AutoCAD Architecture :: Multiple Callouts To Single View File?
Jul 15, 2011
I've got a view layout for 1/8" scale floor plan. I've got 2 gang toilets that I'm trying to use the Callout tool to generate enlarged plans on a different view file.
I'm attempting to send both model views that the Callout tool would produce to a different existing view file.
Have not succeeded yet, and just throwing out the question if it can be done? Or if model views called out have to be in individual files? Don't want to waste my time if it can't be done.
View 1 Replies
ADVERTISEMENT
Oct 25, 2011
I have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies
View Related
Feb 4, 2011
How do I create Multiple Levels in a single Drawing File
View 4 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Aug 5, 2011
I changed my Publish options on the Project Navigator for publishing to PDF as a single sheet per sheet layout. Now I want to put it back so that when I publish it does ALL sheet into one PDF file and I can not figure out how to put it back. Now ever time I publish it does each sheet as a separate pdf.
View 5 Replies
View Related
May 29, 2012
I have several DXF files that I would like to bring together into a single AutoCAD file so I can put all the pieces I have together on a single screen. How do I do this?
Also, when I am able to do this, is there a way to give points to my separate objects so I can match them up with other points of other pieces that it's supposed to fit up to? I'm pretty new to AutoCAD
View 4 Replies
View Related
Dec 14, 2011
How to save IDW's with multiple sheets in to 1 single CAD file
I have IDW's whith lots of sheets and when saved to cad, I got multiple files and I always end up doing copy paste to create a single file
View 5 Replies
View Related
Jan 29, 2012
Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies
View Related
Apr 2, 2013
Our company does not have the funds to upgrade so we are stuck with CD12. I am using using a windows 7 /64 bit machine. I created this xml template for the writers to place place their graphics in our author software.
I have 4 layers on my file - grid.guide,desktop and template. The template has the instructions and size dimensions. I have them put all graphics on the high lited desktop layer then when this is complete turn off the template layer. One can print this file with just the graphics showing with no problem.
However if I export this a PNG file both the template and desktop layers show up even though I turned off all layers. I just want the desktop layer with the graphics to show up. I have been using Adobe Illustrator for several years and this doesn't present a problem when saving the graphic as a PNG file.
View 16 Replies
View Related
Jun 18, 2012
I'm in the process of creating an exploded view of an assembly. I'm having to do this in a presentation file, and I was wondering if it was possible to section one of the parts in the exploded view. To be more specific, I have the majority of my parts spread out around another assembly in the center of the page. I want to get a three quarter section view of the center assembly so the internals are visible. Is this possble from within a presentation file and if so, how can it be done?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 2 Replies
View Related
Feb 5, 2013
I have one large assembly for hose routing it consists of around 1000 hoses all hoses are coming in main assembly but delivery date is very short. My plan is work on same assembly 5 people how it works?
One idea is like working in sub assemblies but in my case only one assembly consist of all hoses.
How to work multiple users in single assembly file at same time. like in solid works enable collabarative mode.
View 2 Replies
View Related
Jul 11, 2013
I cannot xref a construct into a view dwg using PN. I get error "Could not reference file <construct> in <view>. Same problem whether I use relative or full pathing. But I can manually attach the construct using the XREF command. So I know it is not a file/folder permissions problem. What's annoying is that I did get it to work with one construct but not another.
I am using ACA 2013 and I see that there is a service pack 2 update.
View 1 Replies
View Related
Jun 29, 2004
i am trying to do is add multiple images/pictures/jpegs to a single file/document of photoshop...
I don't want to use the cut/paste thing...how do i simply add multiple images to a document i already have open?
View 1 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Jun 24, 2013
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Mar 26, 2012
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Sep 30, 2013
even in an empty scene my framerate in the quad viewport is about 7, 8 but in single view its 30-40..
I'm a little unsure if it was low like that before and I just realized now or sth. has changed. (Guess it has not been so slow as its really annoying) Using latest NVidia drivers and a 3DConnexion Navigator with 3DS Max 2013.
View 9 Replies
View Related
Jul 3, 2013
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
View 4 Replies
View Related
Jun 29, 2012
We recently upgraded to AutoCAD Architecture 2013 from Architecture 2011 and am having all sorts of intermittent issues with walls showing up as single lines in x-refs (even though the file being refrenced has been brought into 2013 and shows correctly when opened by itself). We are also having intermittent issues with the plans and walls themselfs showing as a single line. I need assistance on strightening this out as we have several jobs pending construction that are all having this issue in incosestant areas.
Additional Info: Windows XP Pro - 32 Bit
View 9 Replies
View Related
Jan 10, 2012
I'm new to Architecture Desktop (especially 2012), I dabbled with it a little bit years ago.
I'm doing a floor plan and I want to change one door to a double door. I changed the style and it changed all the doors. So I did a search and saw something about doing a style override in the "Edit Object Display." So, I checked all the "Object Override" boxes in there. Buuut...when I right click on that door and do "Edit Door Style" it still changes ALL the doors in the drawing to double doors.
View 5 Replies
View Related
Feb 4, 2012
Is there any to get the single line display into the medium or medium low rep by object? I see the only place to get it is to use the High Detail rep by object. Normally in a high detail would you not want a double line for doors? and use a single line for concept in the medium low? I would like to see the ability to have the single door in all display reps by object
View 4 Replies
View Related
Oct 26, 2011
Does AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies
View Related
Mar 4, 2011
I am beginning to use annotative scaling. I am successful when dimensioning and multileader-mtext. I like my leaders and dimension text @ 1/8". When I make my viewport scale 3"-1' all is good.
However, when i try to insert a new leader with same text style and choose block and detail callout my text doesn't completely fit in sheet # slot. There a way to change this. Block editor maybe?
View 1 Replies
View Related
May 31, 2012
I currently have 2007 installed on my computer and we just upgraded 2 of our seats to 2013. Can I install 2013 and still have 2007 on the computer? Will that screw up running either one? Will they conflict each other? I will eventually uninstall the 2007 version, but want to get 2013 up and running quickly.
View 6 Replies
View Related
Mar 18, 2013
I seem to be having an issue publishing multiple layouts into a single PDF.
All the layouts are setup to plot to 'Adobe PDF' and in the Publish options I have set 'Publish to: Plotter named in page setup' as well as 'Multi-sheet file'. When I click OK I'm prompted for the filename for each layout and have to save them as separate files.
The only time it does work is when I choose 'Publish to: PDF' which I guess uses AutoCAD's internal 'DWG to PDF' method. Is my preferred method an Adobe issue or is it fixable through AutoCAD?
View 9 Replies
View Related
Feb 12, 2013
except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
View 2 Replies
View Related
Aug 9, 2011
The drawing I just finished and need to plot is 19"L x 9-1/2"H. The printer I have here only does 8-1/2x11 sheets.
How do I plot this drawing on a 1:1 scale so it will print on multiple sheets of 8-1/2x11 to make the single complete drawing? I've tried changing the plot setting but guess I'm over my head.
View 1 Replies
View Related
Sep 16, 2011
I design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies
View Related
Nov 8, 2013
How to use a single sketch for multiple extrusions, i would create all the holes and everything in one sketch and i could reuse that sketch again and again.i totally forgot how to do this.
View 2 Replies
View Related
