer, and hole/thread dimensions in inventor. but radii's and diameters from a round surface (as apposed to linear diameters) we have run into a snag with. We cannot seem to find a way to either remove the prefix symbols or be able to insert text between the symbol and tolerance.
below is a illistration of the problem and the form of the new dimensions.
We need re-location the diameter dimension after we change the drawing view's scale. but we didn't know how to change the Startpoint of the dimension (mark with Red word "1"), just find the text location.
Who knows how to set the new point to for the startpoint?
I keep hving trouble with a hole and the diameter tolerance.
Create a simple hole, single diameter concentric and specific depth. I go to the tolerance window for the diameter and change it to a Limits-Linear. I enter my values .3758 and .3754. Precision is .1234. I clikc OK, then go back to the tolerance, and its reset both values to .3756 What gives???? I've deleted and recreated the hole, edited it about 10 times, and still the same effect.
How can I get square tube as small as 1 inch in frame generator. The smallest I have is 1 1/4. Is there a content library that I can download that has smaller square tubing.
View 8 Replies View RelatedWe want to use dual dimensions for holes and figured out how to do this by editing the styles. This works great except for threaded holes the dual dimension is redundant as shown in the picture.
Is there a way to not have the dual dimension for threaded holes but keep them for other holes? Having a dual dimentsion for a metric thread or having it printed twice on the drawing is pointless.
INV 2013