The command line window moved from the default location at the bottom of the screen to a floating position while I was working on a drawing yesterday. I don't know what I did but can't move or resize to get it back down to the bottom where it belongs. I can get it to dock to the left and right or float but nothing else. It doesn't behave like the the other palettes n that I can't seem to drag it anywhere.
View 9 RepliesCivil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
I can't find my Command Line Window. It somehow became undocked and is no where to be found on my screen. It does not appear to be floating anywhere. I've gone through all my display settings; however it says that it should be there and show 3 lines of commands.
View 9 Replies View RelatedAn example is when I'm drawing a box, line etc and attempt to type "@5,-5", AutoCAD somehow jumps to a window on the side and if I don't notice will restore the window I'm working in and not complete the command I typed ("@5,-5" in this case). If I do notice in time, then I have to pres ESC about 3-4 times, which will then have me back on the command line with the text "@5,-" already typed (as if that was were I paused while typing??). The attached picture shows the dialog box on the top left, and the command line as if I've only typed "@", when after pressing ESC as mentioned the full "@5,-" text becomes visible on the command line?
Also, as a note: I've already ruled out that I'm pressing other keys that could possibly cause this...
I'm running AutoCAD (Mechanical) 2011
My command bar will not dock down at the bottom like the old style autocad (I don't care for the new semi transparent deal as its always in the way). I can dock the command bar but the next time I open the drawing or autocad for that matter it is back floating again?
View 1 Replies View RelatedThe options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedMy layers dock has gone missing. According to the list in my 'Windows' tab, it claims to be open. I have looked all over the screen. I have switched on and off again etc. I have even deliberately thrown other docks off the screen to see if they come back to normal screen area if I close and reopen Gimp- and they do. so it isn't lost off screen.
I have unistalled and re-insalled and it has not come back.
1. Go to Windows>recently closed docks - Mine says 'empty'
2. File>create docks - I don't have this option- mine choices are 'new', 'create', 'open', 'open as layers', ''open location', 'open recent'... then a few which pertain to having an image open that you're working on... then 'quit'.
3. I went to Youtube and the tutorials on how to make your Gimp like Photoshop and how to get back closed windows also haven't worked.
I'm on Gimp 2.6.
When I open Illustrator CS6 on my Mac/10.7, there are two toolbars locked up top, which is fine. I want to dock my illustrator window to those like I can in InDesign. How do I do that?
View 3 Replies View RelatedI could do this in earlier versions, but it doesn't seem to work in Photoshop CS-6. How do U reposition a floating dock in CS6 so it is anchored to the upper right edge of the window?
View 2 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
I need to programmatically change the 'Window command' (Commande de fenêtre in French) color. I didn't find anything in Application.Preferences neither in the registry.
By 'Window command' I'm talking about the feature comming with A2012 displayed in the upper left corner of model space windows:
I noticed that when I open the command window with F2, the scroll bar is missing
I suppose there's some new variable in 2013 that has to be set but can't find it
it does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedInstead of a window popping up with the hatch settings, I just get the following in the command prompt:
Pick internal point or [Select objects/settings}:
what might be causing this?
How to have “window” selection when using the “adjust space” command?
I’m wondering if there is a way to select all the dimensions needed to be adjusted in one go instead of selecting them one by one.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
get the view command back on the list of menu commands as i seem to have lost it.
View 3 Replies View RelatedWhen I run the DI command and specify two points, it gives all the details including the distance between the points in the commandline.
Is there any way (may be using cui or lisp) so that the same result appears in form of a popup window??
as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
With the command window displayed at the bottom of the screen, everything slows down. The cursor momentarily freezes and it takes a second or two for commands to be fulfilled. Also, the command window is about 7 lines high; in the past, I have shrunk it to maybe 3 or 4 lines but I cannot shrink this wndow.
Then, when I push control-9 and the window disappears, everything speeds up to normal!
I tried turning off my internet connection and my McAfee Viruscan as well. Running without the command window makes it hard to draft. Since I type shortcuts, I figure I must have hit the wrong key and unleashed something unspeakably terrible.
I am running AutoCAD version 10 on my PC, with Windows XP Professional.
I wrote some LISP programs. I would like to use the output data generated by LISP program in Command arear of AutoCAD. I Heard we can dave the output data into .dat files.
View 9 Replies View RelatedSuddenly, the multi line text editor in no longer displaying when I select "new" from within the DIMEDIT command. I'm presuming that there is some sort of system variable that controls this, but I have not been able to find it in the help files. The Mtext editor is working from the Mtext command, so I know it's not the DTEXTED variable.
View 6 Replies View RelatedWe created an sdf of contours. We are using mapi.port to try to bring some of those contours into another drawing. We indicate the crossing window, but only those lines entirely inside the window come into the drawing. Any line that crosses the window are not included.
We draw the window from left to right.
Why aren't we getting all the lines that cross the window?
I am new to autocad, and just want to know what the dotted line in the paperspace window represents, and if I can move it, adjust it, hide it or delete it? Also, does it show up if I print the sheet?
I have pasted a title block from another drawing onto it, and it doesn't quite fit.
I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedCommand line for Dimension Fit
View 1 Replies View Related