My command bar will not dock down at the bottom like the old style autocad (I don't care for the new semi transparent deal as its always in the way). I can dock the command bar but the next time I open the drawing or autocad for that matter it is back floating again?
View 1 RepliesThe command line window moved from the default location at the bottom of the screen to a floating position while I was working on a drawing yesterday. I don't know what I did but can't move or resize to get it back down to the bottom where it belongs. I can get it to dock to the left and right or float but nothing else. It doesn't behave like the the other palettes n that I can't seem to drag it anywhere.
View 9 Replies View RelatedCivil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
When i go to use the rad or dia. command, and i click on an arc surface (in paper space) the rad dimension will jump to the nearest arc, not the arc that i need dimensioned.
View 3 Replies View RelatedI've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedToday 2013 returns "Command: _cui Unknown command "CUI". Press F1 for help." from the command line. menu and ribbon. What a mess 2013 is! Defeitely not worth the miniscule improvements.
View 5 Replies View RelatedI am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies View RelatedI am using AutoCad Mechanical 2013. I am trying to section in 3D but, when I press the Section Plane tool, it doesn't respond. See the picture below. At the bottom of drawing area its says "Command: _sectionplane Unknown command "SECTIONPLANE"."
View 2 Replies View RelatedI have a drawing that was drawn in 3D CAD and I need to convert to 2D CAD. I changed the view, but I cannot remember what the command is I need to type in to change to 2D.
View 3 Replies View RelatedMy command prompt window position moved to top left corner. Want to move back to bottom left corner.
View 1 Replies View RelatedI installed the language pack, on my original autocad 2013(Chinese) has the ribbon, and the "RIBBON"command works, but on my another language pack autocad 2013 (English) there is no ribbon and the"RIBBON" command does not work, tells me ribbon Unknown command "RIBBON".
Does the ribbon function not work on the language pack autocad one?
i use the hplayer command which changes the layer when i open the hatch command. i am sure when i closed it in the past it then changes the layer back to my current layer. now it gets stuck on my 'hatch' layer and i have to manually change the layer to 'current'.
is there a reactor or is it part of the command?
I noticed that when I open the command window with F2, the scroll bar is missing
I suppose there's some new variable in 2013 that has to be set but can't find it
I turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
I can use xrefs on different project but right now on autocaddLT 2014 it doesn't work.
View 9 Replies View RelatedI used the CHANGESPACE command today to bring a piece of mtext from model space to paper space. I had a background mask on the mtext and when it came into paper space, the height of the text box displayed right but the width stayed the same as it was in model space. I played around with column settings and also the WYSIWYG in editor settings. Nothing seemed to make difference. What am I missing? Using autocad 2014
View 7 Replies View RelatedAs an Autocad user since Rel. 2.1. My favorite is when attempts to draw a line using feet and inch input while units are set to decimal. How "Point or option keyword required" is supposed to guide using the correct units setting? With DYN Input on, the red outline offers even less information. Are the prompts user editable?
View 4 Replies View RelatedWhat is the command to turn of fblips in ACAD 2013? In ACAD 2011, you can set BLIPMODE to OFF. But that command is not recognized in 2013.
View 2 Replies View RelatedIs there a way to set a profile by the command line instead of through OPTIONS? I'm contract and do not have admin rights on the PC so I can't change the startup target to my profile.
I can write a script to make the changes I need at every startup but can't find the profile setting command/variable.
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies View RelatedAfter installation of the AutoCAD 14 and setting up drawing parameters to support the .dwt template, from the Format menu, tried initiating the units, points, table style, and layer states command but get a prompt for indicating for example: "units" unknown command, "DDTYPE" unknown comand, etc.. What setting do I have to adjust in order for these commands to work?
View 4 Replies View RelatedWith the Isolate Object command is it possible to have the objects that get hidden remain in the workspace "faded" like when editing a reference in place?
View 6 Replies View RelatedI wanna create a command to put in the LISP file. Bascially when I type XV or XH a vertical or horizontal xline will be created and automaticlly put on defpoints layer.
My former office had this and it was very slick and was wondering if I could ad it to my new office
I want to hide all layers through scripting. Firstly I have to select all layers for the same.
So, what is the command to select all layers?
I want record a macro to update a title block. We've revised the formatting of our title block. The block name is the same, only some appearances change.
I noticed in the insert command, "You can replace an existing block definition with an external file by entering block name=file name." This would be great. I could just type in the block name and the file name and AutoCAD would replace the current with the new version in the file. Then do an ATTSYNC and we're done.
*EXCEPT*
The path and the block name both have spaces in them. Is there any way to make AutoCAD stop taking the space as a return?
I have a problem with the Send Command, when I use it the email is sent without text.
View 9 Replies View RelatedWhen I initiate the trim command with a double enter (i.e. select all mode), I usually first zoom into the area I want to trim so I see no other objects, then start the trim <Enter><Enter> option, then pick the lines I want to trim. Even if these extend off the screen and cross other objects (not seen on the screen), they usually trim off completely. However, on occassion they don't. To replicate the problem try this:
Draw 2 vertical lines and 2 horizontal intersecting (like noughts and crosses)Draw a horizontal line that intersects both vertical lines but up near the top of those linesZoom in so you only see the square and extending lines (but not the short horizontal line)Trim <Enter> <Enter> and pick from bottom right to top left (i.e. around the squareZoom out.
The square is trimmed, however there are 2 line fragments left above the horizontal short line.
Fix: UndoTrim the same way and presto, it now works I found if I then moved the line above (so only a small amount), zoomed in again, tried to trim - same error.
Having trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies View RelatedI have AutoDesk 2013 install on my computer and when I use MVSETUP, "Unknown Command" show up.
View 6 Replies View Related