I have a small renovation project. Was able to set the Existing, Demo & New work fine - in the Construct. But when setting up the Views (i.e. A Demo Plan and a New Plan) the whole thing falls apart - I can't figure out how to turn on just the Demo plan in the Demo View; and just the New Plan in a New View.
View 1 RepliesHere it is 2013, two years after Renovation mode was integrated.
Every once in a while, I have a residential renovation and try to use this Renovation Mode. Problem is using it with PN. Works great in The Construct, but try to create a View and then stick that on a sheet - And like many other Autocad features, there is painfully little to no valuable documentation.
The question: how do you successfully use Reno.Mode with PN?
I am trying to get renovation mode to work properly. When i use it it seems to change item that existing to a new layer on color 8 (I specified color 8), but not to by layer. I want to be able to assign an item and have the color be set to by layer instead of a forced color.
It also changes everything in the drawing. Say i have multiple objects on layer A-Wall, it changes all those objects instead of just the one i select.
After I installed AutoCAD Architecture 2010, I did not see the Renovation Tool in Manage.
View 2 Replies View RelatedIm currently drawing renovation plans, sections and elevations, and i have a prexisting set of drawings, a after renovation set of drawings and would like to achieve the intersecting of this two sets with objects/lines in yellow for whats going to be demolished and red for whats being built and white for whats to remain untouched.
I started by setting a yellow color for the first set and red for the second set. And worked my way to the excrutianting task of breaking and setting this two sets of 2d drawings.
Is there a command or routine that allows me to break a line were two diferent lines overlap in the drawing. I was wandering if i could do that i then would only have to overkill the entire drawing..
in paper mode
the space outside space is white in color
and i can not find the way to change it into black and can not change it in option-->drafting
When you change a viewport to presentation mode the walls change to orange. is it possible to change this color?
View 2 Replies View RelatedDoes AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies View RelatedI would like to propose a focused thread or forum exclusively for the discussion of all things Revit and Rehab projects. There are some very frustrating things that occur when using Revit to document architecture projects in conjuction with rehab work. I am of the opinion that this is a very important area of architecture that is currently not being well documented by Revit users, Revit software vendors, Revit training specialists or by autodek itself.
The world has a huge stock of existing buildings, how can we iron out the duplicity of work that is currently required in order to use Revit in conjunction with rehab/renovation work.
I am participating in a architectural design draft, regarding renovation of an industrial building. The building is only uploaded in .DWG and .3DS, which presumably means it´s origanally drawn in Auto Cad. But when i link the DWG (ACAD) file to Revit, it treats it like a component making it impossible to edit walls, windows, making cross sections, floor plans, checking room heights etc. Is there anyway i can resolve this problem other than learning how to draw AutoCad better ?
View 2 Replies View Related“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
For some reason while in text mode, all letters stay locked in Cap mode. My cap lock key is not on?
View 1 Replies View RelatedThis may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders
I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI am running photoshop CS on my laptop which is a Compaq presario 1503 AP.
I have had this problem since I used Photoshop 7 and now Photoshop CS. When I want to go to a new paragraph or the next line using the enter key, it just doesnt work.
When I hit enter, the text just exits the text entry/edit mode.
When using the brush tool what is the difference between using the brush in color mode on a normal layer vs using the brush in normal mode on a color mode layer?
View 5 Replies View RelatedOften when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View Relatedwhat the SDI mode settings do? I was told to set my SDI to (0) by typing SDI in the command prompt so I could publish drawings. I use LDDT 2005. I typed SDI. It then prompted me to
"Enter a new value for SDI <3>:" I entered 0 and was told,
"The current setting for SDI is required by a loaded application.
Cannot set SDI to that value.
*Invalid*"
When I attempt to close a drawing I get the following message in the command bar. _CLOSE command CLOSE is not available under SDI mode. and the drawing will not close. what SDI mode is and how I can close the drawings.
View 3 Replies View RelatedWe are not hitting F9, but the Snap Mode comes on. Not sure what is causing it. Not clicking it and not hitting F9. Is there anything else that can trigger the Snap Mode to "On"?
View 6 Replies View RelatedHave been working within a new layout. Inserted border & titleblocks. Then I created several viewports and established those views. Some how now all items created on the border layer [borders/titleblocks] do not display. They do how ever plot and preview. Did i enter into some editting mode to just viewport? How do I restore?
View 5 Replies View RelatedI am trying to rotate and translate some points I imported in LD04. When I go to points-->edit points--> rotate points it asks me:
"autodesk point database setup must be in single-user mode to use command" How do I change to single mode? since I'm the only one using this computer at home.
I am not able to print in Landscape mode using autocad 2009 and Epson Workforce 1100 - printing in Model space
View 2 Replies View RelatedI am trying to UnInstall ACAD 2013 or ACAD LT 2013 French in "complete" silent mode !
C:Program FilesAutodeskAutoCAD 2013Setupfr-frSetupSetup.exe /P {5783F2D7-B001-0000-0102-0060B0CE6BBA} /M ACAD /language fr-FR
This command line run the UnInstall in inter-active mode ? (Repair / ReInstall / UnInstall)
Which is the MAGIC command line ?
I would like to change all the DOCUMENTS of the Tile Mode to 0. But, the following code the Active Document changes only. How can I modify the code?
Dim acdc As DocumentCollection = Application.DocumentManager Dim acdoc As Document = acdc.MdiActiveDocument Dim acTile As Integer = Application.GetSystemVariable("TileMode") For Each acdoc In acdc If acTile = 1 Then Application.SetSystemVariable("TILEMODE", 0) End If Next End Sub
How can I query autocad map data in preview mode,and store these objects in a collection by using C#.
(I want to use simple query like all lwpolyline having layer = "test" and color = 3). If I run this query in draw mode multiple times what will happen? (means possibilty of duplicate objects??)
I am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies View Related