hey there i have an issue i cant resolve i am working on this project and i want to remove the decimal digits as shown in this picture "L=50.000" i want it to be L=50.0 also S=0.000 i need it to be S=0.00
how to shorten these numbers? by the way this is a pipe label
I have these point numbers. Then I add some points. Then I want to renumber all points 1-9 since there is nine points.
1-1
11-2
2-3
3-4
4-5
5-6
12-7
13-8
6-9
Is there any method using any APIs?
I have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?
View 4 Replies View RelatedStandard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
Where do I go in Autocad 2000 to change from decimal dimensions to fractional dimensions.
View 4 Replies View RelatedInventor 2010
- I have drawing partslists with parameters that change automaticly
- Based on a main assembly with a customized structured BOM, with information I fetch from the individual parts exported parameters (Ex. =Length <part-length>)
- The main assembly is based on many sub-assemblys
- Based on "Make Component" skeletonmodels
- Based on embedded EXCEL worksheets in where I control my parameter values.
Now the problem expl.:
- Total I have about maybe 50 parts, witch have 15 parameters each, that I need to control this way.
- In every single part I have derived it's parameters from the skeleton part, and exported them.
- On some parameters I don't want to show the units, in most of the parameters I don't want the trial zeros.
So in the individual parts parameter table I choose "Custom Property Format" for the exported parametern in every individual part.
-uncheck "Trailing Zeros" and check "Apply to existing...", then uncheck "Unit String" for some parameters.
I lot of setup work with 50 parts, 15 parameters each (750 individual parameters).Every time I change a dimension in the embedded EXCEL worksheet, ex. a pipe dimension and thickness, a diameter for a revolved feature and so on, the units go back to it's default values again and I have to do all this parameter setup "Custom Property Format" again.
Tried the new geolocation today, and found the position markers to be quite useful.
However... Using WGS 84, they only show the latitude/longtitude with 4 decimals. And 0.0001 degree is about 11 meters in real life, so... I was hoping there was a setting to give me at least 5 decimals here.
I need to show fractions on my drawings rather than descimals.
I have gone into the style manager and have units in inches
I have linear format in diagonal fractions
I have precision at 1/16
I have also made several other changes to centerline color and hidden lines color etc.
I choose save
I choose done
On the drawing, the color changes are made but the dimension still reads in descimals.
How do I get fractions to be applied to the dims on the drawing?
Is there a way to chage the default setting to always go to all or at least 5 decimail places?
When I take a measurement, I would like to get a more accurate result than 3 decimails, and it's a pain changing this in every part or assembly.
Is there any way different than drag and drop for moving pages in multiple pages designs. I have some presentation designs lately and have to change pages numbers or move multiple pages.
Drag and drop is not user friendly on 30-50 pages documents.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I need
(distof "..")
and
(rtos ..)
as a prompt (VB window or command line).
::Basically I need to push button (my custom command with function like: ^C^C_f2d; - fraction to decimal) and invoke the routine to enter fraction or decimal to bring either
15.125" - will be 1'-3 1/8"
or
1'-3-1/8" - will be 15.125"
same as:
Command: (rtos 15.125)
"1'-3 1/8""
and
Command: (distof "1'-3 1/8")
15.125
but instead of typing (...) I want pop-up texbox for input, or just simple input: 3/5" in command line to get 0.6 .
I always used the number keys to set opacity in brush tool. Suddenly it now affects flow, not opacity. At the same time this functionality changed I started having to click on a mask for the [ ] keys to change brush size. I used to be able to change size without selecting the mask. Did I inadvertently change some setting? I am using CS5 12.0 x 64 on Mac in 10.6.8.
View 2 Replies View RelatedHow do you format cells in a table to show numbers as 3-digit decimals? I've tried this...
myTable.Cells(r, c).DataFormat = "#0.000" ' this does not work.
Is there more to it than this?
why won't my line spacing change even after I change the # in the leading pane
View 3 Replies View Relatedis it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
I have a question about profile table.As I indicated in this picture, I wanna to have 2 different number for each profiles but this table repeats only EG number.
View 4 Replies View Relatedwhen i write 8,45 it writes 8. i can't use decimals suddenly
View 9 Replies View RelatedI used to enter decimals with the dot key. On my new environment (new computer, new version of Illustrator), it no longer works. I would like to use the comma key instead. What may be the way to enable it? Some editing on Window's international options?
I'm working on Illustrator CC (64 bit), Windows 7.
I have a method to create new point group.
In this method I add as parameter one vector which contains point numbers.
string Numeros_Incluidos = "";
//buscamos todos los number point según su id y creamos una cadena string
foreach (uint NP in listaNumberPoints)
{
Numeros_Incluidos = Numeros_Incluidos + Convert.ToString(NP)
[Code]....
I create a string called "Numeros_incluidos" that it is a chain of all numbers.
e.g:
"1,2,3,4,5,9,10,11,15,18,21,22,"
However I would like to create one function to create this string more organized as:
"1-5,9-11,15,18,21-22".
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Creating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
Any way to generate liework with point numbers. I have survey data of a pipeline and all the points are in order, if there was just a way for linework to connect them by increasing point number in my drawing?
View 3 Replies View RelatedI just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.
Attached is an image of my screen.
I am adding curve label numbers to a parking lot to create a table with the curve delta/radius. My problem is that #9 is being skipped. Its going right from 8 to 10.
View 3 Replies View RelatedI assume the curb box is included (or not) depending on the casting number? How is something like 3067 handled, which comes with and without a curb box?
View 2 Replies View RelatedWhy I get this error when trying to enter a curve number?
View 1 Replies View RelatedI am trying to set several hundred points along polyline verticies with the point number starting at 5000. There are no other points in my drawing, yet everytime I start the process, it begins at 1. I have set 5000 at my Next Point Number under Point Identity in the Create Points toolbar. I have also verified that the 'Save Command Settings" is set to yes under the 'Commands-Create Points'. We cannot get this to behave as desired.
This is a 2D polyline with no elevations.
What is the Revision Number field in Surface Statistics for and how/when is it populated?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there a way to determine the number of styles in a drawing?
View 9 Replies View RelatedI have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
When working in the "Layout" when I want to work with the "viewport" always a window "Resource Manager Error" that says "Unable to find a row with the number 25900 in the resource AecXDisplayPropsData60" and one key "OK" Click the window again propodaet but when I try to work with the viewport poevlyaetsya again.
View 3 Replies View RelatedHow do I change the number of section views per row/column when using the create multiple section views command? It's defaulting to 8 per row.
View 9 Replies View Related