AutoCAD Inventor :: Dimensions - Change Decimals To Fractions?
May 11, 2012
I need to show fractions on my drawings rather than descimals.
I have gone into the style manager and have units in inches
I have linear format in diagonal fractions
I have precision at 1/16
I have also made several other changes to centerline color and hidden lines color etc.
I choose save
I choose done
On the drawing, the color changes are made but the dimension still reads in descimals.
How do I get fractions to be applied to the dims on the drawing?
View 7 Replies
ADVERTISEMENT
May 4, 2012
I have been working 4-weeks for a new customer. I Run Inventor 2011 mechanical... I have multiple iwd files that have all been done in decimals. The floor workers here want fractions to the 1/32. Is there a easy way to up-date my entire list of drawings with out creating new? Is there a easy way to create a style that I can easily switch to when I draw/design for this customer. I hate fractions!
View 5 Replies
View Related
Dec 4, 2012
Where do I go in Autocad 2000 to change from decimal dimensions to fractional dimensions.
View 4 Replies
View Related
Apr 23, 2013
I need
(distof "..")
and
(rtos ..)
as a prompt (VB window or command line).
::Basically I need to push button (my custom command with function like: ^C^C_f2d; - fraction to decimal) and invoke the routine to enter fraction or decimal to bring either
15.125" - will be 1'-3 1/8"
or
1'-3-1/8" - will be 15.125"
same as:
Command: (rtos 15.125)
"1'-3 1/8""
and
Command: (distof "1'-3 1/8")
15.125
but instead of typing (...) I want pop-up texbox for input, or just simple input: 3/5" in command line to get 0.6 .
View 3 Replies
View Related
May 23, 2012
Is there a way to chage the default setting to always go to all or at least 5 decimail places?
When I take a measurement, I would like to get a more accurate result than 3 decimails, and it's a pain changing this in every part or assembly.
View 2 Replies
View Related
Aug 15, 2011
Inventor 2010
- I have drawing partslists with parameters that change automaticly
- Based on a main assembly with a customized structured BOM, with information I fetch from the individual parts exported parameters (Ex. =Length <part-length>)
- The main assembly is based on many sub-assemblys
- Based on "Make Component" skeletonmodels
- Based on embedded EXCEL worksheets in where I control my parameter values.
Now the problem expl.:
- Total I have about maybe 50 parts, witch have 15 parameters each, that I need to control this way.
- In every single part I have derived it's parameters from the skeleton part, and exported them.
- On some parameters I don't want to show the units, in most of the parameters I don't want the trial zeros.
So in the individual parts parameter table I choose "Custom Property Format" for the exported parametern in every individual part.
-uncheck "Trailing Zeros" and check "Apply to existing...", then uncheck "Unit String" for some parameters.
I lot of setup work with 50 parts, 15 parameters each (750 individual parameters).Every time I change a dimension in the embedded EXCEL worksheet, ex. a pipe dimension and thickness, a diameter for a revolved feature and so on, the units go back to it's default values again and I have to do all this parameter setup "Custom Property Format" again.
View 2 Replies
View Related
Jul 5, 2012
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
View 2 Replies
View Related
Oct 28, 2012
I use autodesk inventor proffesional 11 and when I try to change the dimensions it dosent work.
View 3 Replies
View Related
Mar 7, 2012
how do i change the dimensions from inches to cm on autodesk inventor?
View 1 Replies
View Related
Mar 14, 2012
How can I change the precision of Driven Dimensions. I have a Driven Dimesion in a sketch that I want to use in another dimension later. Let's say that d59 is a Driven Dimension.I want dimension d80 = d59*2. When I measure it using eight decimal places, I can see that it is rounding d59 to 3 decimal places, but I don't want it to do that because then d80 is off.
View 7 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Jul 12, 2013
I mean the dimensions in sketches in a model part, not the drawing dimensions which are controlled by styles .
View 1 Replies
View Related
Dec 3, 2011
I'm in sketch mode and my drawing dimensions are all in decimal format. How do I change that to a fractional format?
I thought it would be in the styles editor, but when I open that up, I don't see ANY dimension style listed (see picture). I also tried right clicking the actual dimension to view the properties, but that only lets me change the decimal precision (also attached). The help file mentioned the "ANNOTATE" tab, but I don't even have that tab on my ribbon so I'm guessing it's unique to autocad?
View 9 Replies
View Related
May 15, 2012
I teach 8th grade tech and we use inventor I needed to display in fractions went to help menu. told me to go to styles & standards and then to styles editor as the help menu says and in the dialog box on the right is the browser it has in it color, lighting, & material. the help menu says there should be dimension to change the style to fraction but it not there.
View 9 Replies
View Related
Apr 6, 2011
My Inventor's playing with me... When I use Leader text and type a fraction, a message box pops up asking me if I want to stack the fractions. I don't, which has always been the default, so I just hit "Enter". Suddenly, it's decided to go ahead and stack them, and now the box does not come up, so I can't tell it not to. Where do I choke it to get it back to not stacking the fractions, or at least give me the option box?? R2010, S.P.0.
View 4 Replies
View Related
Aug 7, 2012
Is there some super secret option for making fractions in the drawing environment round up to the nearest, for example, 1/16th? There has to be, there just has to be.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 4 Replies
View Related
Aug 8, 2012
I found out that if you have a dimension that is keyed you cannot use the custom property format in the fx. so how do I get ilogic to convert to fractions rounded to a 32nd.
When I put this (see below) in my code it changes my custom iproperty to a yes-no
fractionString = RoundToFraction(Dim_F, 1/32, RoundingMethod.Round)
Here is my code that drives my table in a drawing but the dimensions come as decimal and I need fractions.
If Hole_F_Type = "NONE" TheniProperties.Value("Custom", "F")= "-"ElseIf Hole_F_Type = "2-Hole" TheniProperties.Value("Custom", "F")= Parameter("Dim_F")ElseIf Hole_F_Type = "S1" TheniProperties.Value("Custom", "F")= "S1"& "-" & Parameter("Dim_F")ElseIf Hole_F_Type = "S2" TheniProperties.Value("Custom", "F")= "S2"& "-" & Parameter("Dim_F")ElseIf Hole_F_Type = "S3" TheniProperties.Value("Custom", "F")= "S3"& "-" & Parameter("Dim_F")End If
View 1 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Aug 22, 2012
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
View 9 Replies
View Related
Sep 22, 2013
hey there i have an issue i cant resolve i am working on this project and i want to remove the decimal digits as shown in this picture "L=50.000" i want it to be L=50.0 also S=0.000 i need it to be S=0.00
how to shorten these numbers? by the way this is a pipe label
View 1 Replies
View Related
Apr 25, 2013
Tried the new geolocation today, and found the position markers to be quite useful.
However... Using WGS 84, they only show the latitude/longtitude with 4 decimals. And 0.0001 degree is about 11 meters in real life, so... I was hoping there was a setting to give me at least 5 decimals here.
View 4 Replies
View Related
Apr 18, 2013
I was given a drawing and asked to scale it down. Once I did everything scaled as it should except for the dimensions. The dimensions did not change. What gives?
View 9 Replies
View Related
May 9, 2013
Have been successfully using annotative dimensions for A LONG time, upgraded to 2014 and now all the dimensions have randomly been changing themselves to annotative$0 instead of annotative..Can change them back to annotative using properties but even new dimensions come in as annotative$0.
View 0 Replies
View Related
Apr 22, 2010
How do you format cells in a table to show numbers as 3-digit decimals? I've tried this...
myTable.Cells(r, c).DataFormat = "#0.000" ' this does not work.
Is there more to it than this?
View 7 Replies
View Related
Sep 22, 2011
I'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
View 8 Replies
View Related
Nov 24, 2012
I trying to change dimensions but they will not change.I add a block and then try to dimension it against another block but when i go to change the dimension it just remains the original dimension size. E.g. it currently is 2.895 and i go to make it 3.00 but it does not accept the new dimensions....is there a setting i could check?
View 3 Replies
View Related
Oct 19, 2012
when I explode a cad detail the dimensions change. How can a revert these back to the original dimensions before they were exploded? I need to work with the exploded detail so i can make changes....i use cad14.
View 4 Replies
View Related
Nov 17, 2011
When I use slice command in a 3D model, after separation into two parts, each part can't editable, you can only move them.
You can see in arrows on # 1 and # 2 3D model, but after using separate into it two parts by slice command , these arrows are disappeared.
How can I see arrows again to change dimensions of 3D model easily?
I hope that you can understand what I mean. [URL]....
View 8 Replies
View Related
Jun 21, 2012
I just tried to assemble my model and realized that I should make the dimension of the door 0.06" larger in order to become closed! It took me a week to complete this model, so I don't wanna redraw everything! How can I modify my model in CAD?
View 9 Replies
View Related
Sep 12, 2011
I am currently working on the drawing which I initially didnt have a template for (ie the border for the A1 page this drawing will be printed on) so off I went and started drawing using a scale of 1 drawing units = 1mm.
Now I have been given the border and the drawing I have comes no where near fitting on the sheet so I want to select all of the drawing and change the scale but I obviously don't want the dimensions to change. How can I achieve this?
I also need to know as there are certain parts of the drawings that need zoomed in views so all I want to do is copy the parts I have drawn and increase the scale but again keep the dimensions the same.
View 9 Replies
View Related
Oct 28, 2013
See the attached JPEG files for a viewable explanation.
Dimensions placed in paperspace that are scaled by the viewports, change on their own. This happens at no apparent frequency. And for no apparent reason.
This has happened after I've saved a drawing and reopened. Also has happened when I've moved or stretched a viewport.
Currently I am using Autocad 2012, but this has been happening for some years.
View 1 Replies
View Related
