I am trying to add CGList to the shortcut menu through CUI, however I cannot preselect an object. It wants me to select an object after I right click and pick the command. Pickfirst is already set to 1.
View 3 Repliesif it is possible to add a new custom tab to the Toolspace within Civil 3D.
View 2 Replies View RelatedAll I want is to manually add a station in between to other stations.... ie I can produce this-->
However I would prefer to produce this -->
Which has an additional station added as required from time to time.
Why is my corridor adding a hinge? [Atleast I think that is the problem]
I am trying to create a berm that is 8' wide. For my assembly I used 4' wide basiclanes and daylightgeneral (with 3:1 slope in all parameters) on left and right side.
In the top image I have circled two of the areas in which the hinge line is shown. And in the bottom right the cross section of one side of the berm is shown. As you can see on the inside (left) there is two feet sloped at approximately -1% before it daylights to the surface at 3:1
Why isn't the left side matching the right?
I have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
I have got a csv file and want to add to the surface but it says error in adding point file.....don't know what to do. Size of the csv is 13MB and contains about 0.2million points.
View 2 Replies View RelatedI was wondering if it is at all possible to add a polyline to an existing alignment? The purpose of doing so would be to extend the alignment so that I can display the proposed kerb and gutter.
View 9 Replies View RelatedI have been trying to add a county wide 3m dem into C3D 2012 with no success. My goal is to be able to open a drawing, zoom into a small section of the county and instantly have an accurate surface to look at. I realize this is an extremely large file with over 450 million points but I was hoping that if I set the surface to "no display" then created a boundary around the work area before turning the surface on it might work. However, I can't even get the dem to load without crashing the computer. I've also tried adding a data clip boundary to the surface then adding the dem. This worked but was extremely slow loading defeating the purpose. Is there another method used for adding a dem as large as this to a surface?
View 6 Replies View RelatedIn this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.
How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?
I'm trying to figure out the best way to split an alignment so that I do not disturb the stationing of the alignment beyond a station equation. I have a very long alignment with a finaized design. I have a design change to make, which means I need to move a section of the alignment, and I want to do it without changing the stationing past a defined point so that it does not affect the design (corridor) past that point.
View 7 Replies View RelatedI have created a surface with a point group. I have a few points on the edge of my surface that need to be added to the surface. I can add them to the point group, but when I updated my surface nothing happens. The triangles don't extend to my newly added points and my profile of the area doesn't show a surface where these new points should be. the new points I want to add have the same properties as the other points in the point group, they are cogo points.
View 4 Replies View RelatedI have recently run across an odd issue when adding text to a drawing in Civil 3D. The problem comes with creating a new text item in an existing drawing. In this drawing, if I insert a text object, Civil freezes up for several minutes. Once it is un-frozen, the text pops up as it should and everything works as normal. This happens for both single line and multi line text, with any of my text styles, and across all layers that I have tried. Other regular drawing objects do not cause any problems, and there are also no problems editing any existing text objects.
To troubleshoot, I have created new drawings and added text, but they do not have problems. I have also opened other existing drawings, but no problems with those either. I am worried that the drawing file may be corrupted, but audits and recovers don't show ay errors, and I have purged out everything not in use.
The strangest part is that if I open the same drawing in Map 3D, I have the same text insertion problems, but when I open it in plain CAD or in Raster Design, the text will insert with no problems.
I need to do a cut/fill analysis not residential site and this site has like 6 retaining walls there is a 6 foot difference in grade.
My surface is not recognizing the grade change when I make the polyline into a wall breakline.
I'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...
View 5 Replies View RelatedI have an existing alignment issued to me which has been created using all straight lines even where there should be curves. I am trying to insert curves in these areas. Using free curves (2 entities and a through point) I create a curve then somethings happen I can't work out -
1. The curve is created but the original straight linework stays. I would have thought the original linework would automatically delete. See attached pdf between points 60 and 62 the curve and straights can be seen.
2. Then all stations after the curve are changed to the question mark symbol. If i click on the alignment all the grips are still there for the full length of the alignment, indicating the alignment is still in one piece.
3. If I try to create another curve further along the alignment it won't allow it. Stating on the command line "Selected entity must be part of the main entity."
I'm using C3D 2009.
Adding a prefix to the end of a cogo point ie.(when we bring in info we have a top of curb and a face of curb shot and we add TC and FC to the text componite editor.) is there a process where i can add this at one time or set civli up to where when it processes the file to recognize them and add this automatically for minimize drafting time?
View 4 Replies View RelatedI am using AC3D 2014. I have created a surface from downloaded DEM points, but, as expected, the contours are not as accurate as I would like. They vary from known elevations anywhere from a few inches to several feet.
I also have survey data from approximately 500 points which include Northings, Eastings and Elevations. Is there a way to add these points to my existing contour surface and incorporate these know NEZ points such that he contour surface is more accurate?
I have already converted my "known point" file to a .txt format with comma delimited information.
Any way to add a (R) to the Bearing dislpay, to indicate a radial bearing, in a Line Table?? This would only apply to certain lines, not all of them. I can specify which line. That function does not need to be automatic.
View 9 Replies View RelatedI have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View Relatedhow to fix this triangulations. Adding extra breaklines does not seem to fix the issue.
View 9 Replies View RelatedI have some very large comma delimited ENZ files that I wish to create point clouds from. When I try to read points into a points cloud from this file I get "an error occurred in data processing" after a few seconds.
Since the error occurs early on, I was assuming C3D is getting hung up because of the first row of the file which contains an "x,y,z" header. The text files (around 270MB) are too large to open in wordpad, excel or similar, so I'm not aware of any way to edit or delete this line. To counter this I tried creating a new point file format using "x" as the comment tag (and setting all the other parameters as required. This "parsed" properly when testing on the file, however when I tried to import either as points or into a point cloud I still get the same error as above.
Is the file size/number of points too large for C3D or is it some other problem?
In the command GRADING>EDIT FEATURE LINE GRADING>INSERT ELEVATION POINT
I can specify the Increment value which is what I want but this only allows me to select one line. How can I select multiple lines and specify an increment value?
I draw property plats for a surveyor and looking for a way to add the bearings (for example: N 56 15' 32" E) along the property lines. Right now, I use the Distance command to find out the bearing, write it down, and then add it to the aligned linear dimension text. I'm guessing there's a faster way to get a bearing along with the distance without typing it in.
View 2 Replies View RelatedIs it possible to add a custom object such as soil reinforcement to C3D? I have a roadway grading plan with cut/fill slopes that will require geosynthetic reinforcement. Is it possible to add reinforcement to the drawing and have C3D calculate quantities?
View 2 Replies View RelatedI am trying to add contour lines to a surface at very specific elevations (rain event elevations). I can add all the intervals I want but can't seem to figure out how to add a contour at a certain elevation.
View 2 Replies View RelatedTo my frustration the VIEWBASE command and other AutoCAD 2013 cool new tools for creating views aren't included in Civil 3D 2013. When you enter command you get error "AcModelDoc.arx is missing"
So I've installed AutoCAD 2013 trial and took
- "ModelDoc.cuix" & "ModelDoc.mnr" from "C:UsersXXXAppDataRoamingAutodeskAutoCAD 2013 - EnglishenuSupport"
- AcModelDoc.arx from "C:Program FilesAutodeskAutoCAD 2013 - English"
Then I put the files to similar directories of my Civil 3D 2013 installation. The Layout menu got updated itself and now I can see all new buttons and commands on the Ribbon. However none of new commands work! No error appeares in command line but message "command not found".
Is there any way I can get it working? Or I should ask Autodesk to gift me a free copy of AutoCAD 2013 now?
P.S. I know they've even poinet that out in readme file [URL]. But who reads it before it's too late?..
how would i add a static offset to the both the northing and easting to all my points? i need to add 3.02 feet to the northing and 0.56 feet to the easting. elevation is good, but the positions all need to be shifted.
View 7 Replies View Relatedwhen running spell check the tab for adding a word to the dictionary is not available.
View 9 Replies View RelatedI have an existing ground surface with all different z co-ords and im trying to add three proposed buildings to my exisiting ground with all the builidngs having a level of 32.5 as a minimum, however at some points the ground is higher than 32.5 and I only want to raise my existing ground to 32.5 within the proposed buidling layout if it is below 32.5 as im doing a flood calculation. What do i need to for this?
View 2 Replies View RelatedI want to show the information on the attached document in the drawing also attached in civl 3d. The final outcome layout of band data i want is titled wanted outcome and the drawing is preliminary vertical long section.
View 9 Replies View Relatedslow corridor rebuilding after adding superelevation?why?was ok previous years.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710