AutoCAD Civil 3D :: Error Adding Large DEM
Mar 12, 2013
I have been trying to add a county wide 3m dem into C3D 2012 with no success. My goal is to be able to open a drawing, zoom into a small section of the county and instantly have an accurate surface to look at. I realize this is an extremely large file with over 450 million points but I was hoping that if I set the surface to "no display" then created a boundary around the work area before turning the surface on it might work. However, I can't even get the dem to load without crashing the computer. I've also tried adding a data clip boundary to the surface then adding the dem. This worked but was extremely slow loading defeating the purpose. Is there another method used for adding a dem as large as this to a surface?
View 6 Replies
ADVERTISEMENT
Nov 17, 2011
I am trying to attach a Source Data Connection to a DEM that is 100km x 77km. I keep getting the error message "There was a problem adding data to Map." I have set the projection. I have also tried a changing the source DEM sizes - 100m grid and 1000m grid.
Also tried GeoTiff and ESRI asc formats. Still same error message.
Using Map 3D 2012 64 bit on Windows 7
View 9 Replies
View Related
Aug 19, 2012
I have some very large comma delimited ENZ files that I wish to create point clouds from. When I try to read points into a points cloud from this file I get "an error occurred in data processing" after a few seconds.
Since the error occurs early on, I was assuming C3D is getting hung up because of the first row of the file which contains an "x,y,z" header. The text files (around 270MB) are too large to open in wordpad, excel or similar, so I'm not aware of any way to edit or delete this line. To counter this I tried creating a new point file format using "x" as the comment tag (and setting all the other parameters as required. This "parsed" properly when testing on the file, however when I tried to import either as points or into a point cloud I still get the same error as above.
Is the file size/number of points too large for C3D or is it some other problem?
View 9 Replies
View Related
Jun 12, 2013
When attempting to attach WMS data, Map Task Pane>Display Manager Tab>Data>Data Connect dialog>Data Connections by provider.
After entering the server name or URL and choosing "connect" I get the following errors:
"Failed to open FDO connection"
"The HTTP request URI was not found by the server"
It seems to work just fine for other users using the same steps.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Jul 11, 2012
I am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.
I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up.
Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??
Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 2 Replies
View Related
May 29, 2006
to add large test to large resolution files, i.e. 4000 pixel files from Canon 5d for example?
When I have small files, 500 or 1000 pixels for web, no problem, but if I try on a bigger, it seems even the largest fonts, look miniscule.
View 8 Replies
View Related
Apr 8, 2014
I am having a problem placing large .tif files that have both LZW compression and IBM PC byte order.
View 7 Replies
View Related
Feb 29, 2012
An associate is trying to open a 60,000 x 60,000 tiff file using PS CS5.1-Extended on a windows 7 platform with 6G RAM.
He gets the error message "Photoshop can only decode JPEG encoded images up to 32767 pixels wide of tall."
I suggested that he might have a jpeg whose extension got changed to tiff. He says no, it's a tiff, and besides how would one generate a jpeg that size.
View 8 Replies
View Related
Jul 28, 2012
In working with slightly more complex curve shapes in CorelDraw X5, I'm discovering when using the contour option it results in an error ("Contour Offset too large"). This was not experienced in CorelDraw 9 at all. I'm experiencing this error with inside or outside contours, steps at 1, offset at 0.1. Reducing nodes eventually will allow the contour to be successful. However, it takes an extreme reduction of nodes which distorts the shape a lot.
View 15 Replies
View Related
Oct 23, 2013
Some of the thumbnails on elements 12 organizer have an error message of "File Size too Large" and are not displaying. All of the photos are jpeg file and are aound 8mb.
View 4 Replies
View Related
May 16, 2012
See drawing attached.
I have a large fill area directly dropping to to a large cut area. All of the above work is in rock, There is a retaining wall along a section of the "cliff face" but not at the ends where the cut and fill meet.
I would like to transition the fill batter on to the cut batter to enable the filled area above to be self supporting.
View 1 Replies
View Related
Oct 25, 2012
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
View 4 Replies
View Related
Mar 17, 2013
My problem is that when i add a map through WMS connection and later turn my drawing with the map into a .pdf file, the outcome is a very large file (my certain A4 drawing was 30,4 Mb). I guess AutoCAD stores a lot more info than i need the drawing.
Managing with a 30Mb file is very difficult when i need to, for example, sent it through an e-mail.
View 4 Replies
View Related
Oct 28, 2011
What do you use to Print your large Sheetsets ? Do you use the Publish function within AutoCad ?
Do you use Acroplot or any other 3rd party software ?
I had to print around 80-100 Plan and Profiles Sheets, Sections, Coverpage, Index, Legend, etc.
View 9 Replies
View Related
Nov 25, 2013
Is there anyway to prevent a corridor from jumping across large distances as in the attached screen shot? There are no targets in any of these regions.
View 1 Replies
View Related
Dec 13, 2011
I have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)
View 3 Replies
View Related
Dec 9, 2013
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
View 9 Replies
View Related
May 3, 2012
I am in Civil3D 2012, and am trying to render a retaining wall we doing. I set up a corridor, surface, and profile, and have it working with plans and such, but when I try my hand at rendering it looks rather odd. The surface is fine, and I can choose materials on the vertical wall subassembly, but It just shows a paper thin object ever 25' and a large surface on top. Does the top of the wall need a feature line as well.
View 1 Replies
View Related
May 3, 2013
I am trying to create a localized existing surface from a very large topo. I promoted the existing surface shortcut into my drawing, then created a cropped surface to be put in a new drawing. After creating the cropped surface the new file shows that a surface has been created, however, the surface contains no data. I am using c3d 2012.
View 1 Replies
View Related
May 8, 2013
how to get 2013 C3D to create a large watershed with a big elevation drop? Arcview can do it, but I bought the new version of AutoCad, which meant a new computer, instead of the Arcview extension and I don't see it happening.
View 9 Replies
View Related
May 16, 2013
Fatal Errors when editing large amounts of MText? I usually have to insert a good amount of drawing notes that we keep in word documents on our network and i find that the process of editing them causes me to Fatal Error when trying even the simplest edit, like erasing a sentence or changing a name.
How to edit the document in word before copy/pasting it into CAD, but the documents are locked for editing as is our standard practice for the general notes that we use.
I am going to make a dummy drawing in hopes of making my changes in an empty drawing, (although I strongly feel this is not a file size issue but a word to CAD translation issue).
View 8 Replies
View Related
May 15, 2012
I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?
View 4 Replies
View Related
Sep 28, 2012
I downloaded CS6 and everytime i try to add a shape I get a program error message
View 4 Replies
View Related
Dec 4, 2012
if it is possible to add a new custom tab to the Toolspace within Civil 3D.
View 2 Replies
View Related
Feb 11, 2013
I am trying to add CGList to the shortcut menu through CUI, however I cannot preselect an object. It wants me to select an object after I right click and pick the command. Pickfirst is already set to 1.
View 3 Replies
View Related
Dec 14, 2011
New to Revit. Using 2012. I'm trying to add a double hung window to a wall and get the following error message:
Can't make type "Double Hung with Trim : 36" x 48"
- Error 1
-- Windows : Double Hung with Trim : 36" x 48" - Mark 22 : id 172423
-- Type : Windows : Double Hung with Trim : 36" x 48" : id 172439
I get the same error message no matter what size I try to use
View 2 Replies
View Related
May 4, 2012
All I want is to manually add a station in between to other stations.... ie I can produce this-->
However I would prefer to produce this -->
Which has an additional station added as required from time to time.
View 3 Replies
View Related
Sep 18, 2013
Why is my corridor adding a hinge? [Atleast I think that is the problem]
I am trying to create a berm that is 8' wide. For my assembly I used 4' wide basiclanes and daylightgeneral (with 3:1 slope in all parameters) on left and right side.
In the top image I have circled two of the areas in which the hinge line is shown. And in the bottom right the cross section of one side of the berm is shown. As you can see on the inside (left) there is two feet sloped at approximately -1% before it daylights to the surface at 3:1
Why isn't the left side matching the right?
View 4 Replies
View Related
Jan 21, 2013
I have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
View 9 Replies
View Related
Aug 30, 2013
I have got a csv file and want to add to the surface but it says error in adding point file.....don't know what to do. Size of the csv is 13MB and contains about 0.2million points.
View 2 Replies
View Related
Apr 6, 2011
I was wondering if it is at all possible to add a polyline to an existing alignment? The purpose of doing so would be to extend the alignment so that I can display the proposed kerb and gutter.
View 9 Replies
View Related
