How do you format cells in a table to show numbers as 3-digit decimals? I've tried this...
myTable.Cells(r, c).DataFormat = "#0.000" ' this does not work.
Is there more to it than this?
I was almost sure it was an easy task but I cannot find a way to format numbers in a table cell. All I want to do is to use the DECIMAL alignement in table cells containing prices.
But it works only when the number are specified in the format ####,00. If you need a number like #.###,00 you have to insert a dot in the numbe and Boooom Ventura (correctly) treats it as text .
So, my question is: is there a way to type 1000,00 and get 1.000,00 correctly decimally aligned? Here is what I'm trying to get (fixed width font):
10,00
100,00
1.000,00
I have this table that's reading my table style. All cell formatting is set to General and middle center justification.
When I type in a number the formatting automatically changes from General to Whole Number and upper right justification. When I type in letters everything it fine.
Why using numbers changes the formatting? In the textstyle I have changed the cell formatting to Text but that doesn't work. If I select the table, right click and choose Remove Overrides it moves the numbers to Middle Center as set in the style.
is it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
I've created the attached table (used as legend in drawing, to point out revisions).
Cells in second column from the left are set as data dd/MM/yyyy, so when I change revision I write current data and it give correct format.
The problem is that every time I change layout and come back (or every time I open the drawing), data in empty cells were set to 01/01/1970...but I want them empty.
If I clean them, I clean also the data format.
What I'm trying to do is to use set cell background color to change the color based on whether or not there is text in the particular cell.
I want LtCol to be 161 and HvyCol to be 211, and I'm not sure how to set this up...all it does at the moment is change the color to black.
My code so far:
Dim TableObj As AcadTable
Dim EntObj As AcadEntity
Dim i, j As Long
Dim LtCol As AcadAcCmColor
Dim HvyCol As AcadAcCmColor
[code]......
I'm trying to make a BOM using a Table. I want to be able to export. I cannot seem to keep the formatting in the length column. I would like it to read feet & inches (example 5'-4 1/2"). These lengths will change often during the design process. The problem I'm having is when I clear the cell contents or delete the information the formatting does not stick. I've tried locking the cell format but that doesn't seem to work. I've attached a file with the table.
View 8 Replies View RelatedI have a drainage structure table for a leaching system. I used some expressions to calculate some of the leaching pool values for the Top Of Rings etc. When the expression is false I get a zero. The expression work as expected, and I anticipated manually wiping out the false value, but when I wipeout or solid mask the values in MS they don't line up in the view port. How to effectively wipeout structure table cells?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I simply want to paste a series of cells from excel into an existing autocad table. About 8 rows, 1 column thick. I want the values to acquire the destination formatting too if possible. I do not want to create an OLE object or anything fancy. I have seen instructions to use "Paste Special" on forums, but I do not have this choice when I right-click. I'm sure this is possible.
View 8 Replies View RelatedI created hole table but i unable to merge the cells. but i need my output will be as per the input. How to make sure it is possible to give inventor 2011 & 2012.
View 6 Replies View RelatedI've started having problems when trying to edit text in table cells. Sometimes I double click and all is ok. Sometimes it wont let me select anything in the cell. Sometimes I have to select the cell, then right click to edit text. I get this message:
Command: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner:
Is this likely to be a hardwear issue, and the pc is struggling to run AC correctly with all the other crap my company has running in the background? Or is there a systems setting that may have been changed, for whatever reason?
I have two tables in a drawing one of the tables has all my info and formulas. The second table has cells that are linked to the first table cell content. All works great except I need to add rows to the table with the linked cells. When I add the row this causes the row number to change. I have tried using the $ like you do in excel but that has no effect. I do not want to link my tables to an excel spread sheet because we use VAULT as our storage and it is really finicky when checking in drawings or checking out drawings.
View 0 Replies View RelatedRAW files (Red) no longer show their filenames in the Library Grid Compact Cells view (now just shows numbers)!
JPGs (Green & Blue) show nothing at all, including ratings and Pick status, and the Develops are gone.
This was after having imported a LR3.6 catalog and intermittently using it for a month.
Data:
- Catalog is over 1GB in size, over 50,000 images in the Library
- Windows 7 x64 with SP1
- LR4.0 x64
I have not yet tried:
- Re-importing the LR3 Catalog backup to see what happens.
- Creating a new LR4 Catalog and see if it displays the data in the Grid Compact Cells view
I have tried:
- Optimizing/Integrity Testing the Catalog
Is there any way to compare 2 cells in a table? I have tried diesel
$(if,$(EQ,%<AcObjProp Object(%<\_ObjId 2128896328>%).b2>%,%<AcObjProp Object(%<\_ObjId 2128896328>%).d2>%),true,false)
I can't seem to pass the cells into the equation. I tried formulas also with no luck.
I've been up and down the forums looking for some direction or programming code for this to no avail.
What I'd like to do is edit a table where the cells are populated with fields. I'd like to copy the last row of the table to a new row (fields and all), then change the fields of the row I copied FROM to text, and lock those cells.
I'd like to copy this row including the fields to a new row beneath it. Then edit the cells of the first row to change the fields to text, and then finally lock the cells of the first row so that only the new row would update when the field properties change. Eventually they will be populated with data from the Vault..
The cells of the table don’t respond to the chosen height/length
1.I’m wondering why the cells of the table don’t respond as a particular value is typed for them.
2.Also, If all cells are selected to be given a particular height/width then they don’t respond as well.
3.Originally, the inserted table doesn’t respect the value of width assigned for it!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
when i create a data link with excell, the data link contains pages of unused cells. how do i controll the data link and have it show only the cells desired.
View 6 Replies View RelatedI'm creating interactive PDFs for a client that include tables with empty cells that will be populated afterwards (depending on what information a customer puts in on a form).
The forms are created in InDesign and exported as interactive PDFs, but I need to be able to name the live fields (in InDesign) before I export the Interactive PDF, so that I don't have to select each indivual field in the final PDF and rename them.
The reason I want to be able to do this pre-PDF production, is because the forms will be rebranded over and over again and I don't want to have to rename hundreds of cells time and time again in Acrobat Pro.
The deveopler who's populating the cells already has predefined names for them, so I can's simply give him the names that Acrobat automatically defines.
is it possible to create a style for formating cells in a table in CDX6?I mean to format aligninig, text formating /font, margins and stuff like that?
Now I have to do a infoguide for my city and have to put in a lot of info - restaurants, hotels etc. Probably 300 and more and the best way is to use the great table tool. BUT it will be fatastic if I can format cells with style because with easy I can import xls file in Corel and the good news is that it recognise it as a table so the formating is the next step.After that selecting cells, changing fonts, margins etc. is a painfull job to do.
We use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
In my copy of Lightroom 5.3, image info tooltips do not show in the grid view expanded cells even though that option is activated in view options. Is this an issue with Lightroom 5.3? (Note: Image info tooltips in grid view compact cells and the filmstrip do display, however.)
View 1 Replies View RelatedSo I'm playing around with Inventors Tube and Pipe to show how to do all of our flexible hose routing throuh our chassis. It is a large assemblly with alot of hoses, so it will take multiple views to show how to route all the hoses. I have done all the routing, but am now looking at how to document it.
I have the parts list setup to show each individual run. So for example if my assembly had two runs, my parts list would look like the following:
Item......Qty......Stock Number.........Description
1..........59".......6295645.................Gladhand to filter hose
2..........120"......6295645................Filter to Control Valve hose
Now my idea is to show a couple of ISO views on the front page, along with the parts list. On the ISO views I would make a bunch of Detail Views on the following sheets, and then in each detail view, I will use balloons to identify which lines are which.
Now say ther eare a dozen pages, I don't want people to search all 12 pages just to find which detail views Item 1 shows up in. Is there any way to automatically show in the Parts List that Item 1 is shown on pages 1,2,3,6,7,9,12 and that Item 2 is shown on pages 2,3,5,7,10,11,12? This list would populate based on which sheets have a balloon for that given item number.
Any better way to document hose runs in a large assembly? In the end the goal is so that someone could pick up the drawing package, know they are running the "Gladhand to Filter hose", find it in the parts list, and then flip to the appropriate pages that show how to route that hose.
I set up a pretty little table of contents for a handbook and wrestled the styles into place. But, for some reason, I have two page numbers that are wacked out to the right of everything else.
The page numbers are set up on the master page and are very simple. It's the same master for all of the pages.
There are two styles at work in the TOC, messing with those doesnt change anything.
Why would these two, and only these two, get kicked off their mark?
does number->string have format options? What is the equivalent of "printf" in gimp tinyscheme?
I am scripting adding axes to an image and need to control of format of floating point numbers that will be passed to gimps text generation functions.
I'm using Autocad LT 2012 on Windows 7 Professional. I'm also using Microsoft Office Professional 2010. My question is how to change the colour of all cells in a table at once. For example, I copy a section of an Excel spreadsheet, then use "Paste Special", "Autocad LT entities", to paste it into AutoCad. I would like all the text to be coloured "by layer". If I select all the text and go to "properties", the text colour is set to "by block". I can change this to "by layer", but nothing changes. The only way I can seem to get it to change is by selecting the text in an individual cell, highlighting it, and then changing the colour in the text formatting toolbar. I have to then do this for each individual cell. Is there a way to change them all at once?
View 3 Replies View RelatedI am trying to replace the first 2 numeric digits. I'm pretty sure this is how I used to do it and it worked great before.
View 8 Replies View RelatedHow can I display the object data of a layer in table format, with VB.net. or How can I display the attributes of a .SHP file, edit it and also add new point to it.
View 2 Replies View RelatedIn some cases (especially with files imported from dxf format), the tables of print style are only with .stb extension but I need to use the Monochrome.ctb. How Can I load this table if it doesn't appear in the list?
View 1 Replies View RelatedI have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View RelatedHow to show the sequential numbers on the steps of stair?
I’m wondering if there is a way to show the sequential number on the steps of stair.
Also, we are all the time required to write the number of stairs, run length and rise length on the drawing. Is this possible in the Revit?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies View Related