Every time I try to plot something with a PDF embedded it takes a very long time to spool and plot. Additionally, a PDF in the drawing slows it down so significantly it's almost not worth using..This happens whether the PDF is less than 1 MB or 50 MB...no difference. Has this been fixed in 2012? Why to PDF's do such a drain on system resources when they're such small files to begin with?
View 5 RepliesI'm running Autocad Architecture 2013. My .dwg has about 15 pdf's in it (from a consultant that does hand drawings that I scan in, and use the image manager to insert into my drawing). The PDF's range from under 1mb, to 10mb. The PDFs are in model space and within my various drawing sheets, I show them in my drawing sheets via multiple viewports. I noticed that when I go to plot a sheet that has pdfs shown in viewports, and click on PLOT PREVIEW, the PDF's don't show up - everything else shows up, linework, jpegs, etc, but not the PDF's! I fiddled with the viewports and noticed that if some part of the PDF's image frame was visible in the Viewport, the PDF would appear in Print Preview. But if the viewport sat directly over the PDF's image frame, the PDF would not show up in the Plot Preview!!!
Could it be I've exceeded the maximum number of Viewports in my entire .dwg? (I have about 16 sheets), Or, could it be some mysterious autocad system variable that I'm running up against.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I recently made the switch at work from AutoCAD 2000 to 2012. Right now I’m working with a small drawing and the copy paste option is taking forever, I wasn’t sure if it was the drawing so I went to a previous large file and that takes even longer.
View 8 Replies View RelatedI have a fairly simple 3D model in ACAD ARCH 2011. I am rendering it to a viewport on a layout that contains the company border / title block. If I render the model (presentation quality) to model space and send that to the printer (color laser) the print comes out in about 60 seconds or less. However, if I render the same image and quality to the viewport on the layout and send that to the printer, it takes between 10 and 15 minutes for the image to print. The layout is simple - just line workd border and title block. The images are identicla when finally printed.
Why does it take SOOOO much longer to print when with a layout as opposed to not with a layout? The rendering to screen takes the smae amount of time either way - it's just the printing procvess that is bogged down by using a layout.
AutoCAD MEP 2010
I've used batch plot to make pdf copies of my drawings in version 2004 and did not have this issue:
In 2010 when I use batch plot to pdf (say for 5 drawings), it produces one single pdf file with 5 sheets. I want an individual pdf file for each drawing (5 pdfs).
I don't want to have to open each drawing and plot. That's what batch plot is for!
I am having a problem getting PDFs to plot when I have plot transparency on.
I use the dwg to pdf plot function and with plot transparency on... my hatches work perfectly but my PDFs appears very much screened. (As a 50% or more screen would look) If I turn off the plot transparency, the pdf works perfectly but of course my hatch shades obliterate any line work beneath them.
I was able to convert the PDF to a .tiff, with a graphics program... increase the resolution to 600dpi and use imageattach to bring that in. But it is an extra step for each insert and increased dpi = increased file size.
Other than increasing the resolution on the PDF, any way around this "screening" issue on PDFs when plotting with transparency on?
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
I have found that if you publish to single-sheet .pdf's and then combine the .pdf's into one file using Acrobat, each sheet is bookmarked using the name of the individual files for the bookmark names. However, if you publish to a multi-sheet .pdf, no bookmarks are created. Is there any way to create multi-sheet .pdf's in AutoCad and have bookmarks automatically inserted (using the name of the layout as the bookmark name)?
View 3 Replies View RelatedThe Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedOur supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
I'm having trouble plotting to PDF
We normally plot to PDF using the free Cute PDF converter which is quite good although we get out of memory issues from time to time which is not so good.
We have therefore decided to use the one provided by Autodesk (DWG-PDF.PC3). The main drawings appear fine however the text we use within our title bars is awful and bloated for some reason. I've read the help file and cannot see anything relating to this issue. On the attached image the left hand side shows a PDF created with the Adesk DWG-PDF.PC3 and the one on the right is with the Cute PDF, although a different size there is a clear difference in resolution.
I created a 3D view, shaded Realistic and inserted it into a sheet that is 11x17. When I plot (whether to .PDF or our copy machine) after the plot dialog box disappears, another one pops up that says "Plot Progress: Attempting to Cancel Sheet". Then it prints everything in Paper Space, but the viewport doesn't plot. By the way, when I look at it in Plot Preview, it's perfect. Fortunately I don't need to give this to my client for another 10 minutes.
View 1 Replies View RelatedWe have a computer that has Arch 2011, 32 bit on windows 7 on it. About 6 months ago, when you go to plot, the plot dialog box takes up to 5-10 minutes to open. then if you change ploters or setups, it takes another 2 minutes. It just spins. when you are ready to plot, the plotter or copier starts as normal speed.
then another computer Arch 2011, 64 bit on window 7 start doing it about a week ago. the only thing was that windows updated the HP plotter driver and windows. It will do the same thing as above. Our copier is not an HP and the driver was not updated, but it takes forever to open the plot dialog box.
Either computer can publish. However, in all other programs, the files printer box open and print normally.
Is there a setting that was changed in autocad?
I can't plot PDF on AA 2011.
View 3 Replies View RelatedI know the possibility of a plot style just disappearing is slim to none, but I have this user that constantly claims her plot styles have "disappeared".
When I check them, the entire "Plot Style" folder is gone. One day it's there the next it's gone.
She also has this problem with the DWG to PDF print option. It was there, now it's gone. She claims she isn't deleting anything. I will get them back on her PC and a few months later they will be gone.
She is a contract worker who also spends time at her office off site. I am not sure what version of AutoCAD she is using. I manage an AutoCAD group of about 20 users and none have this problem.
I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies View RelatedI am testing the new 2012 ACA. Where do I find the Plot files this time. Seems like it changes with each new operating system or ACA release.
Intel Core i7 2600k
1155 Socket High-End Motherboard
Dual ATI Radeon 5870s
6x OCZ SSDs (RAID 1)
16GB CORSAIR Vengeance SDRAM DDR3
Corsair TX850 PSU
6x 27" ACER LED Monitors
Is there an option to eliminate AutoCAD from automatically inserting the layout tab name into the file name when creating a PDF? Once upon a time it would only use the file name (i.e. A-101). Now it uses "A-101_Layout1" (or whatever the layout name is) by default. I either have to live with it or manually change each file name during the process of creating the PDF or after it's been created.
View 1 Replies View RelatedI am new to autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?
View 1 Replies View RelatedI am currently trying to figure out how to use ACA 2012.
A client wants me to add flooring zones to a few sets but I cannot get them to print in color. I assume I do this from my pen assignment but I cannot figure out what colors they are to change them.
I do my zones by using Home>"under build" space>from the properties I click Zone 0-15>polygon and then I trace the rooms. Then it fills the room with a preassigned color. How Can i figure out what colors they are using so I can edit my pen setting or is there an easier way to print zones in color and the rest in B&W?
I am trying to locate Plot Style file. In Option: File: Printer Support File Path I get following directory:
C:Program DataAutodeskACAD 2011 enu PlotterPlot Style.
My problem is: I can not find "Program Data" any where, in "Program files" and by any search I can not see "enu".
I am trying to plot to PDF and it wont do it.
View 1 Replies View Relatedthe ctb files do not appear in the drop down list in the plot dialog box. I have checked the files and are located in the correct directory. Also have verified that the files are being pointed to in the options dialog box.
View 2 Replies View RelatedOLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies View RelatedMy office currently has a unique keynote database for each project. When I open a file with a sheet keynote legend, AutoCAD 2010 opens up the correct database and everything is fine. This is also true when I try to plot a sheet file. However, when I plot through the batch-plot process, AutoCAD does not open the correct database.
View 1 Replies View RelatedI recently downloaded student version of architecture 2011 and works great, but how do I get rid of the message that plots with my drawings, produced by autodesk education product.
View 2 Replies View RelatedIs it possible to purge page setups from the plot dialog?
ACA2011
Win7-64
I'm new to AutoCAD Architecture and I need to plot to pdf but can't find "legal" 8 1/2X14 size option.
View 1 Replies View RelatedWhat is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789