AutoCAD Civil 3D :: Creating Points At A Specific Number?
Apr 19, 2012
I am trying to set several hundred points along polyline verticies with the point number starting at 5000. There are no other points in my drawing, yet everytime I start the process, it begins at 1. I have set 5000 at my Next Point Number under Point Identity in the Create Points toolbar. I have also verified that the 'Save Command Settings" is set to yes under the 'Commands-Create Points'. We cannot get this to behave as desired.
This is a 2D polyline with no elevations.
View 9 Replies
ADVERTISEMENT
May 31, 2012
I have made an add-in that automates the insertion of points on a surface and I am trying to find out how to put these points on a specific layer. I guess that changing the "standard" default Point style would do the trick, but I can't find the objects to use in the Civil3D API.
Civil3D 2012
VS 2010, VB or C#
View 4 Replies
View Related
Dec 4, 2012
I have an alignment and would only like to label stations and specific geometry points such as EC/BC. When I add geometry points to my label set it automatically gives me curve midpoints and beg/end of alignment. How can I turn off these labels so that I only get BC/EC?
View 1 Replies
View Related
Sep 23, 2013
I remember in LDD you could insert points in an area, Is that possible in civil 3d. I have a small area of an big project that i want to review all the points. This project has 517000 points in it so it takes to long to insert all of the points.
View 9 Replies
View Related
Feb 21, 2013
I have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
View 1 Replies
View Related
May 4, 2012
C3D 2013. 64 bit. Windows 7.
Question 1.In C3D 2013 is there a ceiling to the number of points allowable in a C3D surface? Is it 1.5 million?
Question 2. In C3D 2013, when creating a surface from Point Cloud data is there a maximum point count based on the answer to question 1 - or is a different point count limit applied?
View 5 Replies
View Related
Mar 15, 2012
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
View 6 Replies
View Related
Mar 19, 2012
I have a point cloud dwg. Is there a way to increase the number of points displayed? The properties of the cloud say there is 14,000,000, but it only displays 34,000. Is there a way to increase the 34,000 number? See Image.
View 2 Replies
View Related
Feb 27, 2012
Is there a way to force the Low Point or High Point in a vertical curve to a specific and precise station?
I can do it with grips, but it's imprecise. In the project I am currently working on, I have some leeway regarding the slopes into and out of the vertical curve, so I have some flexibility, but some of the LPs and HPs need to precise.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 3 Replies
View Related
Mar 4, 2012
I am using Civil 3D 2011 and wondering how to create just one contour on an existing surface at a specific elevation. I need to show where floodwaters would get to at a specific elevation so that contour would be the easiest way if I can contour the surface with just 1 elevation. I don't want to have to create 0.1' contours all over the site and then remove all the extras.
View 8 Replies
View Related
Feb 12, 2013
When I import points from a survey database there is a very large new number being assigned to points that have overlap/numbering conflicts.
I had some survey from one source that was in the 1000 pt # range & additional survey that was in same numbering sequence.
When importing the points I chose "Resolve all" it is renumbering the Point number value to the 5xxxxxxxx range?
Is there some setting where I can change this to a lower # or how/why this is happening?
Next Point Number value @ Settings Tab>Point>Commands>CreatePoints>Point Identity>Next Point Number = 3.
I've attached a couple of captions illustrating the issue.
2012 Civil 3D SP 2.1
Win 7
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 4 Replies
View Related
Apr 18, 2012
I'm having troubles using the create points on grid command. When I run the command, I keep getting asked to type in the point description for each point. I have about 5000 points to create.
Is there a way to set a description for all the points, so I don't have to do this manually?
View 3 Replies
View Related
Jul 30, 2013
I have a grid survey of points and I've entered these points into Civil 3D. Now what I want to do is use these points to create a surface so that I can create a slope analysis of the surveyed area. My problem is that I can't get the points into a point group.
I have a generic grid (15 x 15) of points set up and I've only used a portion of them (defined by the dimensions of the site). So I want to create a surface that includes all of the points that aren't set at an elevation of 0.
View 9 Replies
View Related
Nov 29, 2012
I created a Description Key called "EP" and it will land in a "S-PTS-EP" layer automatically.
I then created a Description Key called "NEW EP* " and created it to land in a new layer called "S-PTS-EP-NEW". But, when I manually create a point called "NEW EP" or "NEW EP BC", it does not land in the "S-PTS-EP-NEW" layer.
Is there some switch I need to turn on or is my description not complying with some naming convention?
View 2 Replies
View Related
Apr 1, 2013
I encountered a problem while creating contours from the points. what actually is the problem with the points or tell the steps once again that would be great. I'm attaching the points file.
View 9 Replies
View Related
Jan 3, 2013
I have a number of 3D polylines that where exported from SDF previously created. They have numerous vertices, each one with a given elevation.
How can I create/highlight the higher and/or lower point in each 3D polyline??
A different solution would be automatically breaking these polylines in slope changing points (i.e. high or low points).
I understand that i can create points according to slope or elevation, but it has to be done manually, each poly at a time, and by tipping numeric values that i am sure that a powerfull software (as Civil 3D is) is able to calculate using the drawing information.
View 3 Replies
View Related
Jan 10, 2014
I am building a surface and started looking at the triangles and found that some are going to non-existant points. I have unfrozen, checked, etc. all of my points to make sure they are not in the drawing.
View 4 Replies
View Related
Oct 18, 2012
Creating points at the stations of an alignment,
I wanted to get the (x,y,z) of the stations of an alignment, but sounds not to work.
In the screenshots below, I got the message “The specified station is not valid for this object” and couldn’t proceed!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Mar 26, 2012
I have a problem about creating feature line. When I want to create feature line between two red points, another point come into being by itself (blue point). If you look at the file I have attached, you will understand well what I want to express. I cant make any changes on this point. I cant delete, modify etc.
View 4 Replies
View Related
Jun 11, 2013
I have been given a survey on AutoCAD which was orginally 2D with the levels written in text next to it. I changed each point (690) to include the level in the Z-direction. I am trying to calculate volumes of topsoil removal and then cut anf fill volumes.
So I opened up Civil3D in metric template and imported my drawing as I have not been given a ddata file with the co-ordinates. Unfortunately I am having trouble creating a surface between the existing points.
View 1 Replies
View Related
Feb 11, 2013
We are in the middle of upgrading from LDD2008 to Civil3D2013. This is a 2 part question. Since there are NO point labels similar to Poiint labels in LDD2008. It is making cleaning the elevations up very teadious. With point labels that are just Mtext. I would rotate 1 label and then match properties to rotate the rest and then jiust more the elevations to make them readable.
How do you all deal with cleaning up the elevations? Is there a way to match proprties as far as the rotatiion of the points? or do you Create blocks from Cogo points?
So, I starting playing with the Creating Blocks from Cogo Points. This creates a block with attributes similar to the way Softdesk treated points back in the day. I ran into a couple of issues. 1 being, it rounds the elevation to 3 decimals places.
When it creates blocks from the Cogo Points some of the blocks are giving me 0.000 elevations for points that had actual elevations.
Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit
View 7 Replies
View Related
Jan 16, 2013
I am having some trouble creating a TIN from a point layer in Civil 3D 2011. Would the best course of action be to extract the points from the drawing and creating a surface from there, or is there a way to create the TIN around the existing points in Model space?
I'm much better versed in AutoCAD, but excited about furthering my understanding with Civil3D.
View 9 Replies
View Related
Apr 12, 2012
I have a Drawing "A" that is the source drawing containing the existing ground surface, topographic linework and features, and points in the Survey Database which are under the Survey tab.
I have a Drawing "B" that is the source drawing containing the Design alignment and profile with references to the data in Drawing "A" such as the surface.
If I create additional points for survey stakeout purposes within Drawing "B", will it automatically be included in the survey database in Drawing "A" along with all the other points or is there some procedure in order for me to continue adding additional points into the database from Drawing "B" or any other drawing that references Drawing "A"?
View 7 Replies
View Related
May 21, 2012
Is there a way to create a surface by manually selecting the points instead of creating a point group? I survey stockpiles for a local construction company and calculate volumes for them.
There may be 50 piles on one site and it would be a lot easier to create a surface by selecting the points manually instead of creating so many point groups.
View 9 Replies
View Related
Jul 31, 2012
is there a quick way to create & export points from a pipe network? i've probably got 100 or so structures that need points with the correct structure name in the point description.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
Apr 12, 2013
Is it possible to create manual points from a cross section.
For example, I want to create a surface from a sketched (hand drafted) proposed cross section by clicking on the different points on my cross section and having a point created in my plan view.
I am working with an ancient engineer who swears by hand drawing data into the cross sections, and then wants me to produce proposed contours based on this data. I am trying to get out of writing down the Station, offset, and elevation, and then manually creating points and having to type in the offset and elevation again.
Stuck on Civil 3d 2011 (until the end of this construction season)
View 5 Replies
View Related
Feb 25, 2013
I am using Civil 3D 2012. I know how to label a line with bearing and distance. What I would like to do is make a table with these bearings and distances referencing the point numbers. For instance, I have a new ROW line that starts at point 1000 and changes direction at point 1001 and changes direction at 1002 and so on. I need a table that shows Points 1000-1001 is ___ Bearing and ___ Distance.
The lines are not parcel lines; they are only line segments.
View 3 Replies
View Related
Mar 15, 2012
I'm working with both Carlson 2012 and Civil 3d 2012 so this could apply to either one.
I have a set of caissons that were shot on separate days, and they started in the middle when they shot them in. I wanted to create a coordinate table, with the points listed from the northernmost point to the southernmost point. I had thought there might be a way to create a table with dynamic input, where I could pick the points as I go along and have the information entered as I pick.
Is there any way to renumber the points via drawing a polyline connecting them, starting with the one I want as #1 and ending with the last one?
View 6 Replies
View Related
Oct 18, 2013
I created a volume surface between the as-built and design surfaces, now I would like to show the points that display the cut/fill depths between these two surfaces. I tried modifying the surface property of that volume surface but doesn't seem to offer what I want.
View 6 Replies
View Related
Jan 7, 2014
I am creating a corridor with custom assemblies on two alignments. the alignments are not parallel and graded independently.
Between the two assemblies I would like to fill from one assembly to the other with a dynamic link. I can't do this as a target to featureline etc as it is within the same corridor. We have created the link with a target but this was done by creating a non-dynamic featureline from the corridor and using that as the target. This is obviously not great as far as keeping the corridor dnamic is concerned.
So I would like to customise a subassembly to allow it to target a marked point on an adjacent assembly.how the SAC tools (Get marked poinit or set marked point etc.) can be used to do this. The help file is less than useful. I am still on 2012 and dont have access to the 2014 SAC yet but will do shortly.
View 4 Replies
View Related
Nov 11, 2011
I currently have a LISP routine that will replace the value of a specific attribute name with sequential numbers in the order that the blocks are selected. Like TCOUNT for attributes - and it only looks for a specific attribute Tag Name called "ID".
However, what I want it to do now, instead of just putting the number into the attribute value, I want the number to be a suffix to the existing default tag value of the tag named "ID" which is "ADDRESS:" for some blocks and "ELEVATION:" for other blocks but the tag name that the routine always has to filter for is "ID". That way the user can pick anywhere on the block - not being forced to pick the tag we want to add numbers to.
What I need the new LISP to do is append a space and then a number to the existing tag value in the block, so that the result would look like "ADDRESS: 1", "ADDRESS: 2", "ADDRESS 3" or "ELEVATION: 1", ELEVATION: 2", etc. depending on whatever the default value for the tag "ID" is.
there are several hundred different block names - but they all have a Tag Name of "ID" - whose default value is sometimes "ADDRESS:" and sometimes "ELEVATION:".
View 8 Replies
View Related
