AutoCAD Civil 3D :: CUI File Location And Migration
Apr 27, 2012
I have just upgraded from C3D 2011 to C3D 2013. I know it should be simple to copy my custom CUI file from one release to another, but somehow I'm missing it. In 2013, I open Workspace/Customize, then swith to the Transfer tab (right sofar?). In the pull down, I choose Open. Now at this point, I think I should just browse for my 2011 CUI file, but for some reason, I can't find it. If I search my C drive, I still can't find it. With 2011 open, in Workspace, the name of the CUI that I use is "Randy", so I'm assuming the file name to search for would be randy.cui.
View 5 Replies
ADVERTISEMENT
Apr 2, 2012
I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies
View Related
Aug 23, 2013
we are planning to migrate from windows xp to windows 7 64 bit. Is there are chance to deploy a migration script to backup the user settings from xp and import them to windows 7. Copying the files from %appdata% is not a good solution because if the program was never started before the Autocad product will start a repair for user settings and so the files and settings are deleted.
I need a method for more than 100 pcs so using the implemented export and import tool is not possible.
View 6 Replies
View Related
Aug 8, 2012
We recently upgraded from 2012 to 2013.I set up a task in Task Scheduler to migrate one of our working folders to migrate to the new version.When I open a part or any other file from that migrated folder and save it I get the attached message.
The message states the file has been migrated. Why do I need this messge? Or has the file been migrated?
View 1 Replies
View Related
Jan 30, 2012
I know I can go into the AeccSetNetworkCatalog command and set the file path but I want to do it pragmatically. Is there any way to do this? If so I don't know where it is located?
View 2 Replies
View Related
Jul 7, 2013
I have a Civil3D file with Drawing Settings = WGS84 UTM-Zone44 North Map3D coordinate system = WGS84 UTM-Zone44 North a USGS DEM from HYDROsheds data set (tile = N40E80) also note this DEM is a folder of multiple ADF files when using FDO provider the DEM comes in just fine but it lands in the wrong location thousands of kilometers away.
When I load the same shape files into ArcMAP10 with spatial reference as WGS84 UTM-Zone44 North everything lines up perfectly.
The header prj.adf file is this:
PROJECTION GEOGRAPHIC
UNITS DD
DATUM WGS84
PARAMETERS
so how do I make it come into Map3D correctly?
View 3 Replies
View Related
Jul 27, 2012
I would like to express my dismay at hearing that exchange content is being migrated to "social networks". While I have no problem with this, per se, this will restrict access for the majority of users who cannot access Twitter, Facebook and Youtube at work which is when they are likely to need the content most.
As a matter of interest how many of you have access to these networks at work (from your laptop/PC not via smartphones, tablet devices etc).
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 6 Replies
View Related
Jun 13, 2013
I migrated from AC3D 2010 32-byte to AC3D 2012 64-byte recently. When I migrate my projects to 2012 and open the old 2010 drawings in 2012 I lose the surface lines out of my section sets. It doesn't seem to bother the profile views, only the section views.
Is there a way to work around this problem w/o having to regenerate the section views?
View 3 Replies
View Related
May 9, 2012
We have always made extensive use of File Linking our Autocad (2009) models into 3dsmax. I seem to have found a stability issue when migrating from a Max2012 scene that includes a file linked Autocad file to Max2013.
When you Reload the linked file with 'Show Reload Options' ticked, and then click on the Advanced tab and then on 'Select Layers to include...', Max will crash. It seems to do this every time.
This only seems to happen with Max scenes that have begun in Max2012.
Workstation spec: i7 2700k, 16GB RAM, GTX480, W7x64
View 9 Replies
View Related
Jul 6, 2013
Photoshop Elements 6 (20070910.r.377499)
I do not know why the catalog has changed the file location of "ALL" pictures to the location on my backup drive.
Example: K:My DocumentsMy PicturesPetsPICT1460-1.JPG
The actual location of the original photo is: D:My DocumentsMy PicturesPetsPICT1460-1.JPG
The location of "My Pictures" is on my primary Hard Drive D:My DocumentsMy Pictures
Why is Photoshop changing all of my 37,000+ photo thumbnails to point to my Backup Drive K:?
I need to correct the catalog file. How do I make the correction and stop it from happening in the future?
View 2 Replies
View Related
Jul 1, 2013
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
View 5 Replies
View Related
Aug 7, 2013
I want to plot 100+ drawings to PDF's and was wondering if there is a way to change the base file location it saves, to a location I can choose? I am currently using the PDF to DWG.pc3 file in a plotting script. Is there also a way to get rid of the PDF viewer when the script is running?
View 4 Replies
View Related
Dec 5, 2013
In Civil 2013 is there a way to lock where you drag the tool bars? I work on dual screen and drag my properties and layers manager over to the second screen. Randomly they will jump back from the right screen to the left screen on program restart.
Also when I open the grading toolbar and drag it over to the right screen some commands, such as breaking a feature line, will cause it to jump back into the middle of the left screen right then.
Is there anyway to lock the toolbars to where they were dragged last?
View 2 Replies
View Related
Mar 19, 2012
I've set the start and end locations to be at the structure inner wall and applied rules but the invert elevation is still as if the pipe ended at the center of the structure. Did I miss something or does this not do what I think it does?
View 1 Replies
View Related
Apr 30, 2013
To Set Geographic Location from a Map, the Autodesk users manual says to "Click Insert tabLocation panelSet LocationFrom Map"
There is no location panel on any insert tab that came with Civil 3D 2014.
What am I missing?
View 5 Replies
View Related
Oct 2, 2012
Is there a way to lock the X,Y location of points so that they don't get moved but still be able to change the point style fo the locked points?
View 6 Replies
View Related
Jul 24, 2013
I had created a corridor using the attached assembly with conditional cut/fill and SlopeToSurface SA, the cut condition provides a ditch SA at cut only. Then had the Ditch Bottom Profile to follow a ditch profile that I created, and flows toward the increasing chainage. The horizontal offset and elevation of the ditch runs perfectly fine as desired, except between Sta. 0+465 (cut section) and Sta. 0+470 (fill section), where the ditch ties back to the edge of shoulder instead of going toward the outside (as shown in the blue lines).
My question is, do I need to make a transition between the cut and fill sections? If so how much effect and details is needed as I have a few other locations with the same issue.
View 2 Replies
View Related
Mar 6, 2012
I have created a label in Settings>Intersection>Label Styles>Intersection Location Labels. The label will annotate the intersection stations and alignment name - however I haven't been able to configure the northing, easting and point number of the intersection.
View 2 Replies
View Related
May 29, 2011
I am testing the new 2012 ACA. Where do I find the Plot files this time. Seems like it changes with each new operating system or ACA release.
Intel Core i7 2600k
1155 Socket High-End Motherboard
Dual ATI Radeon 5870s
6x OCZ SSDs (RAID 1)
16GB CORSAIR Vengeance SDRAM DDR3
Corsair TX850 PSU
6x 27" ACER LED Monitors
View 4 Replies
View Related
Oct 10, 2012
I have a standard install of Inventor 2012 SP2, but for some reason it cant seem to find the images for IBL effects. See attached Screen shot, when I go to select an item there is nothing there.
I have found the files in the "c:userspublicautodeskenviroments" folder but why Inventor cant see them?I have looked in "App options" in the "file" tab and in the project file and I cant see any pathing options that relate to the enviroments?
The default images for textures and bumpmaps are all found OK just not the IBL files? How I can set the path to these enviroment images?
View 5 Replies
View Related
May 26, 2011
I would like to change the: Options --> Tool Palettes File Location to point to a different location.
I know how to do that in vba but i am totaly lost in vb.net.
View 2 Replies
View Related
Feb 10, 2012
I'm working on creating iparts for fasteners. Initially I had the O.D. of all the fasteners as nominal, which created an issue when using analyze interference. All hole features are based on the minor diameter, so they are displayed correctly on the .idw. Nominal fasteners with minor diameter holes means interference.
I am currently referencing the thread.xls spreadsheet, located in the Inventor Design Data folder, within my fastener ipart spreadsheet. This allows me to maintain a constant connection to the thread.xls file if there are ever changes from Autodesk.
My issue comes about when I am placing the ipart files within assemblies. I am asked for the location of thread.xls. Once I re-establish the link, Inventor tells me it's not part of the active project. BUT, if you look at the Project - Folder Options - Design Data, it is the same location. So the project does have a link to the folder structure.
Would I have to create a library in each project so the link can be established.
View 1 Replies
View Related
May 30, 2013
Using 2011 on W7 64 bit machine. When I try to set the location for the "Autosave File Location" or the "Temp Dwg File Location", I get the attached error message. I've done everything I know to fix it to no avail. I am on my personal laptop, I am an admin will full control rights of course, I've made sure the folders are not read only...
View 7 Replies
View Related
Nov 5, 2012
How to set certain Civil 3D data folders to a network location. For example how can I set my default QTO categories, pay item and formula file paths to a network location?
I've figured out how to set Survey Database and Pipe Network Parts Catalog paths. It seems there should be some general configuration settings dialogue for all these paths somewhere. Is there? If not, is there a list of commands for configuring all the path settings?
This is for standalone clients not using Vault.
View 2 Replies
View Related
Apr 23, 2013
I can't get the "Properties" dialog box to remain the same location each time I launch Civil 3D 2014. I have "xref" and "toolspace" on another monitor, along with "properties" although each time I launch CIvil the "Properties" dialog box reverts back to the middle of my other monitor...
View 1 Replies
View Related
Oct 11, 2012
I need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
View 6 Replies
View Related
Mar 21, 2013
I have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Apr 23, 2012
When opening a new drawing in 2013 the UCS icon isn't in the bottom left corner - how to correct ?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
May 30, 2012
I have a custom coordinate system defined and would like to send it out to a client, since they're having trouble creating a new coordinate system based on my parameters. Is it possible to sent that as a file so they can copy it to the appropriate folder or is it embedded in a database somewhere?
View 1 Replies
View Related
May 4, 2011
I got 2011 version about 20 minutes ago - any tips for a hard core 2005 version user? Other that I have to install VBA as it's no longer part of tha package. Settings probably migrated OK.
View 4 Replies
View Related
Jun 29, 2012
I have only been using Inventor since late winter . I have create a "master" folder with an assembly, drawing, and excel cutlist. This folder also contains sub folders with the sub-assemblies and parts.
In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off). It works fine as is.
Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it. The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder. How do I write a rule to "save as" all these sub-assemblies and parts to the new location?
View 4 Replies
View Related
