The diameter icon different when you pick up the top line and the third line?
When I used Inventor 2009, I found that problem, but 2012 still the same. Is the inventor design that way or that can be improved?
I have two problems with a IDW drawing.
Most of my views have been crosed over by a red line in the Model browser window (se attachment) What does this red line meen?
Also, all the views with the red line have been set to Raster View Only. I can untick it without problems, but when I click OK and reopen the dialog the checkmark is back on.
How come inventor turns this mark on by itself?
Using Inventor 2014 64-bit
I am measuring the diameter of a circle in one drawing and it gives a distance that is far larger than similar types of circles in other drawings. Well I type UNIT in the command prompt and it shows inches. I convert it to feet and remeasure the diameter and it still gives me the same large number! What do I need to change? How many of you use unitless for measuring versus feet or inches?
I read up on the Help files and it said that Architectural and Engineering scales are set to feet and inches.
I am also confused how to use the conversion tool on the QuickCalc in AutoCAD. The "Convert From" and "Convert To" are set to meters. I am not sure WHAT the default unit of measurement is to begin with.
When i create a part in inventor, and create a rule for my part list of my drawing. Where do i find the diameter character
PL-5 Ø 300
Curious, I am trying to get numbers 'engraved' (extruded) into a diameter of a dial ring. I was able to create a couple of planes to create the marking lines around the OD, but am unsure how to add numbers and extrude said numbers (in the easiest fashion possible). I need to go from 0 to 90 on the longest marking that starts at 0° and is every 36°.
Also, that being said, with the little I tried and was unhappy with, I created a text box at the 0° marker but the text was in the wrong rotation the marker and rotation box was greyed out. How can I resolve this...or is it even related?
File attached.
----------------------
Inventor 2014 PDS
In Cable and Wire harness in AIP is there a way I can extract or dimension abundle diameter that is associative with the model? I was expecting that Ican dimension the diameter sizes in the nailboard drawing.
View 2 Replies View RelatedWhen I save an IDW as a PDF using the 'Save Copy As' function the spacing on the diameter logo for dimensions running up the page gets lost and makes it difficult to read and confusing. (see attached pic). I am not sure if it is a style thing, or a template issue, or just a general inventor fault.
View 9 Replies View RelatedI design molds for the rubber industry and I was using Acad 2000; I am just now starting to use inventor. I need to used the ordinate dimensioning although I need the dimension to be given as a diameter and not as a radius. Is there anyway to scale the ordinate dimension automatically as 2:1? This way when I give the prints to the tool room they don't have to manually double every diametrical dimension. The prints that I draw only show half of the mold, there for needing a 2:1 dimension scale.
View 9 Replies View RelatedWe've been having trouble with all our IDW's, whenever we put a dimension or text with the diameter symbol it plots as 'Q'.
Even in print preview it still appears as the diameter symbol, although when actually printed, it comes out as 'Q'. To combat this in the meantime we have firstly been creating PDF's which display the correct diameter symbol and then printing.
i.e Ø30 on IDW prints as Q30 on paper.
We are using Autodesk inventor suite 2009.
How to treat reference diameter dimensions.
If I open up an session of AutoCAD, reference dimensions enclose the diameter symbol in the parenthesis.
Using Inventor, however, the diameter symbol is put outside the parenthesis.
Which is right? It seems silly to make extra work for the user for otherwise identical drawings.
see attached jpg. I want to know if there is a way to get rid of the "extension line" that the diameter dimension creates?
as you can see it runs over the slots on my detail and looks confusing.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
I am trying to edit my drawing template dimension style to always do a diameter (if it is a circle). Right now it defaults to radius and I manually right click and change it. I found all sorts of styles for how it displays the radius and diameter, but didn't find where to set the default.
View 7 Replies View RelatedHow do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
My company is trying to Standardize all drawings produced to 1 format. the one we are attempting to create would be in the form of: nominal upper limit^lower limit. this is easily acheived in autocad and linear, chamfer, and hole/thread dimensions in inventor. but radii's and diameters from a round surface (as apposed to linear diameters) we have run into a snag with. We cannot seem to find a way to either remove the prefix symbols or be able to insert text between the symbol and tolerance.
below is a illistration of the problem and the form of the new dimensions.
We need re-location the diameter dimension after we change the drawing view's scale. but we didn't know how to change the Startpoint of the dimension (mark with Red word "1"), just find the text location.
Who knows how to set the new point to for the startpoint?
I keep hving trouble with a hole and the diameter tolerance.
Create a simple hole, single diameter concentric and specific depth. I go to the tolerance window for the diameter and change it to a Limits-Linear. I enter my values .3758 and .3754. Precision is .1234. I clikc OK, then go back to the tolerance, and its reset both values to .3756 What gives???? I've deleted and recreated the hole, edited it about 10 times, and still the same effect.
How can I get square tube as small as 1 inch in frame generator. The smallest I have is 1 1/4. Is there a content library that I can download that has smaller square tubing.
View 8 Replies View Relatedive been having a number of issues with an imported drawing which i have now resolved. however i cant now see my icon menu when im trying to open or save a drawing.
autocad.jpg
autocad.jpg
When opening a new drawing in 2013 the UCS icon isn't in the bottom left corner - how to correct ?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I don't know if it's a bug...
When using dual units on a drawing ( millimeters and inches for example) the symbol "diameter" is no reproduce in the second unit ... see pictures below!
--------------------------------
Autodesk Product Design Suite Ultimate 2013
Win 7 Pro 64 bits SP1
Bi-Xeon E5520 (2x Quad-core @2.27GHz)
Quadro Fx 1800 768Mo GDDR3
6Go Ram DDR3 667MHz ECC
When we make an external threaded part, like a stud or something, I'd like to save my lathe guys some time looking things up by showing the pitch diameters on the thread callouts.
I've looked through some posts on this and it doesn't seem like there's an easy way to do it in an automated fashion, even though the data is in the Thread.xls file. I'd really like to not have to look it up to make every print.
First, I thought I'd just use the "Custom Thread Designation" field, but as soon as I changed it in the XLS file, I kept getting alerts in Inventor saying that there was an error in the thread family because the callout applied to multiple fit classes or something like that. So that didn't work out very well. So....
1. Is there a way to do this?
2. What is the point of the "custom thread designation" infrastructure? Am I not using it correctly?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
Working in an assembly with sub-assemblies. I am trying to move a part not much more than the diameter or a hair, but this is causing lots of problems.
I am forced into editting an assy constraint. So I go thru the menu and except the edit.
Constraint box opens / and iventor says "ready" but it will not let me select and surfaces to define the mating.
My question is What is it the constraint is ready for?
How do I insert pipe with diameter greater than 12" diameter
View 6 Replies View RelatedIn the part attached you can measure the hole diameter of the thread M20x2.5
It is 17.294, but the smallest diameter, the tap drill, in the Thread.xls file is 17.5
I am trying to create a dimension in an .idw that goes from a line to the tangent of the outer diameter. I have tried several approaches but I cannot get it to work. Essentially I am trying to replicate a drawing which was created in Solidworks but I am having trouble with this dimension.
View 4 Replies View RelatedI want to make a part with two intersecting holes. The first one is threaded with a 3/8 BSP thread, and the second hole is just a normal unthreaded one with the same diameter as the first.
Normally, if I was making two unthreaded holes with the same diameter I would define a parameter called 'holedia' or something and link both holes to this parameter so I can change it easily if I want; no problem.
But because this time it's a threaded hole, I can't specify the diameter. I don't know what it is because Inventor just looks up '3/8 BSP female thread diameter' in some table. So what do I reference as the diameter of the second hole?
At the moment I'm just looking up a chart of BSP threads on the internet and entering the major diameter manually, and this works although it's a bit of a hassle. But if I wanted to change the hole to 1/2 BSP; I'd have to go back on the internet and find the new diameter to use for the second hole.
There must be a way to 'parameterise' the Inventor-generated diameter of the first hole, and then reference this for the second one, isn't there?
I tried making a driven dimension linked to the first hole and referencing this in the second, but this didn't seem right and it wouldn't update itself when I changed from 3/8 to 1/2.
The default format for a radius and diameter dimension is inserted with a prefix "R" and diameter symbol ahead of the measured dimension. Our company standard pre-Inventor was to place either "RAD" or "DIA" after the measured dimension. We can not seem to find anywhere in the setup to change how these type dimensions are inserted as a default or custom setting.
Can we change/customize the radius and diameter dimension formatting?
Inventor 2014 Ultimate
Windows 8 Pro
I need insert a cylinder into inner diameter of a ball bearing, logically it must rotate with the bearing but no, the bearing outer diameter is fixed to a support and works well, but when i insert the cylinder into the ball bearing it's fixed completely and the cylinder rotate into the inner diameter.
View 9 Replies View RelatedIt's 2012. I haven't found a setting in the dim style or the RMB options to turn off the extension line. I saw the posts showing drawing a sketch in the view but come on, all that to just turn off the line?
IV 2012 all sp & fixes
I am currently working on a culvert drawing, using two view ports for my plan and profile sheet. As you can see below in my attachment, the UCS icon in the upper viewport is distorted, I do not how this occurred nor do I know how to correct it.
View 2 Replies View RelatedAutodesk Inventor 2010 .idw - How do I attach a Datum Identifier symbol to the bent leader of a hole or diameter callout such that when the dimension is moved, the symbol will follow?
View 1 Replies View Related