At our school we've got a 60 seat network license for AutoCAD 2013. It is controlled by flexlm. Now, one of our teacher, who travels a lot, needs one of the licenses permanently on his notebook.
Can I extract one of the 60 licenses from the flexlm manager and transfer it permanently to the notebook? If yes, is there a special software for it or is there a documentation, a "how-to"?
I have several groups in our organization which utilize Autocad 2013 products, but each group buys their own licenses and utilizes a network license server.
Can I install each license file into a seperate port on same server to allow each group to use their own pool, essentially to not allow the other groups to have easy access? (We customize the install for each group to a particular lic server/port)
I am trying to transfer my profile to another computer on our network. I exported mine to the network. (.arg file) When I imported this to the new computer it did not include the toolbars that I have set up on the original computer. What do I need to do so they will be included?
View 3 Replies View RelatedSmoke 2013 looks amazing, but I can't manage to make it work both at my place and at my office. There is a problem with the stone + wire. I'm sure it has to do with the network settings or the host files, but I'm not familiar with these notions.
View 6 Replies View RelatedI am updating our stadium seating plan but the seats have no numbers on them - is there a way I can enter the seat numbers in one go or maybe a block at a time instead of entering a number on each seat?
View 9 Replies View RelatedMy currently PS license is an upgrade which I downloaded. I did not purchase the upgrade CD. I now need to re-install the product on the new machine our copy the product from the old machine to the new. How can I accomplish this?
View 1 Replies View RelatedI have a model of a plywood seat "blank" which I have trimmed by way of an extrusion cut to give the plywood seat its shape. Basically I'll use my modeled shape to CNC rout the shape into the actual blank. However, before I tie up a CNC to make my 1st part I want to create a flat pattern which I will lay on the actual plywood blank and cut it out by hand to see if the shape aesthetically works. I am trying to unfold/ unroll/ flat pattern the shape in inventor (as a sheet metal part) so I can plot it but am not able to do so successfully (fails). Is the shape to complex? I have attached an image of the blank, an image of the finished shape desired and the .ipt. I'm not an expert at sheet metal but I have successfully done this sort of thing before making flat patterns of transition cones etc so I do think I am following the correct procedure but this part is far more complex that I am used to. Also, the model of the "blank" was imported as an iges from my supplier before I made it a thickened surface so I'm afraid inventor doesn't "historically know" how it was created and therefore cannot flatten it.
View 4 Replies View RelatedWe're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
We keep things like fonts, plot styles, templates, custom menu on one of our network drives. I have noticed that we are losing these paths (in our options) quite frequently. I have checked profiles and workspaces and all seem to be correct. Is this a network issue? If our network drops connection, will these paths just go away?
View 1 Replies View Relatedhow to center a window seat that extends out like a bay window. I cannot for the life of me figure this out. I am trying to center the 6' extension between an exterior (7 1/4") and interior (4") wall. I need it to be center on both interior and exterior and do not know where to measure from to accomplish that.
View 3 Replies View RelatedI'm trying to use the sample script for single network license located at - Script
The script says it's for AutoCad even though it's located under the Revit section of the Wiki. How I can modify this to work with Revit? Something like substitue "acad" with "revit," maybe?
I seem to not be able to add a folder that is on our network for content explorer all I see is my computers folders not the servers folder. Is there away to add them? I've tried to drag and drop and it says cant find or have access to warning.
View 9 Replies View RelatedUsing the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies View RelatedWhen a pipe network is referenced into a drawing in Civil 3D 2013 there is an option to set the layer for the pipes and structures. After the layer is set, the parts go onto these layers until the network is syncronized. After the network is synronized the parts revert back to whatever layer is set in the object layers in the drawing settings.
Civil 3D 2013 SP1
HP z400 Workstation
Intel Xeon CPU W3520 @ 2.66 GHz
NVIDIA Quadro FX 580
Windows 7 64bit
12 GB RAM
Run Autocad 2013 SP2 on windows 7 boxes.
Anyway, one of our cad operators is running into the following error when he opens a particular drawing or when he audits it:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects may display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.
From what he's described to me, it sounds as if he is building this from several separate files. At some point, things go nutty, and that error develops. When the file is loaded, things are out of position, etc.
No luck in getting that error to vanish. Told him to add the individual parts one at a time, and saving versions as he works so we can, hopefully, find what is breaking everything.
Every time I open this drawing, I get this error message:"Inconsistent associative objects may display geometry and grips incorrectly and update in unespected ways when edited. You can undo to restore the associative object to its previous state."
I wonder if this is the result of one of the xref files from the civil, and what to "undo" to whatever "previous state" will prevent this popup window.
Previous searches on this error have brought up discussion of CIvil 3D grouped objects, but like I said, these are simply files we've referenced into our landscape base.
I've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies View RelatedI have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
I cannot get my program to print to any of our network printers. I am using Autocad 2013 LT with FusionWare and Windows 7 on a Macpro OSX Lion. This started being a problem a few weeks ago and the only way I can get anything printed is to make a pdf and and then print the pdf from Acrobat.
Today I brought in a HP 940c printer from home and connected it to my desktop printer. I spent an hour uninstalling and installing the drivers. I can now print from Acrobat on both the PC and Mac sides of the computer, but when I try it from Autocad I get Error_Printing in the HP printer window. No info as to what the error might be. I tried this several times, tried renaming the file with a shorter name but since the driver puts in the entire path that was a futile gesture.
So I have confirmed that the printer is functioning correctly, just not with Autocad. I realize that i do have a working workaround but it is tedius and unnecessay to keep making all those pdfs.
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
I hate having to setup one pc to all the autocad setting that we need and then having to go do 27 more. I want to take my exact setup, menu, system variables, colors, file locations...everything and apply it to 27 more computers. We have tried using profiles but it only coppies over a few things and some are still missing. Is there are way to copy everything?
View 9 Replies View RelatedI was rolling out 2013 in one of our offices during the brief time SP1 was available. I went ahead and included SP1 in the office's network deployment (using the append option) and installed on all the machines in that office. Now that SP1 has proven to to be a problem, is there any way to uninstall the SP without having to do a complete uninstall and reinstall at each machine? Tried checking thru control panel (with and without "show updates" turned on), but the SP does not appear in the list to uninstall separately.
View 2 Replies View RelatedI have files that contain only XREFs, some have up to 20. When I try to use etransmit to share these files, the paths are still looking for the network and not the contents of the zip file.They are all Overlays Full path
I swear that it worked before but I cannot replicate it.I cannot share the zipped file with anyone not connected to our network as all references are lost.
Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
I've downloaded and installed AutoCAD 2014 using one of our subscription licenses in order to review it before putting it on other machines (for the purpose of bug-checking and trying out new features). I also have a Map3D subscription license for which Autodesk offered me a free trial upgrade (for this subscription term) to Infrastructure Design Suite (IDS).
While going through the steps for installing IDS, I noticed that the IDS license includes a copy of AutoCAD. I cancelled it before installation and tried to use the LTU to export my current 2014 license. However, when I try to open the LTU, the Windows working icon spins for a bit then nothing happens. It works for my 2013 license but not 2014.
I am trying to transfer a standalone copy of autocad 2013 from one machine to another. I have already uninstalled it from the old pc, and when I got to install it on the new pc it asks for registration. When I put in the numbers it tells me that it is not valid.
How can i De-activate it from the old pc if it is already uninstalled?
When I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replies View RelatedWe have 5 seats of Autocad LT 2013 and I need to change/upgrade their pc. I need to deactivate the licenses so that i can transfer or activate to the new computer but License Export Confirmation is failed. the computer is connected to the internet. I tried many times but still no luck.
View 2 Replies View Relatedhow is possible to transfer library from local Desktop Content in Inventor 2013 do Autodesk vaulet Server 2014 and vice versa? I got an version error.
View 4 Replies View RelatedThe mother board in my old PC went out, I bought a new one with Windows 8. Loaded Autocad 13 and want to transfer all my settings from old hard drive (now a slave) to the new one.
View 7 Replies View Related