AutoCAD Inventor :: Hole Diameter Tolerance Reset
Jul 2, 2012
I keep hving trouble with a hole and the diameter tolerance.
Create a simple hole, single diameter concentric and specific depth. I go to the tolerance window for the diameter and change it to a Limits-Linear. I enter my values .3758 and .3754. Precision is .1234. I clikc OK, then go back to the tolerance, and its reset both values to .3756 What gives???? I've deleted and recreated the hole, edited it about 10 times, and still the same effect.
View 2 Replies
ADVERTISEMENT
Feb 5, 2012
I'm trying to get hole tolerance by Inventor API using c++ but the value returned is not correct.
the code is:
Parameter* diam = m_Feature->GetHoleDiameter(); // m_Feature is a given HoleFeature
double tol = diam->Tolerance; // returned 1.0
BSTR str = diam->Tolerance->HoleTolerance; // returned "0".
// The correct value is 2.89
How can I get the correct tolerance value?
View 1 Replies
View Related
Jan 11, 2014
I have the simple (for you ) question about hole tolerance window: I want to open hole tolerance dialog box and "click" OK button (ofcourse I want to do that via VBA code). Only this, I wouldn't change tolerance type or value of tolerance.
I show you what I want on screen.
View 1 Replies
View Related
Nov 2, 2011
I'm still learning autodesk inventor, I have problem about tolerance. My tolerance more big than my primary dimension. How to edit this text..? or how to reset style editor for factory setting..?
View 1 Replies
View Related
Sep 10, 2013
In the part attached you can measure the hole diameter of the thread M20x2.5
It is 17.294, but the smallest diameter, the tap drill, in the Thread.xls file is 17.5
View 2 Replies
View Related
Jul 15, 2013
I want to make a part with two intersecting holes. The first one is threaded with a 3/8 BSP thread, and the second hole is just a normal unthreaded one with the same diameter as the first.
Normally, if I was making two unthreaded holes with the same diameter I would define a parameter called 'holedia' or something and link both holes to this parameter so I can change it easily if I want; no problem.
But because this time it's a threaded hole, I can't specify the diameter. I don't know what it is because Inventor just looks up '3/8 BSP female thread diameter' in some table. So what do I reference as the diameter of the second hole?
At the moment I'm just looking up a chart of BSP threads on the internet and entering the major diameter manually, and this works although it's a bit of a hassle. But if I wanted to change the hole to 1/2 BSP; I'd have to go back on the internet and find the new diameter to use for the second hole.
There must be a way to 'parameterise' the Inventor-generated diameter of the first hole, and then reference this for the second one, isn't there?
I tried making a driven dimension linked to the first hole and referencing this in the second, but this didn't seem right and it wouldn't update itself when I changed from 3/8 to 1/2.
View 6 Replies
View Related
Apr 3, 2012
Autodesk Inventor 2010 .idw - How do I attach a Datum Identifier symbol to the bent leader of a hole or diameter callout such that when the dimension is moved, the symbol will follow?
View 1 Replies
View Related
Mar 1, 2013
Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
View 6 Replies
View Related
Nov 6, 2012
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
View 5 Replies
View Related
May 22, 2012
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
View 9 Replies
View Related
Nov 19, 2012
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
View 7 Replies
View Related
Nov 28, 2012
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies
View Related
Oct 19, 2012
I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies
View Related
Apr 27, 2012
I have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies
View Related
Aug 28, 2013
i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
View 1 Replies
View Related
Jun 17, 2013
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
View 2 Replies
View Related
Sep 13, 2013
I have a drawing I am trying to ordinate dimension and I was wondering if it was possible to place a symetric tolerance for a dimension on a second line under the actual dimension?
View 6 Replies
View Related
Apr 30, 2009
While looking at the different tolerance methods, I see a couple called MIN and MAX, which just tack these words to the end of the dimension. Is there a way to customize the tolerance methods to add suffixes or prefixes to dimensions, such as TYP or 2 PLCS or something like that, so that I can minimize my detailing time.
View 5 Replies
View Related
Dec 6, 2013
Seeing the behavior for these symbol alignments, preferably also in earlier version of inventor?
Unable to display content. Adobe Flash is required.
In the video i'm showing an A2 sized sheet, the effect is less apparent on smaller sizes but still noticable.
But i'm mainly trying to establish if this is worth opening a support ticket for...
Using IV2014 Pro SP1 update 1, Win7-64bit
View 2 Replies
View Related
Jan 10, 2014
Whats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
View 1 Replies
View Related
Jan 30, 2008
Is it possible to set the default tolerance of a part via the API? If so ,How? Also, how would I ensure that those values are used in the drawing dimensions. I don't see any link to the values that I put into the model and the dimensions in the drawing.
View 3 Replies
View Related
Apr 13, 2011
When I export .idw in autocad .dwg, the tolerance text height of dimensions with 'Limits/Fits-Show tolerance' change, becoming the same of the dimensions text, while the tolerance text height of dimensions without 'Limits/Fits-Show tolerance' remain the same of the .idw file. Why? There's something I can do, to ensure that text height no change? See the attached pictures that show the problem.
I use Inventor 2011 with SP1.
View 6 Replies
View Related
Feb 14, 2005
Any method to set all the Tolerance Types for a GeneralDimension via VBA.
The Tolerance object, accessible via the GeneralDimension object, offers methods to set Deviation, Fits, Limits & Symmetric tolerance types, but I can’t find a way to set other Tolerance types, such as Reference, Basic, Max & Min
View 3 Replies
View Related
May 22, 2013
I've got an iFeature created that's very handy. It's basically a reamed hole with a counter bore for a purchased locating pin.
Here's the rub: Is there a way to specify a tolerance to that hole that will come through the i Feature? As in, I can draw the hole with a diameter of 0.501" within the definition of the iFeature. That's easy. However, when I do a print, I'd like to be able to just snap a leader to it that will have the "Use Part Tolerance" box checked and will reflect the correct tolerance.
As an aside, one of the reasons I want to do this is because I use Hole Tables a lot. In a hole table, I can manually go in and change the call out for the hole to show the correct tolerance, but in order to keep the grouping together, I have to do EVERY hole individually.
View 1 Replies
View Related
Jul 28, 2010
All the values I put in to set my tolerance are being rounded to three decimal places even though the value is four place and I am setting the dimension precision to four place.
For Example: I have a hole of diameter 2.0466. It is to have a tolerance of +.0005/-.0000. When tolerance.setToDeviation is called, the .0005 is strangely forced to .001 and is set as this in the part file. The precision value had already been set to 4 at this point.
I am using the following code in Inventor 2010:
'Create hole feature
Call oCompDef.Features.HoleFeatures.AddDrilledByThroughAllExtent(oLinearPlacementDef, dDiameter, kExtentDirection)
'Get hole feature just created
Dim oHole As HoleFeature
Set oHole = oCompDef.Features.HoleFeatures.Item(oCompDef.Features.HoleFeatures.Count) ' need most recent index
[code]...
View 3 Replies
View Related
Jul 8, 2013
I need to change one dimension using iLogic. It changes due to the path taken to manufacture the part. In a nutshell majority of the time the "OD" has a +.004 / .000 tolerance and the model is drawn at the minimum size. There are cases when the "OD" has a +.005/-.005 tolerance and is modeled at the nominal size. I've learned some of the iLogic to make the change I'm after but not all. I'm having trouble setting ModelValueType to change the model size.
See the code below, for setting +/-.005"
IV2012
View 2 Replies
View Related
Nov 18, 2011
how to create a compsite position tolerance with the Feature Control Frame command? (See attachment)
View 2 Replies
View Related
Oct 4, 2010
Is there a way to define the export tolerance of a step file? Now the tolerance is always set to 0.01mm but i need a tolerance of 0.001 to go further in another CAD / CAM System.
View 6 Replies
View Related
Jul 22, 2013
I have noticed that as I increase my tolerance value in CONTACTS in the simulation settings my results will dramatically change.
My initial settings are 0.004" with SEPARATION as default. After completing the automatic constraints, I will manually bond all the necessary components such as nuts to bolts and welds to the plates.
Then if I change 0.004" to 0.5" and leave it as SEPARATION, to pick up clearance holes, etc., the result will resemble the way the assembly should behave.
But if I change the separation to 1.0" (and nothing else) then the simulation will run with results that are not correct, giving large deformations and very high stresses.
View 1 Replies
View Related
Aug 7, 2013
When a Basic Tolerance is used to dimension - can the size of the containing box be adjusted?
I understand this is set as a percentage of the text size - where is this value & can it be edited?
View 1 Replies
View Related
Jun 14, 2011
When i create a part in inventor, and create a rule for my part list of my drawing. Where do i find the diameter character
PL-5 Ø 300
View 4 Replies
View Related
