My problem is that, i can only draw in the top view, but when i change the view, in the viewcube to front, left, and draw a circle or a polygon, only appears a thin line.
Before when i changue the view to another face, i can draw circles or any form. I think is something related to the UCS., and the Z axis
I was unable to fully launch Autocad2010,2012 or 2013. It would almost deploy and then disappear from the screen.Autocad support yet unable to repair. Decided to uninstall and reinstall software. I now have software fully deploying but if you draw a square it views like a rectangle.
View 2 Replies View RelatedHow do i draw dimensions in a certain 3d view so that it shows up according to that view? For example, I'm in isometric view but when i draw a dimension it shows up in 2d at wrong angle.
View 7 Replies View RelatedFor some strange reason when I got to work this morning I was unable to view items as I draw. I can see lines as I draw once I specify the first point with ortho on or off, but I can't see shapes (dimensions, circles, rectangles, ellipse, or box) while I draw. Once I select the second point the object does appear but a setting has changed and I can't figure out how to get it back to normal.
View 7 Replies View RelatedI was wondering if it exists a procedure to separate each individual 3D solid making part of a draw. I'd like to simulate an assembly like view .
View 3 Replies View RelatedI created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI've got a Profile View style set up just the way I want it. The only problem that I have is that the automated fill hatch that I'm using between my existing and finish profiles is showing up behind the grid lines. Unfortunately, we use "lines overwrite" as a standard, so I can't just switch to "lines merge". Any way or a setting that would allow me to move the draw order of the fill hatch above the grid lines?
View 5 Replies View RelatedIn order to make a 2D sketch, how can I make appear constructions lines in order to draw a top view from the main view?
View 1 Replies View RelatedHow to create an assembly exploded view of a draw with Invetron Fusion 2013.
View 0 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedI have created a profile. I have my surfaces, projected other surfaces onto it, looks good. So then, I want to do some simple drawing on my profile. Everything looks good in model space. Create a viewport for the profile and things(basic linework) appear in a different location than where I drew them. I figure I need to project an object to make it work because they are associated.
So I draw my simple arc ( arch culvert) with footings and block it. great its where i want it and its a block. Gave it the appropriate elevation when creating the block. go through the project objects and it added. But now its added it in a different spot.
I have 2 rectangles and i want to loft them by path.I want the path to be arc , but i cant draw the arc in isometric view. The objects are positioned something like thes 2 smiles. One is exactly above the other and i want to draw arc to connect them and then use loft but cant make the arc. I tried to draw the arc in Front view, but i then i couldnt use it as loft path.So how to make the arc in 3d?
View 9 Replies View RelatedIs there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies View RelatedWhen making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedHow do we draw three lines instead on one? As an architect, the exterior walls are 3-lines for brick construction. How can I draw with 3-lines instead of one in Aouto Cad 13 for Mac?
View 4 Replies View RelatedIm currently trying to draw a layout for a simple angle iron part using the front, side, and angled view. Its a flat part made of sheetmetal and it will get 1 90* bend in it.
My first question is how do i bend a part in autocad LT 2011? Ive been using autocad for years but ive never had a request for an angled view.
My second question is how would i create a layout using all 3 views and include the info block in the bottom right displaying all the info?
When I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies View RelatedI have been unable to make Draw Order work well. The attached file and other ones I created would not work. The goal is to have the boarder and text (color 7) always stay on top after it is created as a block and pasted to any drawing. After pasting it, the text go underneath the shade (color 155). I have used Draw Order, picked the objects in the order I would like, repeated the same steps inside the Block Editor and Edit Block In-Place, still, the block would not work. I never had this issue before - seem to have stared today. Don't know what else to do. The only thing that works is keep recreating the block till one works, which seldom works.
View 7 Replies View RelatedVersion: Autocad 2013
I have a problem drawing straight lines. Normally, like everyone, I will start from any given point and the line i wish to draw will snap to 0, 90 or 180 degrees. However there is now no snapping and no straight lines.
I have tried resetting SNAPANG to 0 (it is already set to 0) and this works for maybe the next 3 lines but then I am back to square one and cannot draw a straight line without constantly having to reset SNAPANG.
I've tried resetting USC to world. I've also tried changing PLAN to view and world.
I need to draw a cylindrical cam in Inventor Professional 2013. I tried using the cam module but it is not what I need. My cam can be generated by a third-degree polynomial. You could use the new "curve from equation"?
View 1 Replies View RelatedHow to change the default behavior when I draw an arc?
I want to write "arc" in the command line, and start drawing it by its center first, then its start point, and I finally the end one. I don't want the default 3 points method.
I do this faster drawing circles and trimming them, than selecting the suboptions of the arc (center, start, etc.). It should not be XD .
I have been trying to get this effect with the blend tool and many different circles/elipses. I come close but think there must be an easier way to achieve this effect.
View 2 Replies View RelatedWhy the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedWe have some details of Internal Involute Spline profile,.Now it has to be made by EDM Wire cutting,.I need the nomenclature of Internal Involute,.
I browsed in Internet and I found some details, but all of them explaining Major Dia, Minor Dia, Spline pitch, Circular Pitch, tooth Thickness, etc,.But I need how to draw the involute,Please see the attachment "How to draw this" Automated Programs are secondary, reasons,.
1. I am a Mechanical Engineer, I should know how to Draw it, also I am addict in Mechanical Engineering, so I like to know it,.
2. Installing Software's are prohibited in our organization, it can not be done without Higher officials permission, also it will take time to finish this process,.
how to create a lisp to draw the rigid insulation as attached.
View 6 Replies View RelatedCan a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables?
View 1 Replies View RelatedWhen in Orthographic view and in back, left, right, top, bottom, front view, I cannot draw an object as Cube by example. To be able to make the object I have to move a little bit my view .
Example. If I was in Ortho - Back view, I move the view a bit so it is not perfectly on the back view than it allowed me to draw object. Another way is to change to Perspective view.
why I cannot make object on straight orthographic view?
How do I get the draw order to stay the way I want when I close and reopen a drawing? I even think that a couple times, without even closing and reopening the drawing, the draw order has flipped back to the way I don't want it after changing it.
View 3 Replies View Related