I am testing the new 2012 ACA. Where do I find the Plot files this time. Seems like it changes with each new operating system or ACA release.
Intel Core i7 2600k
1155 Socket High-End Motherboard
Dual ATI Radeon 5870s
6x OCZ SSDs (RAID 1)
16GB CORSAIR Vengeance SDRAM DDR3
Corsair TX850 PSU
6x 27" ACER LED Monitors
I am trying to locate Plot Style file. In Option: File: Printer Support File Path I get following directory:
C:Program DataAutodeskACAD 2011 enu PlotterPlot Style.
My problem is: I can not find "Program Data" any where, in "Program files" and by any search I can not see "enu".
how to add the plot stamp time/date and file location when printing in autodesk inventor the same as in Autodesk.
View 2 Replies View RelatedIs there an option to eliminate AutoCAD from automatically inserting the layout tab name into the file name when creating a PDF? Once upon a time it would only use the file name (i.e. A-101). Now it uses "A-101_Layout1" (or whatever the layout name is) by default. I either have to live with it or manually change each file name during the process of creating the PDF or after it's been created.
View 1 Replies View RelatedI am new to autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?
View 1 Replies View RelatedI am trying to plot to PDF and it wont do it.
View 1 Replies View RelatedPhotoshop Elements 6 (20070910.r.377499)
I do not know why the catalog has changed the file location of "ALL" pictures to the location on my backup drive.
Example: K:My DocumentsMy PicturesPetsPICT1460-1.JPG
The actual location of the original photo is: D:My DocumentsMy PicturesPetsPICT1460-1.JPG
The location of "My Pictures" is on my primary Hard Drive D:My DocumentsMy Pictures
Why is Photoshop changing all of my 37,000+ photo thumbnails to point to my Backup Drive K:?
I need to correct the catalog file. How do I make the correction and stop it from happening in the future?
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View RelatedI am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
AutoCAD Architecture 2014 (Student License) The SET LOCATION panel is missing on the INSERT tab.
View 1 Replies View RelatedI am working in Arch Desktop 2011 and need to make a wall for a upper floor and roof line with different plate heights. See the attached drawing for explanation.
What I'm trying to do is create an upside down "V" wall to fill in this area. This is an as-built drawing for an existing house with an addition.
how to find out using the .NET API if a plot device requires a file name when ploting?
E.g. choosing the plot to PDF device would require a file name.
How to turn plot and publish log file off? (see attached pic)
I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.
[URL]....
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
Using someone elses template. When I plot to PDF the layout sheet name is not the PDF plot file name, it uses the drawing file name (and hence the same file name for all plots, not what I want). When I plot in paper space, my layout sheet name is the output file name, is there a way to change this?
View 6 Replies View RelatedI am working on extracting information from DWG with extended Property Set Definitions. I have added Location Property on my Door objects, and would like to retrieve it in my application.
Definition as shown in AutoCAD > Manage > Style Manager > Property Set Definitions
DoorObjects Property Set
Name: AtSpaceID
Description: Space - SpaceObjects - SpaceID
Type: Location (becomes Automatic inside .NET API code)
Source: Space - SpaceObjects - SpaceID
Space Objects Property Set
Name: SpaceID
Description: SpaceID
Type: Integer
I have tried the .NET API. see Code below. I am stuck at Property Definition Location. Not too sure where I can retrieve the value for my At Space ID at my Door Objects.
I tried the following code below and it throws error such as eInvalid Input or eNot Applicable.
Part of my code
Door doorEntity = trans.GetObject(doorObjID, OpenMode.ForRead) as Door;ObjectIdCollection idsPropSet = PropertyDataServices.GetPropertySets(doorEntity);foreach (ObjectId idPropSet in idsPropSet){ PropertySet propSet = trans.GetObject(idPropSet, OpenMode.ForRead) as PropertySet; PropertySetDefinition propSetDef =
[Code]........
Every time that I go and set the sheet template, it says that it can't find it, then when I check the location, the path change to something funny: E:/C/Doc........
View 9 Replies View RelatedIs there a way to preset the reach of the sprout on Location Property Definitions in Property Sets?
For example, I have upper cabinets that aren't over a Space, because there isn't flooring underneath them. Because of this, the sprout reports "Space Not Found" in the cabinet schedule, and I have to go in and manually pull each sprout out until it latches onto a Space.
I would like to set all sprouts to automatically reach out 2'6" from their insertions point.
I'm having trouble plotting to PDF
We normally plot to PDF using the free Cute PDF converter which is quite good although we get out of memory issues from time to time which is not so good.
We have therefore decided to use the one provided by Autodesk (DWG-PDF.PC3). The main drawings appear fine however the text we use within our title bars is awful and bloated for some reason. I've read the help file and cannot see anything relating to this issue. On the attached image the left hand side shows a PDF created with the Adesk DWG-PDF.PC3 and the one on the right is with the Cute PDF, although a different size there is a clear difference in resolution.
I created a 3D view, shaded Realistic and inserted it into a sheet that is 11x17. When I plot (whether to .PDF or our copy machine) after the plot dialog box disappears, another one pops up that says "Plot Progress: Attempting to Cancel Sheet". Then it prints everything in Paper Space, but the viewport doesn't plot. By the way, when I look at it in Plot Preview, it's perfect. Fortunately I don't need to give this to my client for another 10 minutes.
View 1 Replies View RelatedWe have a computer that has Arch 2011, 32 bit on windows 7 on it. About 6 months ago, when you go to plot, the plot dialog box takes up to 5-10 minutes to open. then if you change ploters or setups, it takes another 2 minutes. It just spins. when you are ready to plot, the plotter or copier starts as normal speed.
then another computer Arch 2011, 64 bit on window 7 start doing it about a week ago. the only thing was that windows updated the HP plotter driver and windows. It will do the same thing as above. Our copier is not an HP and the driver was not updated, but it takes forever to open the plot dialog box.
Either computer can publish. However, in all other programs, the files printer box open and print normally.
Is there a setting that was changed in autocad?
I can't plot PDF on AA 2011.
View 3 Replies View Relatedwhen working with a 3d model i want to switch between front, top, side views to change my XYZ axis. when i hit the view icon(whichever i am going to) it regenerates and zooms extents. is there w way to stay zoomed into the current location but toggle the crosshair XYZ plane?
View 1 Replies View RelatedI know the possibility of a plot style just disappearing is slim to none, but I have this user that constantly claims her plot styles have "disappeared".
When I check them, the entire "Plot Style" folder is gone. One day it's there the next it's gone.
She also has this problem with the DWG to PDF print option. It was there, now it's gone. She claims she isn't deleting anything. I will get them back on her PC and a few months later they will be gone.
She is a contract worker who also spends time at her office off site. I am not sure what version of AutoCAD she is using. I manage an AutoCAD group of about 20 users and none have this problem.
I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies View RelatedEvery time I try to plot something with a PDF embedded it takes a very long time to spool and plot. Additionally, a PDF in the drawing slows it down so significantly it's almost not worth using..This happens whether the PDF is less than 1 MB or 50 MB...no difference. Has this been fixed in 2012? Why to PDF's do such a drain on system resources when they're such small files to begin with?
View 5 Replies View RelatedI am currently trying to figure out how to use ACA 2012.
A client wants me to add flooring zones to a few sets but I cannot get them to print in color. I assume I do this from my pen assignment but I cannot figure out what colors they are to change them.
I do my zones by using Home>"under build" space>from the properties I click Zone 0-15>polygon and then I trace the rooms. Then it fills the room with a preassigned color. How Can i figure out what colors they are using so I can edit my pen setting or is there an easier way to print zones in color and the rest in B&W?
I'm running Autocad Architecture 2013. My .dwg has about 15 pdf's in it (from a consultant that does hand drawings that I scan in, and use the image manager to insert into my drawing). The PDF's range from under 1mb, to 10mb. The PDFs are in model space and within my various drawing sheets, I show them in my drawing sheets via multiple viewports. I noticed that when I go to plot a sheet that has pdfs shown in viewports, and click on PLOT PREVIEW, the PDF's don't show up - everything else shows up, linework, jpegs, etc, but not the PDF's! I fiddled with the viewports and noticed that if some part of the PDF's image frame was visible in the Viewport, the PDF would appear in Print Preview. But if the viewport sat directly over the PDF's image frame, the PDF would not show up in the Plot Preview!!!
Could it be I've exceeded the maximum number of Viewports in my entire .dwg? (I have about 16 sheets), Or, could it be some mysterious autocad system variable that I'm running up against.
the ctb files do not appear in the drop down list in the plot dialog box. I have checked the files and are located in the correct directory. Also have verified that the files are being pointed to in the options dialog box.
View 2 Replies View RelatedOLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies View RelatedI have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View Related
