VideoStudio :: Service Pack And Hardware Encoder
Feb 6, 2011
I need a consensus from the forum members here regarding this Service Pack 2 update (which is named Patch3.exe). I've read that it causes problems and I've read where it doesn't. As of right now, without the patch, my version is 13.6.2.36 , I think with the patch it will be .69, or is there another patch (or version) floating around out there that is more stable?
Also, under Settings>Performance the "Use Hardeware Encoder acceleration" is grayed out. How to check that thing off and what hardware are you using to get it to show up?
View 3 Replies
ADVERTISEMENT
Feb 19, 2012
I got great results with X4, until it installed the service pack this week.. Now i cannot render an mp4 without long sections 'staggering' - like a strobing effect on the entire render, the picture lurches as it plays, and things like VLC hang when scanning thru the file..
Also, the framrate i set now has little relation to the actual outcome..
The piece i am rendering fails at a different point each time - the staggering starts and thats that, framrate drops to about 2fps - utterly useless..
I have tried removing the install and re-installing, but when i do this i can clearly see by 'check for updates' that there are no updates, which means SP2 is surviving the uninstall.
I have tried every combination of every setting for days, this is a new problem directly related to the service pack..
Where can i get a manifest of the files in the service packs? i'm going to have to remove them all by hand and start again..
View 8 Replies
View Related
Sep 2, 2008
After installing SP3 for XP I encountered problems while opening files in Photoshop. It takes 10x times more to open GIF, JPEG, PNG and PSD files than before. While it opens, Photoshop seems to freeze and it takes up to 20 seconds until a 10x10 pixel file or a 10MB PSD file is opened. So size doesn't matter.
View 1 Replies
View Related
Apr 16, 2009
I have been using the full version now for about 6 weeks and its hopeless. I can't do anything without it crashing, oh i can open it Thank god i have CS3 .. it works fine doing all the same work. If adobe ppls read this .... Can i ask what the you are doing? - i can't believe i paid lots of $$ for this .. Photoshop CS4 is very very flakey. in the last 24 hours i have had 7 crashes from CS4 .. not one from CS3 .... Total crashes using CS4 over two machines would exceed 50-60 crashes now, it seems it cannot even make an action without crashing 5 times. Can i have a refund or can you appease me and tell me i don't have the correct service pack, not develop software for adobe and fix there problems by been on the phone to them 24/7. I would even be keen to hear I'm not alone and this is a flop.
View 1 Replies
View Related
Oct 1, 2013
I am trying to get AutoCAD LT 2002 working in Windows 7. I did searching on these boards and from what I read the solution is to install the AutoCAD LT 2002 service pack (upgrading AutoCAD to verison 44) and then instal the gedit 3 compatibility patch (upgrading it from verison 44 to 47.
The problem I have is that when I run the service pack installation program (K030ltss1_K044_aclt_unl.exe) I get a message that my installation is already up to date. However when I check the version in autoCAd itself it says that it's still at version 30.
View 2 Replies
View Related
May 16, 2008
Photoshop CS2 may have with the latest service pack for Windows XP Pro? Photoshop is the most used program on my system and before I install SP3,
View 16 Replies
View Related
Jan 16, 2014
How do i find out which update/service pack of max i'm using. I'm currently using 2014 but cant remember if i've installed sp3.
Andy Mac Attack POW
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
View 2 Replies
View Related
Sep 6, 2013
This will not install. It cannot find PSPPro.msi and neither can I using search. I do have Service pack 2 installed. Everytime I open the program it wants me to update. I am using Windows 8.
View 1 Replies
View Related
Mar 13, 2012
I am trying to install a service pack. the file is...
autocadmap3d2011lockedx86sp2
I click to install this application service pack and this error appears...
THe update could not be installed because the expected autodesk product could not ne located on your computer. Make sure that you are using the correct update for the product.
I believe I have the correct file for the product but I do not know were to go from here.
View 5 Replies
View Related
Sep 12, 2012
Since my AutoCAD crashes when exiting 95% of the time I thought I would install service pack 1.1. I have the 64 bit version of Autodesk Product Design Suite Premium 2013 which includes AutoCAD, AutoCAD Mechanical and AutoCAD Electrical.  It is a Windows 7 HP XW series workstation.
Everytime I try to install the service pack it does not install, and a dialog box pops up stating "The service pack could not be installed because the expected Autodesk product could not be located on your computer." To be certain I tried both the 64 bit and 32 bit service pack. What may be causing this? Is this possibly caused by the fact that in Autodesk Product Design Suite Premium, AutoCAD is kind of a burried inside AutoCAD Mechanical, somewhat like a sub-program of AutoCAD Mechanical.
View 9 Replies
View Related
Mar 16, 2010
How to fix this error message in Windows XP service Pack 3?
It does not allow me to use my Corel 13 and causes problems in Corel 8.I've already unchecked the Install files for Asian languages, but to no avail.
View 11 Replies
View Related
Sep 18, 2011
Is it possible to Remove Service Pack Updates?
View 2 Replies
View Related
Nov 7, 2013
While downloading the latest Service Pack 1, I get a fault-message (see attachment)
Even after deleting and re-installing Corel PSP X6 (version after initial install = 16.1.0.48)
Tried to download the SP through the program itself, but even from the download from the Corel server, i have the same result !
View 13 Replies
View Related
Oct 1, 2012
after install the last service pack, I can't use the MAPPOLYLINETOPOLYGON command, it works only for the first time;
also, I've personalized the acad.pgp file, changing some commands, but some don't work (as EQ=matchprop); they work right before updating
View 9 Replies
View Related
Jul 23, 2013
My AutoCad 2013 is a bit unstable and crashes fairly often. Autodesk is telling me to install the 64 bit service pack. When I try to run it, I get an error code 1324 (illegal character in My Documents) and error code 1603.Â
View 3 Replies
View Related
Sep 24, 2012
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"Â
View 9 Replies
View Related
Aug 31, 2012
I was rolling out 2013 in one of our offices during the brief time SP1 was available. I went ahead and included SP1 in the office's network deployment (using the append option) and installed on all the machines in that office. Now that SP1 has proven to to be a problem, is there any way to uninstall the SP without having to do a complete uninstall and reinstall at each machine? Tried checking thru control panel (with and without "show updates" turned on), but the SP does not appear in the list to uninstall separately.
View 2 Replies
View Related
Aug 26, 2013
It worked fine until the update. Now it's showing EVERYTHING.
View 2 Replies
View Related
Dec 27, 2010
X3 on Windows 7 (can replicate this on both Home Premium and Pro). I migrated from XP and am very very happy with the way X3 runs on Windows 7 but I am having a big problem. I had a library of customized Windows Media Encoder settings (different bit rates, frame sizes, etc.) for output as .WMV files. When I try to copy or customize any of the existing encoder profiles (which all work just fine) the system does not allow me to save. I have set full permissions for the logged user and made sure the directory is not read only.
View 14 Replies
View Related
Jul 30, 2010
I've had this problem for a few weeks now. Customer Service has been unable to provide a fix (ie complete uninstall, re-installing from scratch, new drivers, etc). I have a fairly new I7 with lots of memory and disk space and an ATI HD4670 video card that is capable of hardware encoding acceleration....I run Vista 64 bit. I also have another software package on the computer that uses this feature okay.
Corel advertises hardware encoding as a big featuire of this release of Videostudio (X3 Pro).
View 7 Replies
View Related
Dec 13, 2010
I've been using VideoStudio Pro X2 for the past 2 years and it has been working just fine since, up until mid last week. I was rolling right along, creating MPEG-2's of the Classic 39 Honeymooners episodes, until I got up to Episode 24, when I started getting the 'Failed to open the MPEG encoder' error message. I searched through this forum to find any possible solution and the only solutions I found were to check to see if the MPEG-2 encoder CODEC is installed, which it appears to be according to the InstalledCodec utility and to uninstall/reinstall VS, which I did. I still receive the same error message, however. What could cause it to go from working one moment, to not working the next?
I tried to attach a text file listing all of the installed codecs on my system, so you can look to see if the needed codecs are installed, however I was unable to attach the file...says 'extension not allowed'. How to upload the file.
View 5 Replies
View Related
May 22, 2012
I downloaded the trial for Video Studio X5 and have managed to make a few videos already with it (mostly desktop screen recordings in 1080p). However, after realizing how slow my renderings were, I toyed around with the settings and noticed that the Enable Hardware Encoder option is greyed out. Meaning that I cannot enable it. I can, however, enable other Hardware acceleration features.
I'm not totally sure what the issue might be since I'm pretty sure my GPU supports this feature ... or does it? Or could it be a limitation of the trial version ... ?
Currently, I'm running:
+ Windows 7 64-bit
+ EVGA Nvidia GTX 670 2GB
+ Intel i7-3770 Ivy Bridge
+ 16 GB DDR3 1600
Other hardware information can be found in my profile.
Also, system information as sourced from the Nvidia control panel:
Select allNVIDIA System Information report created on: 05/22/2012 00:53:28
System name: BODHUM
[Display]
Operating System:Â Â Windows 7 Ultimate, 64-bit (Service Pack 1)
DirectX version:Â Â 11.0
GPU processor:Â Â Â Â GeForce GTX 670
[Code]....
View 2 Replies
View Related
Jun 29, 2011
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
View 1 Replies
View Related
Oct 4, 2013
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies
View Related
Aug 19, 2012
I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
View 3 Replies
View Related
Jun 28, 2011
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
View 2 Replies
View Related
Mar 13, 2011
Having learned the drill with VS Pro X3, I went right to the "Do More" tab to download Extra Templates, Font Packs, and Title Packs after completing my new VS Pro X4 installation. Almost all of the "Free" packs downloaded and installed as expected without incident. (The word INSTALLED now appears under each successfully installed pack in the list of downloaded elements which originally showed a button reading DOWNLOAD NOW.)
However, for some unexplained reason, when I click my mouse on the DOWNLOAD NOW button for Font Pack 2, I see a very brief busy icon, followed by no noticeable response from the server. No error message is given.
I have tried closing VS Pro X4 and then relaunching the app before attempting to download Font Pack 2. I have tried closing VS Pro X4 and then rebooting my PC before relaunching the app and attempting to download Font Pack 2. Neither tactic succeeded.
View 11 Replies
View Related
Feb 28, 2011
I just installed VS X4. whats the difference between the Content pack and the Bonus Pack?
The Content pack is obvious as they showed up in the "Samples" Library however cant find any documentation to tell me what the Bonus pack is.
View 4 Replies
View Related
Nov 30, 2013
This weekend I went to render the fist vidoe and gotr an error message. "Could not complete the Render Video command because of a problem with Adobe Media Encoder".Â
I amusing the default settings in the render menu. Adobe media encoder - Quicktime - animation hight quality - document size 1920 x1080 - document frame rate 29.97 - field order progressive - aspect document 1.0 - all frames.
View 5 Replies
View Related
Oct 11, 2012
I recently installed Creative Suite CS6 Design & Web Premium. I had previously installed the CS5 version and had not un-installed it. Everything except Acrobat appeared to install correctly. When I opened Photoshop CS6 (64-bit) I noticed that it used the CS5 version Bridge.
I went into Bridge and unchecked the open at start box, closed Bridge and Photoshop and re-opened Photoshop CS6 (64-bit). When I tried to lunch Bridge from Photoshop the following message appeared in the Desktop> panel : Waiting for Bridge CS6..." Bridge CS6 did not appear despite waiting for several minutes.
I then pressed the Start button and went into the Programs listing. Under the Adobe CS6 group I found all of the applications (other than Acrobat) but Bridge CS6 (64-bit), Bridge CS6, and Media Encoder each had generic icons rather than the expected relevant Adobe icons. I tried to load each of the three by clicking on the icon. In each instance the following message appeared:
The version of this file is not compatible with the version of Windows you are running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program and then contact the software publisher.
Â
My system is a Gateway FX6802. I am running Windows 7 Home Premium version 6.1.7601, Service Pack 1, Build 7601.The system has 9 GB of memory. I ran CS5 on the system and did not experience any difficulty with Bridge.
View 2 Replies
View Related
Jun 21, 2013
I'v graded a video clip with a camera raw smart filter applied to it. I try to render it out in AME and it only renders 1 frame for the length of the video.Â
View 2 Replies
View Related
