AutoCAD 2013 :: Removing Service Pack 1 From Network Deployed Installations?
Aug 31, 2012
I was rolling out 2013 in one of our offices during the brief time SP1 was available. I went ahead and included SP1 in the office's network deployment (using the append option) and installed on all the machines in that office. Now that SP1 has proven to to be a problem, is there any way to uninstall the SP without having to do a complete uninstall and reinstall at each machine? Tried checking thru control panel (with and without "show updates" turned on), but the SP does not appear in the list to uninstall separately.
View 2 Replies
ADVERTISEMENT
Sep 12, 2012
Since my AutoCAD crashes when exiting 95% of the time I thought I would install service pack 1.1. I have the 64 bit version of Autodesk Product Design Suite Premium 2013 which includes AutoCAD, AutoCAD Mechanical and AutoCAD Electrical.  It is a Windows 7 HP XW series workstation.
Everytime I try to install the service pack it does not install, and a dialog box pops up stating "The service pack could not be installed because the expected Autodesk product could not be located on your computer." To be certain I tried both the 64 bit and 32 bit service pack. What may be causing this? Is this possibly caused by the fact that in Autodesk Product Design Suite Premium, AutoCAD is kind of a burried inside AutoCAD Mechanical, somewhat like a sub-program of AutoCAD Mechanical.
View 9 Replies
View Related
Jul 23, 2013
My AutoCad 2013 is a bit unstable and crashes fairly often. Autodesk is telling me to install the 64 bit service pack. When I try to run it, I get an error code 1324 (illegal character in My Documents) and error code 1603.Â
View 3 Replies
View Related
Sep 24, 2012
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"Â
View 9 Replies
View Related
Oct 1, 2013
I am trying to get AutoCAD LT 2002 working in Windows 7. I did searching on these boards and from what I read the solution is to install the AutoCAD LT 2002 service pack (upgrading AutoCAD to verison 44) and then instal the gedit 3 compatibility patch (upgrading it from verison 44 to 47.
The problem I have is that when I run the service pack installation program (K030ltss1_K044_aclt_unl.exe) I get a message that my installation is already up to date. However when I check the version in autoCAd itself it says that it's still at version 30.
View 2 Replies
View Related
Mar 13, 2012
I am trying to install a service pack. the file is...
autocadmap3d2011lockedx86sp2
I click to install this application service pack and this error appears...
THe update could not be installed because the expected autodesk product could not ne located on your computer. Make sure that you are using the correct update for the product.
I believe I have the correct file for the product but I do not know were to go from here.
View 5 Replies
View Related
Oct 1, 2012
after install the last service pack, I can't use the MAPPOLYLINETOPOLYGON command, it works only for the first time;
also, I've personalized the acad.pgp file, changing some commands, but some don't work (as EQ=matchprop); they work right before updating
View 9 Replies
View Related
Sep 2, 2008
After installing SP3 for XP I encountered problems while opening files in Photoshop. It takes 10x times more to open GIF, JPEG, PNG and PSD files than before. While it opens, Photoshop seems to freeze and it takes up to 20 seconds until a 10x10 pixel file or a 10MB PSD file is opened. So size doesn't matter.
View 1 Replies
View Related
Apr 16, 2009
I have been using the full version now for about 6 weeks and its hopeless. I can't do anything without it crashing, oh i can open it Thank god i have CS3 .. it works fine doing all the same work. If adobe ppls read this .... Can i ask what the you are doing? - i can't believe i paid lots of $$ for this .. Photoshop CS4 is very very flakey. in the last 24 hours i have had 7 crashes from CS4 .. not one from CS3 .... Total crashes using CS4 over two machines would exceed 50-60 crashes now, it seems it cannot even make an action without crashing 5 times. Can i have a refund or can you appease me and tell me i don't have the correct service pack, not develop software for adobe and fix there problems by been on the phone to them 24/7. I would even be keen to hear I'm not alone and this is a flop.
View 1 Replies
View Related
Feb 19, 2012
I got great results with X4, until it installed the service pack this week.. Now i cannot render an mp4 without long sections 'staggering' - like a strobing effect on the entire render, the picture lurches as it plays, and things like VLC hang when scanning thru the file..
Also, the framrate i set now has little relation to the actual outcome..
The piece i am rendering fails at a different point each time - the staggering starts and thats that, framrate drops to about 2fps - utterly useless..
I have tried removing the install and re-installing, but when i do this i can clearly see by 'check for updates' that there are no updates, which means SP2 is surviving the uninstall.
I have tried every combination of every setting for days, this is a new problem directly related to the service pack..
Where can i get a manifest of the files in the service packs? i'm going to have to remove them all by hand and start again..
View 8 Replies
View Related
May 16, 2008
Photoshop CS2 may have with the latest service pack for Windows XP Pro? Photoshop is the most used program on my system and before I install SP3,
View 16 Replies
View Related
Jan 16, 2014
How do i find out which update/service pack of max i'm using. I'm currently using 2014 but cant remember if i've installed sp3.
Andy Mac Attack POW
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
View 2 Replies
View Related
Sep 6, 2013
This will not install. It cannot find PSPPro.msi and neither can I using search. I do have Service pack 2 installed. Everytime I open the program it wants me to update. I am using Windows 8.
View 1 Replies
View Related
Feb 6, 2011
I need a consensus from the forum members here regarding this Service Pack 2 update (which is named Patch3.exe). I've read that it causes problems and I've read where it doesn't. As of right now, without the patch, my version is 13.6.2.36 , I think with the patch it will be .69, or is there another patch (or version) floating around out there that is more stable?
Also, under Settings>Performance the "Use Hardeware Encoder acceleration" is grayed out. How to check that thing off and what hardware are you using to get it to show up?
View 3 Replies
View Related
Aug 26, 2013
It worked fine until the update. Now it's showing EVERYTHING.
View 2 Replies
View Related
Mar 16, 2010
How to fix this error message in Windows XP service Pack 3?
It does not allow me to use my Corel 13 and causes problems in Corel 8.I've already unchecked the Install files for Asian languages, but to no avail.
View 11 Replies
View Related
Sep 18, 2011
Is it possible to Remove Service Pack Updates?
View 2 Replies
View Related
Nov 7, 2013
While downloading the latest Service Pack 1, I get a fault-message (see attachment)
Even after deleting and re-installing Corel PSP X6 (version after initial install = 16.1.0.48)
Tried to download the SP through the program itself, but even from the download from the Corel server, i have the same result !
View 13 Replies
View Related
Aug 22, 2013
2014.
Try to Sign In.
See Connecting message for 2 seconds.
Then.. message: Requested service not available
Checked system clock and zone, appears to be correct.
IT department state that a proxy is not being used, direct internet available.
View 8 Replies
View Related
Feb 20, 2013
I have installed AutoCAD in few of the machines using one of the User id.Â
Now i would like to know, on how many machines AutoCAD is installed using that user id.Â
Where I can get information on this.Â
View 4 Replies
View Related
Aug 14, 2013
We're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012Â / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
View 9 Replies
View Related
Jul 17, 2013
We keep things like fonts, plot styles, templates, custom menu on one of our network drives. I have noticed that we are losing these paths (in our options) quite frequently. I have checked profiles and workspaces and all seem to be correct. Is this a network issue? If our network drops connection, will these paths just go away?Â
View 1 Replies
View Related
May 3, 2009
when I install any product CS3 or CS4. When the program starts establishing, a window appears in the one that says " verifying the profile of the system " but the window being blocked always to 90 %.
View 1 Replies
View Related
Jan 7, 2013
I seem to not be able to add a folder that is on our network for content explorer all I see is my computers folders not the servers folder. Is there away to add them? I've tried to drag and drop and it says cant find or have access to warning.
View 9 Replies
View Related
Nov 20, 2013
Using the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies
View Related
Dec 11, 2012
When a pipe network is referenced into a drawing in Civil 3D 2013 there is an option to set the layer for the pipes and structures. After the layer is set, the parts go onto these layers until the network is syncronized. After the network is synronized the parts revert back to whatever layer is set in the object layers in the drawing settings.Â
Civil 3D 2013 SP1
HP z400 Workstation
Intel Xeon CPU W3520 @ 2.66 GHz
NVIDIA Quadro FX 580
Windows 7 64bit
12 GB RAM
View 5 Replies
View Related
Jul 23, 2013
Run Autocad 2013 SP2 on windows 7 boxes.
Anyway, one of our cad operators is running into the following error when he opens a particular drawing or when he audits it:
Associative Network Evaluation Error
   The object cannot be resolved or value limit has been exceeded.
   Inconsistent associative objects may display geometry and grips incorrectly and update in unexpected ways when edited.  You can undo to restore the associative object to its previous state.
From what he's described to me, it sounds as if he is building this from several separate files. Â At some point, things go nutty, and that error develops. Â When the file is loaded, things are out of position, etc.
No luck in getting that error to vanish. Told him to add the individual parts one at a time, and saving versions as he works so we can, hopefully, find what is breaking everything.
View 4 Replies
View Related
Mar 13, 2013
Every time I open this drawing, I get this error message:"Inconsistent associative objects may display geometry and grips incorrectly and update in unespected ways when edited. You can undo to restore the associative object to its previous state."
I wonder if this is the result of one of the xref files from the civil, and what to "undo" to whatever "previous state" will prevent this popup window.
Previous searches on this error have brought up discussion of CIvil 3D grouped objects, but like I said, these are simply files we've referenced into our landscape base.
View 3 Replies
View Related
Apr 11, 2012
I've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
View 9 Replies
View Related
Aug 13, 2013
I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies
View Related
Apr 22, 2013
I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
View 3 Replies
View Related
